MENU
#03873
Cable tester RJ-45, w/LCD, digital wire tracker, digital multimeter (WT36C)
- No Calibration is needed for general measurement
- Allow User Calibration for precise measurement
- Able to measure cable made of different material
- Only need to connect the cable at one side
- Measure up to 300 meters
- Able to measure LAN cable (both 4P4C & 8P8C), Phone wire and BNC cable
- Intelligent wiremap (Shorts and Split Pairs)
- Digital and Analogue signal selectable
- Auto power off
- With display backlight and flashlight
- Sensitivity adjustable
- With Built-in Multimeter Functions
Features:
#03030
Cable tester RJ-45, w/LCD, digital wire tracker, digital multimeter (WT36C)
- No Calibration is needed for general measurement
- Allow User Calibration for precise measurement
- Able to measure cable made of different material
- Only need to connect the cable at one side
- Measure up to 600 meters
- Able to measure LAN cable (both 4P4C & 8P8C), Phone wire and BNC cable
- Intelligent wiremap (Shorts and Split Pairs)
- Port Blink Test
- PoE voltage measurement
- Digital and Analogue signal selectable
- Auto power off
- With display backlight and flashlight
- Sensitivity adjustable
- With Built-in Multimeter Functions
Features:
#03883
Cable tester RJ-45 and Optical Power Meter, w/LCD, wire tracker, VFL (NOYAFA NF-8508)
Advanced cable tester that performs standard copper cable tests - wiremap, PoE test and length. Additionally fiber ports to perform optical power measurements and VFL. The other benefits are large colour LCD display
| Tested cabling |
RJ45, RJ11, fibre optic (2.5mm SC;ST;FC ferrule) |
|---|---|
| Functionality |
location of the damage site, cable length measurement, detection of short circuit; interruptions; reverse connections, measurement of the distance to damage, dynamic calibration of cable lenght measurement, temperature compensation, sound signaling |
| Wiring tests |
cable lenght, connection map, digital pair finder with generator, light pen |
| Fiber optic tests |
OPM -70..+10dBm 850/1300/1310/1490/1550/1625nm, VFL 10mW |
| Cable length measurement | 10÷200m |
| Measurement of the distance to damage | yes |
| PoE tests |
Standard/Non standard, voltage measurement, automatic detection, 60V max |
| Wire tracker |
digital, analogue 455kHz |
| Ergonomics |
big and clear LCD display, automatic shutdown, long operating time, measuring data memory |
| Power |
in-built 1500mAh battery, USB-C charging |
| Dimensions |
148x70x32 mm (main), 198x50x28 mm (reciever) |
| Warranty | 12 months |
| Manufacturer | NOYAFA |
The kit includes:
- main unit,
- wire pair tracker,
- USB A (M) - USB-C (M) connector,
- crocodile clips,
- RJ45-RJ45 and RJ11-RJ11 connectors,
- case.
Do not connect the tester or terminators to networks with voltage> 20V.
- main unit,
- wire pair tracker,
- USB A (M) - USB-C (M) connector,
- crocodile clips,
- RJ45-RJ45 and RJ11-RJ11 connectors,
- case.
Do not connect the tester or terminators to networks with voltage> 20V.
#03081
Cable tester RJ-45, w/LCD and 8 external terminators (NOYAFA NF-8108M)
The NF8108 cable tester is used to measure cable continuity. It enables the measurement of connection errors in UTP / STP twisted pairs. The device is equipped with an LCD display.
| Display | LCD (53x25mm) |
|---|---|
| Frequency of the audible signal | 225Hz (after connecting the terminator) |
| Max. length of the tested cabling | 300m |
| Length measuring accuracy | 95% |
| Max. current | <70mA |
| Function selection |
three buttons, on / off button |
| Power supply |
4x1.5V (about 50 hours of work), automatic shutdown |
| Tester dimensions | 184x84x46mm |
| Terminator dimensions | 78 x 33 x 22mm |
| Packaging | cardboard box + soft case |
| Warranty | 12 months |
| Manufacturer | NOYAFA |
Calibration of the tester should be performed on a connector with a length of at least 10m.
The kit includes a tester, 8 numbered terminators, and a soft case.
The kit includes a tester, 8 numbered terminators, and a soft case.
#03807
Cable tester RJ-45, w/LCD and scan detector (NOYAFA NF-300)
The NF-300 tester can detect disturbances and errors occurring in the network of coaxial, telephone, UTP and FTP cabling, categories 5, 5E, 6, 7.
