MENU
#03127
Rechargeable backup battery (Vutlan VT-ACCU)
Rechargeable backup battery is an extension module that can be purchased separately. It is used for VT604t, VT825t, and VT855t. While in operation, the batteries are charged. If the power input drops. The unit will detect a voltage drop and work from VT-ACCU rechargeable batteries until the batteries are discharged.
#03130
Rechargeable backup battery (Vutlan VT-ACCU) + 2x 3.7V battery
Rechargeable backup battery is an extension module that can be purchased separately. It is used for VT604t, VT825t, and VT855t. While in operation, the batteries are charged. If the power input drops. The unit will detect a voltage drop and work from VT-ACCU rechargeable batteries until the batteries are discharged.
2pcs LI-ION 3.7V 740mAh batteries included.
2pcs LI-ION 3.7V 740mAh batteries included.
#03107
Relay contact 5A (Vutlan VT11)
Relay switchable contact. Can be used together with equipment, for example for switching ON/OFF air conditioners. Can control power for magnetic locks, bolt locks, solenoid electromagnets, siren, light source, heater and etc.
Can be connected to any monitoring system or device with 12V outputs.
Can be connected to any monitoring system or device with 12V outputs.
| Technical specifications | |
|---|---|
| Max. switching voltage | 250VAC / 30VDC |
| Max switching current | 5A |
| Max. switching power | 1250VA / 150W |
| Min. contact load |
No gold plated, 5VDC 10mA |
| Features | |
| Max distance | 200m |
| Power Consumption | 12mW |
| Net weight | 60g |
| Dimensions (LHW) | 60×18×18mm |
| Operating temperature | Min. -50° C - Max.+105° C |
| Package includes |
x2 wire cable (1 meter), screw M5 L15mm, x1 3.81mm 2P terminal, x1 5.0 2P terminal, sticker |
.jpg?1737034351)
#08297
RFID Card (Vutlan VT108)
Unique proximity cards for VT107 card readers.
| Technical specifications | |
|---|---|
| Rated voltage | 12V |
| Memory | 64bit |
| Frequency | 125 kHz |
| Standard | EM4100 |
| Net weight | 7g |
| Dimensions (LHW) | 86 x 59 x 1 mm |
Accessories:
#08269 RFID Card reader (Vutlan VT107)
#08269 RFID Card reader (Vutlan VT107)
#08269
RFID Card reader (Vutlan VT107)
Proximity card reader for contactless reading data from RFID cards (Unique standard). Dedicated for VT855i/VT855ii & VT960i/VT960ii.
| Technical specifications | |
|---|---|
| Rated voltage | 12V |
| Current | 30 - 55 mA |
| Frequency | 125 kHz |
| Range response | 15 cm |
| Net weight | 100g |
| Dimensions (LHW) | 82 x 82 x 22 mm |
#08297 RFID Card (Vutlan VT108)
#03126
SE Mini Reader
Versatile miniature reader for proximity identifiers. Highly secure, open technology OSDPv2 reader. Resistant against moisture, dust, and vandal-proof. Easy to configure. Works with Mifare Plus cards in SL3 security mode.
#03135
Sensor extension unit (Vutlan VT408)
The VT408D Extension unit increases the number of analog sensors connected to any Vutlan monitoring device. All connected sensors are automatically detected and integrated into the system. CAN devices can be connected in a chain. DIN mounting.
| Number of analog ports |
8, RJ11 6P4C CAN ports |
|---|---|
| Number of CAN ports | 2 |
| Maximum bus length | 225 meters |
| Maximum analog sensor cable length |
50-150 meters, depending on the sensor type |
| Installation | DIN mounting 7mm (0.28in) / 15mm (0.59in) |
| Connection | Can be connected via RJ-12 cable to the CAN input of the control unit or another CAN sensor. The module is automatically detected on the first connection. |
| Set includes |
module, CAN cable RJ-11 (2m), 12VDC power adapter |
| Dimensions (LHW) | 129×56×28,6 mm |
Unit: pcs VAT: 23%#08288
Sensor unit (Vutlan VT408)
Module allows to increase the number of sensors connected to the Vutlan master module. The expansion unit is connected to the CAN connector of the controller.
| Number of analog ports | 8 |
|---|---|
| Number of CAN ports | 2 |
| Maximum bus length | 225 meters |
| Maximum analog sensor cable length |
50-150 meters, depending on the sensor type |
| Installation | In the lower part of the casing there are Ø 5 mm holes for mounting the module, |
| at a distance of 50 mm and 89 mm from the center. The cable is connected to the connector on the side wall. | |
| Connection | Can be connected via RJ-12 cable to the CAN input of the control unit or another CAN sensor. The module is automatically detected on the first connection. |
| Set includes |
module, CAN cable RJ-12 (2m), 3.5x16mm screws |
| Net weight | 0.6 kg |
| Dimensions (LHW) | 110×68×40 mm |
#08204
USB100 / USB dome camera
USB UVC/MJPEG digital camera with high resolution and with IR Leds for direct connection to the VUTLAN system controller.
It allows to view the monitored room on an ongoing basis as well as send a video sequence to an email address in response to a defined event.
In addition, the camera connected to the VUTLAN controller is visible in the network at a dedicated URL, allowing to capture the video stream just like from an IP camera (MJPEG stream).
It allows to view the monitored room on an ongoing basis as well as send a video sequence to an email address in response to a defined event.
In addition, the camera connected to the VUTLAN controller is visible in the network at a dedicated URL, allowing to capture the video stream just like from an IP camera (MJPEG stream).
| HARDWARE FEATURES: | |
|---|---|
| Interface | USB format(Complies with USB 2.0 |
| CAMERA: | |
| Image Sensor | 1/4" Color CMOS H62 |
| Resolution | 1.0 Megapixel (640 x 480) |
| Minimum Illumination | 0.01 Lux @ F1.2 |
| VIDEO/IMAGE: | |
| Video Compression | MJPEG |
| Frame Rate & Resolutions |
Max. 20 fps at 640x480 (VGA), Max. 20 fps at 320x240 (QVGA) |
| Video Streaming | Controllable Frame Rate |
| OTHERS: | |
| Cable lenght | 5m |
| Operating Temperature | 0°C∼ 40°C (Humidity 0% RH∼ 80% RH) |
| Weight | 550g |
#03128
VT-BAT / Reservation battery 9V
"VT-BAT / Reservation battery 9V" keeps the device operational while the main power source is disabled. The device uses a non-rechargeable 6F22 9V lithium battery. The Vutlan monitoring system may work from this battery for approximately 1 to 10 hours.
A 9V is not included. You can use a 9V battery enclosed in a standard PP3 enclosure.
A 9V is not included. You can use a 9V battery enclosed in a standard PP3 enclosure.
Page 5 of 6
|
