PoE plus: |
Ports | 1× 2,5G Ethernet Port |
---|---|
Bluetooth | yes |
Button | Reset |
Frequency range | 5 GHz and 2,4 GHz |
Signal Rate |
5 GHz Up to 4804 Mbps, 2.4 GHz Up to 1148 Mbps |
Wireless Functions |
Multiple SSIDs (Up to 16 SSIDs, 8 for each band), Enable/Disable Wireless Radio, Automatic Channel Assignment, Transmit Power Control (Adjust Transmit Power on dBm), QoS(WMM), Airtime Fairness, Beamforming, Band Steering, Load Balance, Rate Limit, Link Aggregation, Reboot Schedule, Wireless Schedule, Wireless Statistics based on SSID/AP/Client |
Wireless Security |
Captive Portal Authentication, Access Control, Wireless Mac Address Filtering, Wireless Isolation Between Clients, SSID to VLAN Mapping, Rogue AP Detection, 802.1X Support, 64/128/152-bit WEP / WPA / WPA2-Enterprise, WPA-PSK / WPA2-PSK |
MANAGEMENT | |
Omada App | Yes |
Centralized Management |
Omada Cloud-Based Controller, Omada Hardware Controller (OC300), Omada Hardware Controller (OC200), Omada Software Controller |
Cloud Access |
Yes (Through OC300, OC200, Omada Cloud-Based Controller, or Omada Software Controller) |
Email Alerts | Yes |
LED ON/OFF Control | Yes |
Management MAC Access Control | Yes |
SNMP | v1, v2c |
System Logging Local/Remote Syslog | Local/Remote Syslog |
SSH | Yes |
Web-based Management | HTTP/HTTPS |
L3 Management | Yes |
Multi-site Management | Yes |
Management VLAN | Yes |
Antenna |
Internal Omni, 2,4 GHz 4× 4 dBi, 5 GHz 4× 5 dBi |
Dimensions | 11.0 x 11.0 x 1.8 in (280 x 280 x 46.5 mm) |
Power |
802.3at PoE (Power adapter is not included), 12V DC |
Power Consumption | 20,43W |
Mounting | Ceiling /Wall Mounting (Kits included) |
Physical Security Lock | Yes |
Operating Temperature | 0°C~40°C (-32℉~104℉) |
Storage Temperature | -40℃~70℃ (-40℉~158℉) |
Operating Humidity | 10%~90% non-condensing |
Storage Humidity | 5%~90% non-condensing |
Package Contents |
EAP683 UR, Ceiling/Wall Mounting Kits, Installation Guide |
System Requirements |
Microsoft Windows XP, Vista, Windows 7, Windows 8, Windows 10, Windows 11, Linux |
Certificates |
CE, FCC, RoHS, IC |
Standards | IEEE 802.11ac/n/g/b/a |
---|---|
Ports | Gigabit Ethernet (RJ-45) Port *1 (ETH1 Support IEEE802.3at PoE) |
Frequency range | 2.4GHz and 5GHz |
Signal Rate |
5GHz Up to 1300Mbps, 2.4GHz Up to 450Mbps |
EIRP |
CE <20dBm(2,4GHz) <23dBm(5GHz), FCC <27dBm |
Wireless Functions |
Multiple SSIDs (Up to 16 SSIDs, 8 for each band), Enable/Disable Wireless Radio, Automatic Channel Assignment, Transmit Power Control (Adjust Transmit Power on dBm), QoS(WMM), Airtime Fairness, Beamforming, Band Steering, Load Balance, Rate Limit, Link Aggregation, Reboot Schedule, Wireless Schedule, Wireless Statistics based on SSID/AP/Client |
Wireless Security |
Captive Portal Authentication, Access Control, Wireless Mac Address Filtering, Wireless Isolation Between Clients, SSID to VLAN Mapping, Rogue AP Detection, 802.1X Support, 64/128/152-bit WEP / WPA / WPA2-Enterprise, WPA-PSK / WPA2-PSK |
EAP Controller Software | Yes |
Email Alerts | Yes |
LED ON/OFF Control | Yes |
Management MAC Access Control | Yes |
SNMP | v1, v2c |
System Logging Local/Remote Syslog | Local/Remote Syslog |
Telnet | Yes |
Web-based Management | HTTP/HTTPS |
L3 Management | Yes |
Multi-site Management | Yes |
Management VLAN | Yes |
Antenna |
Internal Omni 2,4GHz 3* 6dBi4, 5GHz 3*4dBi |
Dimensions | 7.1 x 7.1 x 1.9in. (180*180*47.5mm) |
Power | PoE or External 12VDC / 1.5A Power Supply |
Power Consumption | 12.7 W |
Mounting | Ceiling /Wall Mounting (Kits included) |
Physical Security Lock | Kensington Lock Slot |
Watch Dog | Yes |
Operating Temperature | 0°C~40°C (-32℉~104℉) |
Storage Temperature | -40℃~70℃ (-40℉~158℉) |
Operating Humidity | 10%~90% non-condensing |
Storage Humidity | 5%~90% non-condensing |
Package Contents |
AC1750 Wireless Dual Band Gigabit Access Point EAP245, Power Adapter, Mounting Kits, Installation Guide |
System Requirements |
Microsoft Windows XP, Vista, Windows 7, Windows 8, Windows10 |
Certificates |
CE, FCC, RoHS |
Warranty | 5 years |
Dual-band, 802.11ac Wave 2 access point designed to support high-density networks and critical system applications.
