This website uses cookies to operate basic website functions, personalise content, analyse traffic and for ad measurement purposes.
Our partners will collect data and use cookies for ad personalisation and measurement.
By continuing we assume your permission to deploy cookies, as detailed in our privacy policy. OK, Close

 
 
Communication for Industry
Thursday, 28 March
Search for product:
#08447
Industrial Media ConvertersORING NETWORKINGINJ-102GT-24V

Industrial Gigabit High Power Injector, 2x10/1000 RJ-45 PoE + 2x10/1000 RJ-45 (ORing INJ-102GT-24V)

The INJ-102GT PoE Injector is an advanced IEEE802.3at compliant device with Intelligent Detection, that provided 2-ports 10/100/1000Base-T(X) PoE outputs. The device does not turn on power until it detects a valid PoE signature from the PoE devices attached downstream on the Ethernet cable. This protection against damage to non-PoE compliant equipment which may be connected to the Ethernet cable. Because of this intelligent detection, only an IEEE 802.3at/802.3af compliant device can be powered with the INJ-102GT PoE Injector. Typically in gigabit networks the maximum allowable CAT5 cable length is about 100 meters, due to the limitation of the Ethernet standards. Because of its 50~57V insertion, the installer doesn’t need to worry about voltage drops caused by cable length. The INJ-102GT PoE Injector can function with any PoE P.D. equipment which is fully compliant with the IEEE 802.3at/802.3af PoE standards.
Physical Ports
10/100/1000Base-T(X) in RJ-45 Ethernet Port Input 2
10/100/1000Base-T(X) in RJ-45 Ethernet Port with P.S.E. Output 2
Operating Voltage
Input Voltage 24 ~ 57 VDC / 4-pin terminal block
Output Power 50V / 600mA,
30 Watts max. Per port
LED Indicators
Power indicator PWR / Ready 1 x LED,
Green On - Power is on and functioning Normally
PoE Indicators 2 x LED,
Blue On - PoE Device Link,
Blue Blinking - Detecting PoE Device,
Blue Off - None PoE Device Detected
Protection
Short Circuit Protection present
Over Load Protection present
High Voltage Protection present
Physical Characteristic
Enclosure IP-30
Dimension (W x D x H) 41mm x 70mm x 95mm
Weight 370g
Environmental
Storage Temperature -40÷80°C(-40÷176°F)
Operating Temperature -20÷70°C (-4÷158°F)
Operating Humidity 5%÷90% Non-condensing
Regulatory approvals
EMI FCC Part 15,
CISPR (EN55022) class A
EMS EN61000-4-2 (ESD),
EN61000-4-3 (RS),
EN61000-4-4 (EFT),
EN61000-4-5 (Surge),
EN61000-4-6 (CS),
EN61000-4-8,
EN61000-4-11
Shock IEC60068-2-27
Free Fall IEC60068-2-32
Vibration IEC60068-2-6
Safety EN60950-1
Warranty
Warranty period 2 years


Industrial Media Converters
expand groupexpand group [price]

FAST ETHERNET MEDIA CONVERTERS

 

GIGABIT ETHERNET MEDIA CONVERTERS

 

EN50155 COMPATIBLE CONVERTERS

 

IEC 61850-3 COMPATIBLE CONVERTERS

 

CARD TYPE CONVERTERS AND CHASSIS

 
#08437
827.00 USD

SERIAL MEDIA CONVERTERS

 
#08459
CallCall
#08460
CallCall

INJECTORS

 



All products' documentation is published in PDF (Portable Document Format), which requires Adobe Reader (ver. 5 and newer) software for viewing.
You can download this software from following website: Adobe Reader

Though we pay utmost attention, we cannot guarantee, that published materials are free of errors and diversities.
These lapses cannot be a basis for any legal claims.
All images placed on Atel Electronic's web sites may slightly vary from real look of current selling products.
If you have any doubts regarding information on this website please contact us (phone +48-77-4556076, e-mail cust@atel.com.pl).