MENU
#08249
Water detection cable sensor (Vutlan VT591)
The sensor informs about occurance of water or other liquids when it comes into contact with the WLC detection cable attached to the sensor.
The cable is placed under the raised floor, cabinets, air conditioners, etc.
The VT-WLC detection cable is necessary for the sensor.
The sensor is incompatible with the VT-WDC cable.
The cable is placed under the raised floor, cabinets, air conditioners, etc.
The VT-WLC detection cable is necessary for the sensor.
The sensor is incompatible with the VT-WDC cable.
| Connection |
Can be connected via RJ-11 cable to each control unit. Determination of the sensor type and connection takes place automatically. At the end of the sensor, connect the 2-wire VT-WLC detection cable. |
|---|---|
| Maximum distance from the controller | 100m |
| The maximum length of the detection cable track | 225m |
| Set includes |
sensor, cable, terminal strip type TBW-5-2p, screw 4.8×16mm, double sided sticker, VT-WLC adapter |
| Net weight | 60g |
| Dimensions (LHW) | 60×18×18mm |
#08236
Wind velocity meter (Vutlan VT550)
Sensor made for monitoring of air conditioners, fans, etc. Sensor controls airflow in the range of 0 - 3 m/s.
| Connection | The sensor is connected to the controller by the RJ-11 network cable. Determination of the sensor type and connection takes place automatically. Sensor response time 0.1s |
|---|---|
| Max. distance | 50m |
| Net weight | 106g |
| Dimensions | 60×18×18mm |
| Power Consumption | 60mW |
| Supply includes |
Sensor converter, airflow sensor, mounting bracket, 2m RJ11/RJ12 cable, screws, nuts, bolts and a sticker. |
#08295
Humidity and temperature sensor (Vutlanl VT490)
Digital sensor made for monitoring temperature and humidity inside buildings, rack cabinets, etc.
| Technical specifications | |
|---|---|
| Measured temperature range | -10 ÷ 80°C |
| Accuracy | ±0.4°C in –10 to 85 °C range |
| Measured humidity range | 0 - 95%RH |
| Accuracy %RH | ± 3% RH in 0 to 80% range |
| Maximum distance from the appliance | 225m |
| Features | |
| Connection |
Sensor's jack RJ-12 is connected to CAN input of any system unit or to a CAN output of another sensor using RJ-12 patch cable. Determination of sensor's type and connection occur automatically. The system enables connecting multiple sensors to a linear layout. For this purpose, each sensor is equipped with two RJ-12 input and output sockets. |
| Net weight | 160g |
| Dimensions | 68 × 47 x 26 mm |
#08145
Pressure, humidity and temperature sensor (Vutlan VT450)
Digital sensor made for monitoring temperature, humidity and pressure.
| Communications | |
|---|---|
| Sesnor type | CAN digital sensor |
| Inputs/Outputs | 2x RJ11 6p4c |
| Daisy chain |
Yes, a daisy chain is possible for all CAN sensors. |
| Max. distance from the monitoring unit | 225m |
| LED indicators | Red / Green (RUN/ERROR) |
| Accuracy | |
| Pressure RMS noise | 0.2Pa (equivalent to 1.7cm) |
| Pressure error | ±0.25% (equivalent to 1m at 400m height change) |
| Pressure from °C | ±1.5Pa/K (equivalent to ±12.6cm at 1 °C temperature change) |
| RH accuracy | ± 3% RH (max) |
| Hysteresis | ≤2% RH |
| Response time | 1s |
| Temperature | 1.5°C |
| Environmental | |
| Pressure range | 300 to 1100 hPa |
| Working temperature range | −40 to +85 °С |
| Humidity operating range | 0 to 95% RH |
| Power Requirement | |
| Power input |
12V DC, 1A (power supplied on a CAN bus chain) |
| Current consumption | 1 Watt |
| Mechanics | |
| Dimensions | 68x47x26 mm |
| Packaging weight | 160 g |
#08237
Smoke, humidity and temperature sensor (Vutlan VT460)
Digital sensor made for monitoring temperature and humidity and detecting smoke inside buildings, rack cabinets, etc.