The Access Point AC HD (UAP AC HD) is a high-performance, indoor/outdoor, 802.11 ac WiFi access point that utilizes Wave 2 technology to reach an impressive 2+ Gbps aggregate throughput rate with its 5 GHz (4x4 MU-MIMO) and 2.4 GHz (4x24MIMO) bands. The UAP AC HD also has a focused antenna pattern to enhance your network's capacity and reduce interference from neighboring access points. This access point is powered with 802.3at PoE+ and is equipped with (2) GbE RJ45 ports and (1) USB port to support multiple connection types. The UAP AC HD can be set up in minutes and fully managed with the UniFi Network web application or mobile app.
Features:
Networking Interface (Mbps) | 2 x 10/100/1000 Ethernet Ports |
---|---|
Buttons | Reset |
Antennas |
2.4 GHz - (2) Dual-Port, Dual-Polarity Antennas, 3 dBi each (Supports 4x4 MIMO), 5 GHz - (2) Dual-Port, Dual-Polarity Antennas, 4 dBi each (Supports 4x4 MIMO) |
Wi-Fi Standards | 802.11 a/b/g/n/r/k/v/ac/ac-wave2 |
Power Method |
802.3at PoE+, UniFi Switch (PoE), 44 to 57VDC |
Maximum Power Consumption | 17W |
Maximum TX Power |
2.4 GHz - 6-25 dBm, 5 GHz - 6-25 dBm |
BSSID | 8 per Radio |
Dimensions | 220 x 220 x 48.1 mm |
Weight | 700 g (830 g with Mounting Kits) |
Power Save | Supported |
Wireless Security |
WEP, WPA-PSK, WPA-Enterprise (WPA/WPA2, TKIP/AES), 802.11w/PMF |
Certifications |
CE, FCC, IC |
Mounting | Wall/Ceiling (Kits Included) |
Operating Temperature | -10 ÷ 70° C |
Operating Humidity | 5 ÷ 95% Noncondensing |
Advanced Traffic Management | |
VLAN | 802.1Q |
Advanced QoS | Per-User Rate Limiting |
Guest traffic isolation | Supported |
WMM |
Voice, Video, Best Effort, and Background |
Concurrent Clients | 1000+ |
Supported Data Rates (Mbps) | |
802.11a | 6, 9, 12, 18, 24, 36, 48, 54 Mbps |
802.11n |
6.5 Mbps to 450 Mbps (MCS0 - MCS23, HT 20/40) |
802.11ac |
6.5 Mbps to 1.7 Gbps (MCS0 ‑ MCS9 NSS1/2/3/4, VHT 20/40/80), 58 Mbps to 1.7 Gbps (MCS0 ‑ MCS9 NSS1/2, VHT 160) |
802.11b | 1, 2, 5.5, 11 Mbps |
802.11g | 6, 9, 12, 18, 24, 36, 48, 54 Mbps |
Ports |
2*10/100Mbps Ethernet Port, 1*USB 2.0 Port, 1*Micro USB Port |
---|---|
Features: | |
Wireless Fuction |
L3 Management, Multi-SSID, Load Balance, Band Steering, Airtime Fariness, Beamforming, Rate Limit, Wireless Schedule, QoS |
Wireless Security |
Captive Portal Authentication, Access Control, Wireless Mac Address Filtering, Wireless Isolation Between Clients, SSID to VLAN Mapping, Rogue AP Detection |
AP Management |
Automatic Discovery, Unified Configuration, Reboot Schedule, Batch Firmware Upgrade, LED ON/OFF |
Authentication | Captive Portal |
Dimensions | 3.9×3.9×1.0in. (100×98×25mm) |
Operating temperature | 0°C ÷ 40°C |
Operating humidity |
10% ÷ 90%, non-condensing |
Power | 802.3af/at PoE or Micro USB(DC 5V/Minimum 1A) |
Certificates |
CE, FCC, RoHS |
Physical Ports | |
---|---|
10/100 Base-T(X) Ports in RJ45 Auto MDI/MDIX w/PoE (PSE) | 8 |
1000 COMBO with SFP | 2 |
RS-232 Serial Console Port | RS-232 in RJ45 connector with console cable (9600bps 8 N 1) |
Technology | |
Ethernet Standards |
IEEE 802.3 for 10BaseT, IEEE 802.3u for 100BaseT(X), IEEE 802.3x for Flow control, IEEE 802.1D for STP (Spanning Tree Protocol), IEEE 802.1p for COS (Class of Service), IEEE 802.1Q for VLAN Tagging, IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol), IEEE 802.1X for Authentication, IEEE 802.3ad for LACP (Link Aggregation Control Protocol), IEEE 802.1AB for LLDP (Link Layer Discovery Protocol), IEEE 802.3at PoE+ specification (up to 15.4 Watts per port for P.S.E) |
