MENU
#03867
Cable tester RJ-45 LCD with PoE 802.3af, 802.3at indication (NOYAFA NF-488)
The Noyafa NF-488 is an indispensable device for testing PoE installations. The device recognizes which lines have voltage, gives its value and determines the PoE standard. They can also be connected in series between the switch and the powered device, thanks to which it is possible to obtain information about the current consumption and the power consumed by the receiver.
In addition to PoE testing, the NF-488 performs a standard wiremap test to validate the wiring.
In addition to PoE testing, the NF-488 performs a standard wiremap test to validate the wiring.
| Display | 128x64mm backlit LCD |
|---|---|
| Tested cabling | RJ45 |
| PoE voltage range | DC 5 - 60V |
| Recognized standards |
802.3af, 802.3at, nonstandard |
| Current measurement | 0 - 3A |
| Power measurement | 0 - 18W |
| Detected failures |
incorrect connections, short circuits and interruptions in the wiring |
| Battery type | 3x1.5V AAA |
| Packaging |
cardboard, case |
The set includes: etui, tester, terminator, set of 15cm measuring connectors.
Batteries are not included.
Batteries are not included.
#03052
Cable tester RJ-45, RJ-11 with PoE indication (NOYAFA NF-468PF)
A simple diode tester which enables checking the correctness of the plugs in computer and telephone connections. It is additionally equipped with a PoE voltage indicator.
The device uses diode indicators to inform whether and on which pairs there is PoE voltage.
The device uses diode indicators to inform whether and on which pairs there is PoE voltage.
| Tested cabling |
RJ45, RJ 11 |
|---|---|
| Detected failures |
incorrect connections, short circuits and interruptions in the wiring |
| Scanning modes | normal and slow |
| Power | 9V 6F22 battery |
| Packaging | Blister |
Batteries not included.
#03050
Cable tester RJ-45, RJ-11, BNC, USB w/external terminator (NOYAFA NF-3468)
| Tested cables |
UTP, STP, USB, coaxial, phone cables |
|---|---|
| Detected failures |
incorrect connections, short circuits and interruptions in the wiring |
| Additional functions | Automatically recognizing terminator's impedance for 10Base-2 and 10Base-5 standards |
| Kit includes |
tester, case, adapter for BNC terminators |
| Power | 9V 6F22 battery |
| Manufacturer | NOYAFA |
Batteries not included.
#03883
Cable tester RJ-45 and Optical Power Meter, w/LCD, wire tracker, VFL (NOYAFA NF-8508)
Advanced cable tester that performs standard copper cable tests - wiremap, PoE test and length. Additionally fiber ports to perform optical power measurements and VFL. The other benefits are large colour LCD display
| Tested cabling |
RJ45, RJ11, fibre optic (2.5mm SC;ST;FC ferrule) |
|---|---|
| Functionality |
location of the damage site, cable length measurement, detection of short circuit; interruptions; reverse connections, measurement of the distance to damage, dynamic calibration of cable lenght measurement, temperature compensation, sound signaling |
| Wiring tests |
cable lenght, connection map, digital pair finder with generator, light pen |
| Fiber optic tests |
OPM -70..+10dBm 850/1300/1310/1490/1550/1625nm, VFL 10mW |
| Cable length measurement | 10÷200m |
| Measurement of the distance to damage | yes |
| PoE tests |
Standard/Non standard, voltage measurement, automatic detection, 60V max |
| Wire tracker |
digital, analogue 455kHz |
| Ergonomics |
big and clear LCD display, automatic shutdown, long operating time, measuring data memory |
| Power |
in-built 1500mAh battery, USB-C charging |
| Dimensions |
148x70x32 mm (main), 198x50x28 mm (reciever) |
| Warranty | 12 months |
| Manufacturer | NOYAFA |
The kit includes:
- main unit,
- wire pair tracker,
- USB A (M) - USB-C (M) connector,
- crocodile clips,
- RJ45-RJ45 and RJ11-RJ11 connectors,
- case.
Do not connect the tester or terminators to networks with voltage> 20V.
- main unit,
- wire pair tracker,
- USB A (M) - USB-C (M) connector,
- crocodile clips,
- RJ45-RJ45 and RJ11-RJ11 connectors,
- case.
Do not connect the tester or terminators to networks with voltage> 20V.
