MENUPRICE REDUCTIONS
- Communication for industry
-
- » SLIM TYPE POWER SUPPLIES 230V AC#06674
Power supply 10W 24VDC, mini, DIN TS35 (Mean Well MDR-10-24)
DIN rail Mean Well MDR series meets the highest standards and criteria, so that it can be used to work in the industrial automation systems, machine control, power, lighting and a wide range of devices.
The power supply is cooled by free air flow, making it a highly fault-free - a very important feature when power supply is working continuously. Operating temperature for this model ranges from -20 to +70 degrees Celsius.
Moreover, the PSU has an overload protection 105-160% of the nominal value.Output DC Voltage 24V Rated current 0.42A Current Range 0÷0.42A Rated Power 10W Ripple & noise (max.) 150mVp-p Voltage tolerance ±2.0% Line regulation ±1.0% Load regulation ±2.0% Setup & rise time 500ms & 30ms/230VAC at full load,
1000ms & 30ms/115VAC at full loadHold up time (typ.) 120ms/230VAC at full load,
25ms/115VAC at full loadInput Voltage range 85÷264VAC,
120÷370VDCFrequency range 47÷63Hz Efficiency (typ.) 84% AC current (typ.) 0.33A/115VAC,
0.21A/230VACInrush current (typ.) 35A/115VAC cold start,
70A/230VAC cold startLeakage current <1mA/240VAC Protection Overload above 105% rated output power,
protection type - Hiccup mode - recovers automatically after fault condition is removedOvervoltage 27.6÷32.4V,
protection type - shut down o/p voltage & re-power on to recoverFunction DC OK active signal 18÷27V/20mA Environment Working temperature -20°C ÷ 70°C Working humidity 20÷90% RH non-condensing Storage temperature -40°C ÷ 85°C Storage Humidity 10÷95% RH Temperature coefficient ±0.03%/°C (0÷50°C) Vibration (component) 10÷500Hz,
2G 10min./1cycle,
60min. each along X Y Z axesVibration (mounting) compliance to IEC60068-2-6 Safety & EMC Safety standards UL508,
TUV EN60950-1,
NEC class 2 / LPSWithstand voltage I/P-O/P 3kVAC,
I/P-FG 1.5kVAC,
O/P-FG 0.5kVACIsolation resistance I/P-O/P 100MΩ/500VDC,
I/P-FG 100MΩ/500VDC,
O/P-FG 100MΩ/500VDCEMI conduction & radiation EN55011,
EN55022 (CISPR22),
EN61204-3 Class BHarmonic current EN61000-3-2,
EN61000-3-3EMS immunity EN61000-4-2/3/4/5/6/8/11,
ENV50204,
EN55024,
EN61000-6-1,
EN61204-3,
light industry level criteria AOthers MTBF min. 584000h MIL-HDBK-217F (25°C) Dimension (W x H x D) 22.5mm x 90mm x 100mm Weight 0.17kg Warranty 3 years
#06676Power supply 40W 24VDC, mini, DIN TS35 (Mean Well MDR-40-24)
DIN rail Mean Well MDR series meets the highest standards and criteria, so that it can be used to work in the industrial automation systems, machine control, power, lighting and a wide range of devices.
The power supply is cooled by free air flow, making it a highly fault-free - a very important feature when power supply is working continuously. Operating temperature for this model ranges from -20 to +70 degrees Celsius.