MAC Table | 8192 MAC addresses |
Priority Queues | 4 |
Processing | Store-and-Forward |
Switching latency | 7 µs |
Switching bandwidth | 5.6 Gbps |
Max. Number of Available VLANs | 4096 |
IGMP multicast groups | 1024 |
Port rate limiting | User Define |
Security Features |
Enable/disable ports, MAC based port security, Port based network access control (802.1x), VLAN (802.1q ) to segregate and secure network traffic, Supports Q-in-Q VLAN for performance & security to expand the VLAN space, Radius centralized password management, SNMPv3 encrypted authentication and access security |
Software Features |
STP/RSTP (IEEE 802.1D/w), Redundant Ring (O-Ring) with recovery time less than 10ms over 250 units, TOS/Diffserv supported, Quality of Service (802.1p) for real-time traffic, VLAN (802.1Q) with VLAN tagging and GVRP supported, IGMP Snooping for multicast filtering, Port configuration, Port status, Port statistics, Port monitoring, Port security, SNTP for synchronizing of clocks over network, Support PTP Client (Precision Time Protocol) clock synchronization, DHCP Server / Client support, Support ModbusTCP, Port Trunk support, MVR (Multicast VLAN Registration) support |
Network Redundancy |
STP, RSTP, MSTP, O-Ring, Open-Ring, O-RSTP |
DDM Function |
Voltage, Current, Temperature |
LED Indicators | |
Power /PoE Indicator |
Green - Ready LED x 3, Green - PoE LED x 8 |
Ring Master indicator | Green - Flashing to indicate system operated in O-Ring Master mode |
O-Ring indicator | Green - Indicate system operated in O-Ring mode |
Fault indicator | Amber - Indicate unexpected event occurred |
10/100TX RJ45 port indicator |
Green for port Link/Act, Amber for Duplex/Collision |
1000X / Fiber port indicator | Green for port Link/Act |
Fault contact | |
Relay | Relay output to carry capacity of 1A at 24VDC |
Power | |
Input power | Dual DC inputs. 24 ~ 36VDC on 6-pin terminal block |
Power consumption (typical) | 11.52W |
Overload current protection | present |
Physical Characteristic | |
Enclosure | IP-30 |
Dimension (W x D x H) | 74.3mm x 109.2mm x 153.6mm |
Weight | 1260g |
Environmental | |
Storage Temperature | -40÷85°C(-40÷185°F) |
Operating Temperature | -40÷70°C (-40÷158°F) |
Operating Humidity | 5%÷95% Non-condensing |
Regulatory approvals | |
EMI |
FCC Part 15, CISPR (EN55022) class A |
EMS |
EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11 |
Shock | IEC60068-2-27 |
Free Fall | IEC60068-2-32 |
Vibration | IEC60068-2-6 |
Safety | EN60950-1 |
Warranty | |
Warranty period | 5 years |
Physical Ports | |
---|---|
10/100 Base-T(X) Ports in RJ45 Auto MDI/MDIX w/PoE (PSE) | 8 |
1000 COMBO with SFP | 2 |
RS-232 Serial Console Port | RS-232 in RJ45 connector with console cable (9600bps 8 N 1) |
Technology | |
Ethernet Standards |
IEEE 802.3 for 10BaseT, IEEE 802.3u for 100BaseT(X), IEEE 802.3x for Flow control, IEEE 802.1D for STP (Spanning Tree Protocol), IEEE 802.1p for COS (Class of Service), IEEE 802.1Q for VLAN Tagging, IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol), IEEE 802.1X for Authentication, IEEE 802.3ad for LACP (Link Aggregation Control Protocol), IEEE 802.1AB for LLDP (Link Layer Discovery Protocol), IEEE 802.3at PoE+ specification (up to 30 Watts per port for P.S.E) |