#03081
Cable tester RJ-45, w/LCD and 8 external terminators (NOYAFA NF-8108M)
The NF8108 cable tester is used to measure cable continuity. It enables the measurement of connection errors in UTP / STP twisted pairs. The device is equipped with an LCD display.
| Display | LCD (53x25mm) |
|---|---|
| Frequency of the audible signal | 225Hz (after connecting the terminator) |
| Max. length of the tested cabling | 300m |
| Length measuring accuracy | 95% |
| Max. current | <70mA |
| Function selection |
three buttons, on / off button |
| Power supply |
4x1.5V (about 50 hours of work), automatic shutdown |
| Tester dimensions | 184x84x46mm |
| Terminator dimensions | 78 x 33 x 22mm |
| Packaging | cardboard box + soft case |
| Warranty | 12 months |
| Manufacturer | NOYAFA |
Calibration of the tester should be performed on a connector with a length of at least 10m.
The kit includes a tester, 8 numbered terminators, and a soft case.
The kit includes a tester, 8 numbered terminators, and a soft case.
#03807
Cable tester RJ-45, w/LCD and scan detector (NOYAFA NF-300)
The NF-300 tester can detect disturbances and errors occurring in the network of coaxial, telephone, UTP and FTP cabling, categories 5, 5E, 6, 7.
The tester can measure the length of the cable, which also allows finding the exact location of its damage. The possibility of calibration increases the accuracy of the measurement.
The set is equipped with a finder that allows tonal location of pairs of wires.
The tester can measure the length of the cable, which also allows finding the exact location of its damage. The possibility of calibration increases the accuracy of the measurement.
The set is equipped with a finder that allows tonal location of pairs of wires.
The batteries are not included.
#03808
Cable tester RJ-45, w/LCD, wire tracker, ping testing (NOYAFA NF-8601W)
Advanced cable tester thet performs PING, PoE, wiremap and length tests. The other benefits are large colour LCD display and data export to micro SD card.
The device is equipped with a clear, backlit LCD display.
The device is equipped with a clear, backlit LCD display.
| Tested cabling |
RJ45, RJ11, BNC |
|---|---|
| Functionality |
location of the damage site, cable length measurement, detection of short circuit; interruptions; reverse connections, measurement of the distance to damage, dynamic calibration of cable lenght measurement, temperature compensation, sound signaling, terminator identification |
| Wiring tests |
cable lenght, connection map, digital pair finder with generator, |
| LAN testing | ICMP ping |
| Cable length measurement | 10÷1000m |
| Setting the electric capacity of the tested cable | yes |
| Measurement of the distance to damage | yes |
| Ping test |
delay, lost packets |
| Ergonomics |
big and clear LCD display (320x240 pixels), automatic shutdown, long operating time, export of measurement data to a micro SD card |
| Power |
in-built battery, micro USB charging |
| Dimensions | 173x92x34 mm (main),183x58x35 mm (reciever) |
| Warranty | 12 months |
| Manufacturer | NOYAFA |
The kit includes:
- main unit,
- wire pair tracker,
- USB A (M) - micro USB (M) connector,
- crocodile clips,
- RJ45-RJ45 and RJ11-RJ11 connectors,
- terminators numbered from 1 to 8,
- case.
- main unit,
- wire pair tracker,
- USB A (M) - micro USB (M) connector,
- crocodile clips,
- RJ45-RJ45 and RJ11-RJ11 connectors,
- terminators numbered from 1 to 8,
- case.
#03866
Cable tester RJ-45, w/LCD, wire tracker, ping testing, TDR (NOYAFA NF-8601S)
The NF-8601S cable tester is an advanced device for complex network cabling tests.
The device is equipped with a colourful, backlit, 320z240 LCD display.
A noteworthy feature is the ability to perform a ping test with packet loss and latency measurement. In addition, the tester allows you to measure PoE voltage on each line and export the measurement data to an external micro SD memory card.
The NF-8601S tester measures the cable length and the distance from the fault using the TDR technology.
The device is equipped with a colourful, backlit, 320z240 LCD display.
A noteworthy feature is the ability to perform a ping test with packet loss and latency measurement. In addition, the tester allows you to measure PoE voltage on each line and export the measurement data to an external micro SD memory card.
The NF-8601S tester measures the cable length and the distance from the fault using the TDR technology.
| Tested cabling |
RJ45, RJ11, BNC |
|---|---|
| Functionality |
location of the damage site, cable length measurement, detection of short circuit; interruptions; reverse connections, measurement of the distance to damage, dynamic calibration of cable lenght measurement, temperature compensation, sound signaling, |
| Wiring tests |
cable lenght, connection map, digital pair finder with generator, |
| LAN testing |
ICMP ping, flash port |
| Cable length measurement | 10÷1500m |
| Setting the electric capacity of the tested cable | yes |
| Measurement of the distance to damage | yes |
| Ping test |
delay, lost packets |
| Ergonomics |
big and clear LCD display (320x240 pixels), automatic shutdown, long operating time, export of measurement data to a micro SD card |
| Power |
in-built battery, micro USB charging |
| Dimensions | 173x92x34 mm (main),183x58x35 mm (reciever) |
| Warranty | 12 months |
| Manufacturer | NOYAFA |
The kit includes:
- main unit,
- wire pair tracker,
- USB A (M) - micro USB (M) connector,
- crocodile clips,
- RJ45-RJ45 and RJ11-RJ11 connectors,
- terminator,
- case.