Moreover, the PSU has an overload protection 105-160% of the nominal value.Output DC Voltage 24V Rated current 1.7A Current Range 0÷1.7A Rated Power 40.8W Ripple & noise (max.) 150mVp-p Voltage adjustment range 24÷30V Voltage tolerance ±1.0% Line regulation ±1.0% Load regulation ±1.0% Setup & rise time 500ms & 30ms/230VAC at full load,
500ms & 30ms/115VAC at full loadHold up time (typ.) 50ms/230VAC at full load,
20ms/115VAC at full loadInput Voltage range 85÷264VAC,
120÷370VDCFrequency range 47÷63Hz Efficiency (typ.) 88% AC current (typ.) 1.1A/115VAC,
0.7A/230VACInrush current (typ.) 30A/115VAC cold start,
60A/230VAC cold startLeakage current <1mA/240VAC Protection Overload 105%÷150% rated output power,
protection type - constant current limiting - recovers automatically after fault condition is removedOvervoltage 31.2÷36V,
protection type - shut down o/p voltage & re-power on to recoverFunction DC OK signal relay contact rating (max.) 30V/1A resistive Environment Working temperature -20°C ÷ 70°C Working humidity 20÷90% RH non-condensing Storage temperature -40°C ÷ 85°C Storage Humidity 10÷95% RH Temperature coefficient ±0.03%/°C (0÷50°C) Vibration (component) 10÷500Hz,
2G 10min./1cycle,
60min. each along X Y Z axesVibration (mounting) compliance to IEC60068-2-6 Safety & EMC Safety standards UL508,
UL60950-1,
TUV EN60950-1,
NEC class 2 / LPSWithstand voltage I/P-O/P 3kVAC,
I/P-FG 1.5kVAC,
O/P-FG 0.5kVACIsolation resistance I/P-O/P 100MΩ/500VDC 25°C 70%RH,
I/P-FG 100MΩ/500VDC 25°C 70%RH,
O/P-FG 100MΩ/500VDC 25°C 70%RHEMI conduction & radiation EN55011,
EN55022 (CISPR22),
EN61204-3 Class BHarmonic current EN61000-3-2,
EN61000-3-3EMS immunity EN61000-4-2/3/4/5/6/8/11,
ENV50204,
EN55024,
EN61000-6-2,
EN61204-3,
heavy industry level criteria AOthers MTBF min. 301700h MIL-HDBK-217F (25°C) Dimension (W x H x D) 40mm x 90mm x 100mm Weight 0.3kg
#06677Power supply 60W 24VDC, mini, DIN TS35 (Mean Well MDR-60-24)
DIN rail Mean Well MDR series meets the highest standards and criteria, so that it can be used to work in the industrial automation systems, machine control, power, lighting and a wide range of devices.
The power supply is cooled by free air flow, making it a highly fault-free - a very important feature when power supply is working continuously. Operating temperature for this model ranges from -20 to +70 degrees Celsius.
Moreover, the PSU has an overload protection 105-160% of the nominal value.Output DC Voltage 24V Rated current 2.5A Current Range 0÷2.5A Rated Power 60W Ripple & noise (max.) 150mVp-p Voltage adjustment range 24÷30V Voltage tolerance ±1.0% Line regulation ±1.0% Load regulation ±1.0% Setup & rise time 500ms & 30ms/230VAC at full load,
500ms & 30ms/115VAC at full loadHold up time (typ.) 50ms/230VAC at full load,
20ms/115VAC at full loadInput Voltage range 85÷264VAC,
120÷370VDCFrequency range 47÷63Hz Efficiency (typ.) 88% AC current (typ.) 1.8A/115VAC,
1A/230VACInrush current (typ.) 30A/115VAC cold start,
60A/230VAC cold startLeakage current <1mA/240VAC Protection Overload 105%÷150% rated output power,
protection type - constant current limiting - recovers automatically after fault condition is removedOvervoltage 31.2÷36V,
protection type - shut down o/p voltage & re-power on to recoverFunction DC OK signal relay contact rating (max.) 30V/1A resistive Environment Working temperature -20°C ÷ 70°C Working humidity 20÷90% RH non-condensing Storage temperature -40°C ÷ 85°C Storage Humidity 10÷95% RH Temperature coefficient ±0.03%/°C (0÷50°C) Vibration (component) 10÷500Hz,