MAC Table | 8192 MAC addresses |
Priority Queues | 4 |
Processing | Store-and-Forward |
Switching latency | 7 µs |
Switching bandwidth | 5.6 Gbps |
Max. Number of Available VLANs | 4096 |
IGMP multicast groups | 1024 |
Port rate limiting | User Define |
Security Features |
Enable/disable ports, MAC based port security, Port based network access control (802.1x), VLAN (802.1q ) to segregate and secure network traffic, Supports Q-in-Q VLAN for performance & security to expand the VLAN space, Radius centralized password management, SNMPv3 encrypted authentication and access security |
Software Features |
STP/RSTP (IEEE 802.1D/w), Redundant Ring (O-Ring) with recovery time less than 10ms over 250 units, TOS/Diffserv supported, Quality of Service (802.1p) for real-time traffic, VLAN (802.1Q) with VLAN tagging and GVRP supported, IGMP Snooping for multicast filtering, Port configuration, Port status, Port statistics, Port monitoring, Port security, SNTP for synchronizing of clocks over network, Support PTP Client (Precision Time Protocol) clock synchronization, DHCP Server / Client support, Support ModbusTCP, Port Trunk support, MVR (Multicast VLAN Registration) support |
Network Redundancy |
STP, RSTP, MSTP, O-Ring, Open-Ring, O-RSTP |
DDM Function |
Voltage, Current, Temperature |
LED Indicators | |
Power /PoE Indicator |
Green - Ready LED x 3, Green - PoE LED x 8 |
Ring Master indicator | Green - Flashing to indicate system operated in O-Ring Master mode |
O-Ring indicator | Green - Indicate system operated in O-Ring mode |
Fault indicator | Amber - Indicate unexpected event occurred |
10/100TX RJ45 port indicator |
Green for port Link/Act, Amber for Duplex/Collision |
1000X / Fiber port indicator | Green for port Link/Act |
Fault contact | |
Relay | Relay output to carry capacity of 1A at 24VDC |
Power | |
Input power | Dual DC inputs. 50÷57VDC on 6-pin terminal block |
Power consumption (typical) | 7.68W |
Overload current protection | present |
Physical Characteristic | |
Enclosure | IP-30 |
Dimension (W x D x H) | 74.3mm x 109.2mm x 153.6mm |
Weight | 1185g |
Environmental | |
Storage Temperature | -40÷85°C(-40÷185°F) |
Operating Temperature | -40÷70°C (-40÷158°F) |
Operating Humidity | 5%÷95% Non-condensing |
Regulatory approvals | |
EMI |
FCC Part 15, CISPR (EN55022) class A |
EMS |
EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11 |
Shock | IEC60068-2-27 |
Free Fall | IEC60068-2-32 |
Vibration | IEC60068-2-6 |
Safety | EN60950-1 |
Warranty | |
Warranty period | 5 years |
Physical Ports | |
---|---|
10/100/1000 Base-T(X) Auto MDI/MDIX ports | 8 (bypass function included by last 4 ports) |
RS-232 Serial Console Port |
RS-232 in 5-pin M12 connector with console cable. 115200bps, 8, N, 1 |
Technology | |
Ethernet Standards |
IEEE 802.3i for 10Base-T, IEEE 802.3u for 100Base-TX, IEEE 802.3ab for 1000Base-T, IEEE 802.3x for Flow control, IEEE 802.3ad for LACP (Link Aggregation Control Protocol ), IEEE 802.1p for COS (Class of Service), IEEE 802.1Q for VLAN Tagging, IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol), IEEE 802.1s for MSTP (Multiple Spanning Tree Protocol), IEEE 802.1x for Authentication, IEEE 802.1AB for LLDP (Link Layer Discovery Protocol) |
MAC Table | 8192 MAC addresses |