| Technical specifications | |
|---|---|
| Smoke sensitivity | 0,05 - 0,2 db/m |
| Response time | 10 sec |
| Measured temperature range | -10 to +75 °C |
| Accuracy | ±0.4°C in –10 to 85 °C range. |
| Measured humidity range | 0 - 95%. |
| Accuracy %RH | ± 3% RH in range of 0 - 80% |
| Maximum distance from the appliance | 225m |
| Features | |
| Installation | On the bottom there are mounting holes for fastening the smoke sensor to the surface using screws 4.8×20mm or/and bracket and M4 screws. |
| Connection | Sensor's jack RJ-12 is connected to CAN input of any system unit or to a CAN output of another sensor using RJ-11 patch cable. Determination of sensor's type and connection occur automatically. Monitoring system allows connection of up to 40 smoke sensors into a linear circuit. |
| Set includes |
Sensor, 3-wired shielded patch cable RJ12 (2m), bracket, 2 screws and 2 nuts M4, 2 screws 4.8×20mm, double sided sticker. |
| Net weight | 310g |
| Dimensions (LHW) | Ø100×45mm |
#08117
AC current transducer (Vutlan HAT-100Q1)
The clamp sensor enables the measurement of alternating current in the range of up to 100A. Itr can be used together with a VT407 converter (#08116).
| Connection: | |
|---|---|
| Power input | -12V / +12V |
| Outputs | 4 pin terminal |
| Power Consumption | 1 Watt |
| Operating temperature | -10°C ÷ 80°C |
| Operating humidity |
5% ÷ 95%, non-condensing |
| Net weight | 150g |
| Dimensions (LHW) | 68 × 47 x 26 mm / 60 × 61 × 16 mm |
#08116 HAT sensor transducer 0-5V DC (Vutlan VT407)
#08264
Alarm beacon (Vutlan VT103)
The VT103 indoor optical-acoustic siren is dedicated to work with Vutlan environmental parameters monitoring units.
| Technical specifications | |
|---|---|
| Rated voltage | 12V |
| Sound pressure | 108 dB |
| Tone frequency | 3.8 kHz |
| Flash frequency | 150 / min |
| Net weight | 140g |
| Dimensions (LHW) | 70 x 36 x 56 mm |
#08344
Alarm beacon (Vutlan VT105)
The 12V VT105 indoor optical-acoustic siren is dedicated to work with Vutlan environmental parameters monitoring units.
| Technical specifications | |
|---|---|
| Rated voltage | 12V |
| Flash frequency | 90 / min |
| Net weight | 110g |
| Dimensions (LHW) |
73 x 45mm, cable 3m |
#03880
CAN-12V-1A / CAN Power Supply Module
Increases the number of CAN sensors connected on a CAN bus chain. Supplies power for a maximum of 15 additional sensors. Needed only if the number of sensors in a CAN bus chain is greater than 12 sensors.
| Technical specifications | |
|---|---|
| Type | Power supply for CAN bus chain |
| Input | RJ11 6P4C CAN port ⌀3.4/1,35 mm 12V |
| Otuput | RJ11 6P4C CAN port |
| Daisy chain | Allows daisy chain |
| Max. q-ty of CAN sensors powered | 15 |
| LED indicators | Green (Status On/Off) |
| Environmental | |
| Working temperature range | −40 °C to +100 °C |
| Humidity operating range | 0-95% RH |
| Mechanics | |
| Dimensions | 68 x 67 x 26,2 mm (LxWxH) |
| Packaging weight | 190g |
| Mounting options |
Desktop, Wall mount, Indoor |
#08390
Converter 4-20mA (Vutlan VT420)
Converter of current loop 4-20mA is used for measurement of constant current on 4-20mA outputs of sensors and converting data into a IP monitoring system format. The system interface allows you to assign the sensor and to introduce the function data conversion.
Galvanic isolation of 3 kV between I/O is used in a receiver.
Galvanic isolation of 3 kV between I/O is used in a receiver.
Page 3 of 6
|