2G 10min./1cycle,
60min. each along X Y Z axesVibration (mounting) compliance to IEC60068-2-6 Safety & EMC Safety standards UL508,
UL60950-1,
TUV EN60950-1,
NEC class 2 / LPSWithstand voltage I/P-O/P 3kVAC,
I/P-FG 1.5kVAC,
O/P-FG 0.5kVACIsolation resistance I/P-O/P 100MΩ/500VDC 25°C 70%RH,
I/P-FG 100MΩ/500VDC 25°C 70%RH,
O/P-FG 100MΩ/500VDC 25°C 70%RHEMI conduction & radiation EN55011,
EN55022 (CISPR22),
EN61204-3 Class BHarmonic current EN61000-3-2,
EN61000-3-3EMS immunity EN61000-4-2/3/4/5/6/8/11,
ENV50204,
EN55024,
EN61000-6-2,
EN61204-3,
heavy industry level criteria AOthers MTBF min. 299200h MIL-HDBK-217F (25°C) Dimension (W x H x D) 40mm x 90mm x 100mm Weight 0.33kg
- » STANDARD POWER SUPPLIES 230V AC#06910
Power supply 15W 24VDC, DIN TS35 (Mean Well HDR-15-24)
Output DC Voltage 24V Rated current 0.63A Rated Power 15W Ripple & noise (max.) 150mVp-p Voltage adjustment range 21.6÷29.0V Voltage tolerance ±1.0% Line regulation ±1.0% Load regulation ±1.0% Input Voltage range 85÷264VAC,
120÷370VDCEfficiency (typ.) 86% Protection Overload 105%÷160% rated output power,
protection type - constant current limiting - recovers automaticallyOvervoltage 115%÷150%,
protection type - shut down ,
clamp by zener diodeEnvironment Working temperature -30°C ÷ 70°C Vibration (component) 10÷500Hz,
2G 10min./1cycle,
60min. each along X Y Z axesSafety & EMC Safety standards UL62368-1,
UL508,
TUV EN61558-2-16,
IEC62368-1,
EAC Tp TC 040,
BSMI CNS14336-1 approvedWithstand voltage I/P-O/P 4kVAC EMC Standards EN55032 class B,
EN61000-3-2,33,
EN61000-6-2,
EN61000-4-2,3,4,5,6,8,11,
EN61204-3Others MTBF min. 441500h MIL-HDBK-217F (25°C) Dimension (W x H x D) 17.5mm x 90mm x 5.5mm
#06911Power supply 30W 24VDC, DIN TS35 (Mean Well HDR-30-24)
Output DC Voltage 24V Rated current 1.5A Current Range 0÷1.5A Rated Power 30W Ripple & noise (max.) 150mVp-p Voltage adjustment range 21.6÷29.0V Voltage tolerance ±1.0% Line regulation ±1.0% Load regulation ±1.0% Input Voltage range 85÷264VAC,
120÷370VDCEfficiency (typ.) 89% Protection Overload 105%÷160% rated output power,
protection type - constant current limiting - recovers automaticallyOvervoltage 115%÷150%,
protection type - shut down & re-power on to recoverEnvironment Working temperature -30°C ÷ 70°C Vibration (component) 10÷500Hz,
2G 10min./1cycle,
60min. each along X Y Z axesSafety & EMC Safety standards UL62368-1,
UL508,
TUV EN61558-2-16,
IEC62368-1,
EAC Tp TC 040,
BSMI CNS14336-1 approvedWithstand voltage I/P-O/P 4kVAC EMC Standards EN55032 class B,
EN61000-3-2,33,
EN61000-6-2,
EN61000-4-2,3,4,5,6,8,11,
EN61204-3Others MTBF min. 441500h MIL-HDBK-217F (25°C) Dimension (W x H x D) 35mm x 90mm x 5.5mm
#06912Power supply 60W 24VDC, DIN TS35 (Mean Well HDR-60-24)
Output DC Voltage 24V Rated current 2.5A Current Range 0÷2.5A Rated Power 60W Ripple & noise (max.) 150mVp-p Voltage adjustment range 21.6÷29.0V Voltage tolerance ±1.0% Line regulation ±1.0% Load regulation ±1.0% Input Voltage range 85÷264VAC,
120÷370VDCEfficiency (typ.) 60% Protection Overload 105%÷160% rated output power,
protection type - constant current limiting - recovers automaticallyOvervoltage 115%÷150%,
protection type - shut down & re-power on to recoverEnvironment Working temperature -30°C ÷ 70°C Vibration (component) 10÷500Hz,
2G 10min./1cycle,
