VUTLAN Products |
|
Server Rooms Monitoring Systems |
|
VUTLAN provides IP monitoring and power management solutions for enterprises and small businesses. Monitoring Systems and IP Power Distribution ranges are designed for large data centres, server rooms, web hosting facilities, 19 inch telecommunication racks etc. Environmental monitoring in the server rooms, on the telecommunication nodes, in data centers et cetera is of great importance to many if not to all companies. What are the indoor temperature and humidity, what happens to the air conditioning or fans, whether the line voltage has a huge impact on the reliability of the equipment and the service life of servers, switches, and routers. If you have the only rack with a couple of ups and two three servers, you need to install a small monitoring unit with 5-6 sensors, enter your notifications and logic and may be to connect an inexpensive USB cam. Built-in web server and video server allows you to view logs and events at your facility, the logic when properly installed will allow the monitoring system to accept most decisions, for example, to shut down servers at high temperature or at failure of air conditioning or fans, or in case of fire, etc. and to warn user with any notification or SMS (if GSM modem is installed). If you have a set of facilities and requires a scalable, easy-to-install solution for monitoring a distributed network, then you must either apply extension units and sensors that allow to gather information from wide area, or when there are absolutely great distances between nodes and objects, it is possible to use SNMP applications that allow to collect information from multiple remote sites and can be stored in any database, if necessary, to use this information by appropriate authorities. It is also important to use monitoring systems with easy scalability and a wide range of sensors,with longlife-warranty period at a reasonable prices. All this ensures the equipment from VUTLAN, the most modern manufacturer of IP monitoring systems! Manufacturer's website: http://www.vutlan.com |
| Technical specifications | |
|---|---|
| Measured humidity range | 10-95% RH |
| Accuracy | 5% RH |
| PIR sensor disrance | 30mm |
| Number of dry contacts | 2 |
| Number of CAN ports | 2 |
| Maximum distance from the appliance | 300m |
| Features | |
| Installation |
There are 4 mounting holes on the bottom of the case for fastening. Fasten the unit, connect CAN inputs to the input of the previous CAN unit or of the monitoring unit. |
| Connection | Sensor's jack RJ-12 is connected to CAN input of any system unit or to a CAN output of another sensor using RJ-12 patch cable. Determination of sensor's type and connection occur automatically. |
| Supply includes |
Unit, shielded patch cable RJ-12, 2 screws and 2 nuts M6, sticker, dry contacts connector.. |
| Net weight | 0.2 kg |
| Dimensions (LHW) | 89×27×36mm |
| HARDWARE FEATURES: | |
|---|---|
| Interface | USB format(Complies with USB 2.0 |
| CAMERA: | |
| Image Sensor | 1/4" Color CMOS H62 |
| Resolution | 1.0 Megapixel (640 x 480) |
| Minimum Illumination | 0.01 Lux @ F1.2 |
| VIDEO/IMAGE: | |
| Video Compression | MJPEG |
| Frame Rate & Resolutions |
Max. 20 fps at 640x480 (VGA), Max. 20 fps at 320x240 (QVGA) |
| Video Streaming | Controllable Frame Rate |
| OTHERS: | |
| Cable lenght | 5m |
| Operating Temperature | 0°C∼ 40°C (Humidity 0% RH∼ 80% RH) |
| Weight | 550g |
| Product code | VT-WLC15 |
|---|---|
| Lenght | 15m |
| Max operational lenght | 225m |
| Manufacturer | Vutlan |
| Number of analog ports | 8 |
|---|---|
| Number of CAN ports | 2 |
| Maximum bus length | 225 meters |
| Maximum analog sensor cable length |
50-150 meters, depending on the sensor type |
| Installation | In the lower part of the casing there are Ø 5 mm holes for mounting the module, |
| at a distance of 50 mm and 89 mm from the center. The cable is connected to the connector on the side wall. | |
| Connection | Can be connected via RJ-12 cable to the CAN input of the control unit or another CAN sensor. The module is automatically detected on the first connection. |
| Set includes |
module, CAN cable RJ-12 (2m), 3.5x16mm screws |
| Net weight | 0.6 kg |
| Dimensions (LHW) | 110×68×40 mm |
| Number of analog ports |
8, RJ11 6P4C CAN ports |
|---|---|
| Number of CAN ports | 2 |
| Maximum bus length | 225 meters |
| Maximum analog sensor cable length |
50-150 meters, depending on the sensor type |
| Installation | DIN mounting 7mm (0.28in) / 15mm (0.59in) |
| Connection | Can be connected via RJ-12 cable to the CAN input of the control unit or another CAN sensor. The module is automatically detected on the first connection. |
| Set includes |
module, CAN cable RJ-11 (2m), 12VDC power adapter |
| Dimensions (LHW) | 129×56×28,6 mm |
| Number of dry contacts | 32 - 64 |
|---|---|
| Contact outputs | 3.5mm |
| Max contact distance | 500m |
| Number of CAN ports |
2 (1 input, 1 output) |
| Mounting |
The unit includes two 19" mounting angles for mounting inside the rack. Alternatively, there are 2 mounting holes on the bottom of the case for fastening on the wall. Fasten the unit, connect CAN inputs to the input of the previous CAN unit or of the monitoring unit. The red LED lights up. Match the bus terminators of the CAN units. Switch terminator TR in ON position on the monitoring unit and on the last CAN unit, TR on intermediate CAN units are in Off (1,2) position. Maximum 8 CAN units, sensors and/or devices can be on one CAN bus. |
| Inventory |
Unit, 3-pair shielded patch cable RJ-12 2 m length, screw 3.5 x 16 mm, fastener 2-sided, rubber feet, 19" mounting angles. |
| Net weight | 0.5 kg |
| Dimensions (LHW) | 215×40×40mm |
| Product code | VT-WLC25 |
|---|---|
| Lenght | 25m |
| Max operational lenght | 225m |
| Manufacturer | Vutlan |
| Product code | VT-WLC50 |
|---|---|
| Lenght | 50m |
| Max operational lenght | 225m |
| Manufacturer | Vutlan |
Page 6 of 6
|