- main unit,
- wire pair tracker,
- USB A (M) - micro USB (M) connector,
- crocodile clips,
- RJ45-RJ45 and RJ11-RJ11 connectors,
- terminator,
- case.
#03051
Cable tester RJ-45, w/LCD, wire tracker, VFL (NOYAFA NF-858C)
Advanced cable tester thet performs PING, PoE, wiremap and length tests. The other benefits are large colour LCD display and data export to micro SD card.
The device is equipped with a clear, backlit LCD display.
The device is equipped with a clear, backlit LCD display.
| Tested cabling |
RJ45, RJ11, BNC, fibre optic (2.5mm SC;ST;FC ferrule) |
|---|---|
| Functionality |
location of the damage site, cable length measurement, detection of short circuit; interruptions; reverse connections, measurement of the distance to damage, dynamic calibration of cable lenght measurement, temperature compensation, sound signaling, terminator identification |
| Wiring tests |
cable lenght, connection map, digital pair finder with generator, light pen |
| Cable length measurement | 10÷2000m |
| Setting the electric capacity of the tested cable | yes |
| Measurement of the distance to damage | yes |
| Ergonomics |
big and clear LCD display, automatic shutdown, long operating time, measuring data memory |
| Power |
in-built 1000mAh battery, micro USB charging |
| Dimensions | 135x78x35 mm (main),107x30x24 mm (reciever) |
| Warranty | 12 months |
| Manufacturer | NOYAFA |
The kit includes:
- main unit,
- wire pair tracker,
- USB A (M) - micro USB (M) connector,
- crocodile clips,
- RJ45-RJ45 and RJ11-RJ11 connectors,
- terminators numbered from 1 to 4,
- case.
Do not connect the tester or terminators to networks with voltage> 20V.
- main unit,
- wire pair tracker,
- USB A (M) - micro USB (M) connector,
- crocodile clips,
- RJ45-RJ45 and RJ11-RJ11 connectors,
- terminators numbered from 1 to 4,
- case.
Do not connect the tester or terminators to networks with voltage> 20V.
#03872
Cable tester RJ-45, w/LCD. PoE and port flash (NOYAFA NF-8209)
The NF8209 cable tester is used to measure cable continuity. It enables the measurement of connection errors in UTP / STP twisted pairs. The device is equipped with an LCD display.
PoE detection and identify the standard (IEEE802.3at/af / non standard)
PoE detection and identify the standard (IEEE802.3at/af / non standard)
| Display | LCD 128x64 dot-matrix with backlight |
|---|---|
| Frequency of generator | 130kHz |
| Max. length of the tested cabling |
200m (length test), 600m (wiremap) |
| Length measuring accuracy | 1.6m |
| Max. current |
<130mA (emitter), <100mA (reciever) |
| Function selection | graphical menu |
| Power supply |
3x1.5V AAA (emitter), 9V (reciever) |
| PoE test range | 5÷60V |
| Packaging | cardboard box + soft case |
| Warranty | 12 months |
| Manufacturer | NOYAFA |
The kit includes:
- emitter,
- reciever,
- remote,
- connection wires,
- soft case
- emitter,
- reciever,
- remote,
- connection wires,
- soft case
.jpg?1615192015)
.jpg?1615192017)
.jpg?1615192019)
.jpg?1615192021)
#03884
Cable tester RJ-45, w/LCD. PoE and port flash (NOYAFA NF-8209S)
The NF8209S cable tester is used to measure cable continuity. It enables the measurement of connection errors in UTP / STP twisted pairs. The device is equipped with an LCD display.
PoE detection and identify the standard (IEEE802.3at/af / non standard)
PoE detection and identify the standard (IEEE802.3at/af / non standard)
| Display | LCD 128x64 dot-matrix with backlight |
|---|---|
| Frequency of analogue generator | 455kHz |
| Max. length of the tested cabling |
200m (length test), 600m (wiremap) |
| Length measuring accuracy | 1.6m |
| Max. current |
<130mA (emitter), <100mA (reciever) |
| Function selection | graphical menu |
| Power supply | 3.7V 1400mAh polymer lithium battery (both transmitter and reciever) |
| PoE test range | 5÷60V |
| Packaging | cardboard box + soft case |
| Warranty | 12 months |
| Manufacturer | NOYAFA |
The kit includes:
- emitter,
- reciever,
- connection wires,
- soft case
- emitter,
- reciever,
- connection wires,
- soft case