60min. each along X Y Z axesSafety & EMC Safety standards UL62368-1,
UL508,
TUV EN61558-2-16,
IEC62368-1,
EAC Tp TC 040,
BSMI CNS14336-1 approvedWithstand voltage I/P-O/P 4kVAC EMC Standards EN55032 class B,
EN61000-3-2,33,
EN61000-6-2,
EN61000-4-2,3,4,5,6,8,11,
EN61204-3Others MTBF min. 441500h MIL-HDBK-217F (25°C) Dimension (W x H x D) 52.5mm x 90mm x 5.5mm
#06669Power supply 60W 48VDC, DIN TS35 (Mean Well HDR-60-48)
Output DC Voltage 48V Rated current 1.25A Current Range 0÷1.25A Rated Power 60W Ripple & noise (max.) 240mVp-p Voltage adjustment range 43.2÷55.2V Voltage tolerance ±1.0% Line regulation ±1.0% Load regulation ±1.0% Input Voltage range 85÷264VAC,
120÷370VDCEfficiency (typ.) 91% Protection Overload 105%÷160% rated output power,
protection type - constant current limiting - recovers automaticallyOvervoltage 115%÷150%,
protection type - shut down & re-power on to recoverEnvironment Working temperature -30°C ÷ 70°C Vibration (component) 10÷500Hz,
2G 10min./1cycle,
60min. each along X Y Z axesSafety & EMC Safety standards UL62368-1,
UL508,
TUV EN61558-2-16,
IEC62368-1,
EAC Tp TC 040,
BSMI CNS14336-1 approvedWithstand voltage I/P-O/P 4kVAC EMC Standards EN55032 class B,
EN61000-3-2,33,
EN61000-6-2,
EN61000-4-2,3,4,5,6,8,11,
EN61204-3Others MTBF min. 441500h MIL-HDBK-217F (25°C) Dimension (W x H x D) 52.5mm x 90mm x 5.5mm
#06694Power supply 100W 24VDC, DIN TS35 (Mean Well HDR-100-24)
Output DC Voltage 24V Rated current 3,83A Current Range 0÷3,83A Rated Power 100W Ripple & noise (max.) 150mVp-p Voltage adjustment range 21.6÷29.0V Voltage tolerance ±1.0% Line regulation ±1.0% Load regulation ±1.0% Input Voltage range 85÷264VAC,
120÷370VDCEfficiency (typ.) 90% Protection Overload 102%÷110% rated output power,
protection type - constant current limiting - recovers automaticallyEnvironment Working temperature -30°C ÷ 70°C Vibration (component) 10÷500Hz,
2G 10min./1cycle,
60min. each along X Y Z axesSafety & EMC Safety standards UL60950-1,
IEC60950-1 approved,
UL62368-1,
UL508,
TUV EN61558-2-16,
IEC62368-1,
EAC Tp TC 040,
BSMI CNS14336-1 approvedWithstand voltage I/P-O/P 3kVAC EMC Standards EN55032 class B,
EN61000-3-2,33,
EN61000-6-2,
EN61000-4-2,3,4,5,6,8,11Others Dimension (W x H x D) 70mm x 90mm x 54.5mm
#06670Power supply 100W 48VDC, DIN TS35 (Mean Well HDR-100-48)
Output DC Voltage 48V Rated current 1.92A Current Range 0÷1.92A Rated Power 100W Ripple & noise (max.) 240mVp-p Voltage adjustment range 48.0÷48.7V Voltage tolerance ±1.0% Line regulation ±1.0% Load regulation ±1.0% Input Voltage range 85÷264VAC,
120÷370VDCEfficiency (typ.) 90% Protection Overload 102%÷110% rated output power,
protection type - constant current limiting - recovers automaticallyEnvironment Working temperature -30°C ÷ 70°C Vibration (component) 10÷500Hz,
2G 10min./1cycle,
60min. each along X Y Z axesSafety & EMC Safety standards UL60950-1,
IEC60950-1 approved,
UL62368-1,
UL508,
TUV EN61558-2-16,
IEC62368-1,
EAC Tp TC 040,
BSMI CNS14336-1 approvedWithstand voltage I/P-O/P 3kVAC EMC Standards EN55032 class B,
EN61000-3-2,33,
EN61000-6-2,
EN61000-4-2,3,4,5,6,8,11Others Dimension (W x H x D) 70mm x 90mm x 54.5mm
#08396Power supply 120W 24VDC, DIN TS35, P.F.C. (Mean Well SDR-120-24)
DIN rail Mean Well SDR series meets the highest standards and criteria, so that it can be used to work in the industrial automation systems, machine control, power, lighting and a wide range of devices.