The tester can measure the length of the cable, which also allows finding the exact location of its damage. The possibility of calibration increases the accuracy of the measurement.
The set is equipped with a finder that allows tonal location of pairs of wires.
The tester can measure the length of the cable, which also allows finding the exact location of its damage. The possibility of calibration increases the accuracy of the measurement.
The set is equipped with a finder that allows tonal location of pairs of wires.
The batteries are not included.
#03060
Cable tester RJ-45, w/LCD, digital wire tracker, WT26C
The WT26C digital wire tracker is an advanced device used for complex network cabling tests. It enables basic network cabling diagnostics- connection map, measurement of length and distance to fault.
Additionally, it is equipped with a digital and analog signal generator, enabling tracing the cable route and identifying pairs.
The device is equipped with a clear, backlit LCD display.
Additionally, it is equipped with a digital and analog signal generator, enabling tracing the cable route and identifying pairs.
The device is equipped with a clear, backlit LCD display.
| Tested cabling |
RJ45, RJ11, BNC |
|---|---|
| Functionality |
location of the damage site, cable length measurement, short circuit detection, interruptions, reverse connections, measurement of the distance to damage, temperature compensation, sound signaling |
| Wiring tests |
cable lenght, connection map, digital pair finder with generator |
| Cable length measurement | 300 m |
| Measurement of the distance to damage | yes |
| Ergonomics |
big and clear LCD display, automatic shutdown, long operating time |
| Power |
1800mAh battery, rechargable by micro USB |
| Dimensions |
173x87x37 mm (main), 187x35x29 mm (reciever) |
The kit includes:
- main unit,
- wire pair finder
- USB A (M) - micro USB (M) connector
- crocodile clips
- RJ45-RJ45 connector
- main unit,
- wire pair finder
- USB A (M) - micro USB (M) connector
- crocodile clips
- RJ45-RJ45 connector
#03090
Cable tester RJ-45, w/LCD, digital wire tracker, WT26G
The WT26G digital wire tracker is an advanced device used for complex network cabling tests. It enables basic network cabling diagnostics- connection map, measurement of length and distance to fault. It also enables simple PoE tests - polarity, voltage measurement.
Additionally, it is equipped with a digital and analog signal generator, enabling tracing the cable route and identifying pairs.
The device is equipped with a clear, backlit LCD display.
Additionally, it is equipped with a digital and analog signal generator, enabling tracing the cable route and identifying pairs.
The device is equipped with a clear, backlit LCD display.
| Tested cabling |
RJ45, RJ11, BNC |
|---|---|
| Functionality |
location of the damage site, cable length measurement, short circuit detection, interruptions, reverse connections, measurement of the distance to damage, temperature compensation, sound signaling, PoE tests |
| Wiring tests |
cable lenght, connection map, digital pair finder with generator, port blink test |
| Cable length measurement | 400 m |
| Measurement of the distance to damage | yes |
| Ergonomics |
big and clear LCD display, automatic shutdown, long operating time |
| Power |
1360mAh battery rechargable by micro USB (transmitter), 9V 6F22 (reciever) |
| Dimensions |
173x87x37 mm (main), 187x35x29 mm (reciever) |
The kit includes:
- main unit,
- wire pair finder
- USB A (M) - micro USB (M) connector
- crocodile clips
- RJ45-RJ45 connector
- main unit,
- wire pair finder
- USB A (M) - micro USB (M) connector
- crocodile clips
- RJ45-RJ45 connector
#03808
Cable tester RJ-45, w/LCD, wire tracker, ping testing (NOYAFA NF-8601W)
Advanced cable tester thet performs PING, PoE, wiremap and length tests. The other benefits are large colour LCD display and data export to micro SD card.
The device is equipped with a clear, backlit LCD display.