Flash Memory | 128Mbits |
DRAM Size | 1Gbits |
Jumbo frame | Up to 9.6K Bytes |
Priority Queues | 8 |
Processing | Store-and-Forward |
Switch Properties | |
Switching latency | 7 us |
Switching bandwidth | 24 Gbps |
Max. Number of Available VLANs | 4094 |
VLAN ID range | VID 1 to 4094 |
IGMP multicast groups | 128 for each VLAN |
Port rate limiting | User Define |
Security Featues |
Device Binding security feature, Enable/disable ports, MAC based port security, Port based network access control (802.1x), MAC-based authentication (802.1x), VLAN (802.1Q ) to segregate and secure network traffic, Radius centralized password management, SNMPv3 encrypted authentication and access security, Https / SSH enhance network security, Web and CLI authentication and authorization, IP source guard |
Software Features |
IEEE 802.1D Bridge, auto MAC address learning/aging and MAC address (static), MSTP (RSTP/STP compatible), Redundant Ring (O-Ring) with recovery time less than 30ms, TOS/Diffserv supported, Quality of Service (802.1p) for real-time traffic, VLAN (802.1Q) with VLAN tagging, Guest VLAN, IGMP v2/v3 Snooping, Application-based QoS management, DOS/DDOS auto prevention, Port configuration, status, statistics, monitoring, security, DHCP Server/Client/Relay |
SMTP Client, NTP server | |
Network Redundancy |
O-Ring, O-Chain, MSTP (RSTP/STP compatible) |
LED Indicators | |
Power Indicator (PWR) | Green - Power LED x 1 |
Ring Master Indicator (R.M.) | Green - Indicates that the system is operating in O-Ring Master mode |
O-Ring Indicator (Ring) |
Green - Indicates that the system operating in O-Ring mode, Green Blinking - Indicates that the Ring is broken. |
Fault Indicator (Fault) | Amber - Indicate unexpected event occurred |
10/100/1000Base-T(X) M12 P.S.E. Port Indicator |
Top Green LED for Ethernet speed indicator- Green LED for 1000Mbps, Amber for 100Mbps, Middle Green LED for PoE enable indicator, Bottom dual color LED for port Link/Act indicator |
10/100/1000Base-T(X) M12 Port Indicator |
Top dual color LED for Ethernet speed indicator- Green LED for 1000Mbps, Amber for 100Mbps, Bottom Green LED for Link/Act indicator |
Fault contact | |
Relay | Relay output to carry capacity of 3A at 30VDC on M12 connector (5-pin A-coding) |
Power | |
Redundant Input Power | 72/110 (50.4-137.5) VDC on 4-pin S-coded M12 connector |
PoE Output Power | 60W |
Power consumption (typical) | 20W (not include PoE output) |
Overload current protection | present |
Reverse Polarity Protection | present |
Physical Characteristic | |
Enclosure | IP-30 |
Dimension (W x D x H) | 438 x 250 x 44 mm |
Weight | 4550 g |
Environmental | |
Storage Temperature | -40÷85°C (-40÷185°F) |
Operating Temperature | -40÷75°C (-40÷167°F) |
Operating Humidity | 5%÷95% Non-condensing |
Regulatory approvals | |
EMC |
CE EMC (EN 55024, EN 55032), FCC Part 15 B, EN50155 (EN50121-3-2, EN55011) |
EMI |
EN 55032, CISPR32, EN 6100-3-2, EN 6100-3-3, FCC Part 15B class A |
EMS |
EN 55024 (IEC 61000-4-2 (ESD), IEC 61000-4-3 (RS), IEC 61000-4-4 (EFT), IEC 61000-4-5 (Surge), IEC 61000-4-6 (CS), IEC 61000-4-8 (PFMF), IEC 61000-4-11 (DIP)) |
Shock | IEC60068-2-27 |
Free Fall | IEC60068-2-31 |
Vibration | IEC60068-2-6 |
Safety | EN60950-1 |
Other | EN50155 |
MTBF | 298,128 hours |
Warranty | |
Warranty period | 5 years |
Page 11 of 11
|