PSU device is enclosed in a metal housing that is resistant to low and high temperatures. Power supplies of this group can withstand a load of 150% of the rated power for 3 seconds.
The power supply is cooled by the free flow of air, making it a highly fault-free - this is a very important feature when power supply is working continuously.Output DC Voltage 24V Rated current 5A Current Range 0÷5A Rated Power 120W Ripple & noise (max.) 100mVp-p Voltage adjustment range 24÷28V Voltage tolerance ±1.0% Line regulation ±0.5% Load regulation ±1.0% Setup & rise time 1500ms & 60ms/230VAC at full load,
3000ms & 40ms/115VAC at full loadHold up time (typ.) 20ms/230VAC at full load,
20ms/115VAC at full loadInput Voltage range 88÷264VAC,
124÷370VDCFrequency range 47÷63Hz Power factor (typ.) 0.93/230VAC at full load,
0.96/115VAC at full loadEfficiency (typ.) 91% AC current (typ.) 1.4A/115VAC,
0.7A/230VACInrush current (typ.) 35A/115VAC cold start,
70A/230VAC cold startLeakage current <1mA/240VAC Protection Overload 110%÷150% rated output power,
protection type - constant current limiting - recovers automatically after fault condition is removedOvervoltage 29÷33V,
protection type - shut down o/p voltage & re-power on to recoverOver temperature 95°C ±5°C (TSW1) detect on heatsink of power transistor,
protection type - shut down o/p voltage & re-power on to recoverEnvironment Working temperature -25°C ÷ 70°C Working humidity 20÷95% RH non-condensing Storage temperature -40°C ÷ 85°C Storage Humidity 10÷95% RH Temperature coefficient ±0.03%/°C (0÷50°C) Vibration (component) 10÷500Hz,
2G 10min./1cycle,
60min. each along X Y Z axesVibration (mounting) compliance to IEC60068-2-6 Safety & EMC Safety standards UL508,
UL60950-1,
TUV EN60950-1Withstand voltage I/P-O/P 3kVAC,
I/P-FG 1.5kVAC,
O/P-FG 0.5kVACIsolation resistance I/P-O/P 100MΩ/500VDC,
I/P-FG 100MΩ/500VDC,
O/P-FG 100MΩ/500VDCEMI conduction & radiation EN55011,
EN55022 (CISPR22),
EN61204-3 Class BHarmonic current EN61000-3-2,
EN61000-3-3EMS immunity EN61000-4-2/3/4/5/6/8/11,
ENV50204,
EN55024,
EN61000-6-2 (EN50082-2),
heavy industry level criteria AOthers MTBF min. 289900h MIL-HDBK-217F (25°C) Dimension (W x H x D) 40mm x 125,2mm x 113,5mm Weight 0,67kg
-
Page 1 of 2
|