The device is equipped with a clear, backlit LCD display.
| Tested cabling |
RJ45, RJ11, BNC |
|---|---|
| Functionality |
location of the damage site, cable length measurement, detection of short circuit; interruptions; reverse connections, measurement of the distance to damage, dynamic calibration of cable lenght measurement, temperature compensation, sound signaling, terminator identification |
| Wiring tests |
cable lenght, connection map, digital pair finder with generator, |
| LAN testing | ICMP ping |
| Cable length measurement | 10÷1000m |
| Setting the electric capacity of the tested cable | yes |
| Measurement of the distance to damage | yes |
| Ping test |
delay, lost packets |
| Ergonomics |
big and clear LCD display (320x240 pixels), automatic shutdown, long operating time, export of measurement data to a micro SD card |
| Power |
in-built battery, micro USB charging |
| Dimensions | 173x92x34 mm (main),183x58x35 mm (reciever) |
| Warranty | 12 months |
| Manufacturer | NOYAFA |
The kit includes:
- main unit,
- wire pair tracker,
- USB A (M) - micro USB (M) connector,
- crocodile clips,
- RJ45-RJ45 and RJ11-RJ11 connectors,
- terminators numbered from 1 to 8,
- case.
- main unit,
- wire pair tracker,
- USB A (M) - micro USB (M) connector,
- crocodile clips,
- RJ45-RJ45 and RJ11-RJ11 connectors,
- terminators numbered from 1 to 8,
- case.
#03866
Cable tester RJ-45, w/LCD, wire tracker, ping testing, TDR (NOYAFA NF-8601S)
The NF-8601S cable tester is an advanced device for complex network cabling tests.
The device is equipped with a colourful, backlit, 320z240 LCD display.
A noteworthy feature is the ability to perform a ping test with packet loss and latency measurement. In addition, the tester allows you to measure PoE voltage on each line and export the measurement data to an external micro SD memory card.
The NF-8601S tester measures the cable length and the distance from the fault using the TDR technology.
The device is equipped with a colourful, backlit, 320z240 LCD display.
A noteworthy feature is the ability to perform a ping test with packet loss and latency measurement. In addition, the tester allows you to measure PoE voltage on each line and export the measurement data to an external micro SD memory card.
The NF-8601S tester measures the cable length and the distance from the fault using the TDR technology.
| Tested cabling |
RJ45, RJ11, BNC |
|---|---|
| Functionality |
location of the damage site, cable length measurement, detection of short circuit; interruptions; reverse connections, measurement of the distance to damage, dynamic calibration of cable lenght measurement, temperature compensation, sound signaling, |
| Wiring tests |
cable lenght, connection map, digital pair finder with generator, |
| LAN testing |
ICMP ping, flash port |
| Cable length measurement | 10÷1500m |
| Setting the electric capacity of the tested cable | yes |
| Measurement of the distance to damage | yes |
| Ping test |
delay, lost packets |
| Ergonomics |
big and clear LCD display (320x240 pixels), automatic shutdown, long operating time, export of measurement data to a micro SD card |
| Power |
in-built battery, micro USB charging |
| Dimensions | 173x92x34 mm (main),183x58x35 mm (reciever) |
| Warranty | 12 months |
| Manufacturer | NOYAFA |
The kit includes:
- main unit,
- wire pair tracker,
- USB A (M) - micro USB (M) connector,
- crocodile clips,
- RJ45-RJ45 and RJ11-RJ11 connectors,
- terminator,
- case.
- main unit,
- wire pair tracker,
- USB A (M) - micro USB (M) connector,
- crocodile clips,
- RJ45-RJ45 and RJ11-RJ11 connectors,
- terminator,
- case.
#03872
Cable tester RJ-45, w/LCD. PoE and port flash (NOYAFA NF-8209)
The NF8209 cable tester is used to measure cable continuity. It enables the measurement of connection errors in UTP / STP twisted pairs. The device is equipped with an LCD display.
PoE detection and identify the standard (IEEE802.3at/af / non standard)
PoE detection and identify the standard (IEEE802.3at/af / non standard)
| Display | LCD 128x64 dot-matrix with backlight |
|---|---|
| Frequency of generator | 130kHz |
| Max. length of the tested cabling |
200m (length test), 600m (wiremap) |
| Length measuring accuracy | 1.6m |
| Max. current |
<130mA (emitter), <100mA (reciever) |
| Function selection | graphical menu |
| Power supply |
3x1.5V AAA (emitter), 9V (reciever) |
| PoE test range | 5÷60V |
| Packaging | cardboard box + soft case |
| Warranty | 12 months |
| Manufacturer | NOYAFA |
The kit includes:
- emitter,
- reciever,
- remote,
- connection wires,
- soft case
- emitter,
- reciever,
- remote,
- connection wires,
- soft case
.jpg?1737028578)
.jpg?1737028577)
.jpg?1737028578)
.jpg?1739730048)
Page 2 of 3
|
