This website uses cookies to operate basic website functions, personalise content, analyse traffic and for ad measurement purposes.
Our partners will collect data and use cookies for ad personalisation and measurement.
By continuing we assume your permission to deploy cookies, as detailed in our privacy policy. OK, Close

 
 
High-Technologies Supplier
Wednesday, 5 August
[Log In]
Items tagged as

SFP slot:
  • Communication for industry
    • Industrial Switches
      • » PoE SWITCHES UNMANAGED
          #07972

          Unmanaged switch, 4x 10/1000 RJ-45 PoE + 2x 1000 SFP (ORing IGPS-1042GP-24V)

          IGPS-1042GP-24V is an slim type unmanaged PoE Ethernet switch with P.S.E. function. IGPS-1042GP-24V supports Power over Ethernet, a system to transmit electrical power, along with data, to remote devices over standard twisted-pair cable in an Ethernet network. IGPS-1042GP-24V has 4x10/100/1000Base-T(X) P.S.E. (Power Sourcing Equipment) ports, and 2x100/1000Base-X SFP port. The SFP port optical network speed can be set by changing the settings of the DIP-Switch below. IGPS-1042GP-24V supports wide range 50~57VDC power inputs and generates 50VDC P.S.E. power output per port. P.S.E. is a device (switch or hub for instance) that will provide power in a PoE setup. The wide operating temperature range from -40oC to 70oC can satisfy most of operating environment. Therefore, the switch is one of the most reliable choices for PoE Ethernet application.
          Physical Ports
          10/100/1000 Base-T(X) Ports in RJ45 with P.S.E. Auto MDI/MDIX 4
          100/1000Base-X SFP Ports 2
          Technology
          Ethernet Standards IEEE 802.3 for 10BaseT,
          IEEE 802.3u for 100BaseT(X) and 100BaseFX,,
          IEEE 802.3z for 1000Base-X,
          IEEE 802.3x for Flow control,
          IEEE 802.3at PoE specification (up to 30 Watts per port for P.S.E.)
          MAC Table 1024 MAC addresses
          Processing Store-and-Forward
          LED Indicators
          Power indicator Green - Power LED x 2
          Fault indicator Amber - Indicate PWR1 or PWR2 failure
          10/100/1000TX RJ45 port Indicator and PoE indicator (P1 ~ P4) Green for port Link/Act.,
          Green for PoE power injected
          1000X SFP port Indicator (P5 ~ P6) Green for port Link/Act
          Fault contact
          Relay Relay output to carry capacity of 1A at 24VDC
          Power
          Input power Dual DC inputs. 24-36 VDC on 6-pin terminal block
          Power consumption (typical) 6.5W
          Overload current protection present
          Reverse polarity protection not present
          Physical Characteristic
          Enclosure IP-30
          Dimension (W x D x H) 41mm x 94.9m x 144.3mm
          Weight 650g
          Environmental
          Storage Temperature -40÷85°C (-40÷185°F)
          Operating Temperature -10÷60°C (-40÷158°F)
          Operating Humidity 5%÷95% Non-condensing
          Regulatory approvals
          EMI FCC Part 15,
          CISPR (EN55022) class A
          EMS EN61000-4-2 (ESD),
          EN61000-4-3 (RS),
          EN61000-4-4 (EFT),
          EN61000-4-5 (Surge),
          EN61000-4-6 (CS),
          EN61000-4-8,
          EN61000-4-11
          Shock IEC60068-2-27
          Free Fall IEC60068-2-32
          Vibration IEC60068-2-6
          Safety EN60950
          Warranty
          Warranty period 5 years
          Unmanaged switch, 4x 10/1000 RJ-45 PoE + 2x 1000 SFP (ORing IGPS-1042GP-24V)
          for special orders only
          Net Price: 454.00 USD
          product card»
          #07971

          Unmanaged switch, 4x 10/1000 RJ-45 PoE + 2x 1000 SFP , slim housing (ORing IGPS-1042GPA)

          IGPS-1042GPA is an slim type unmanaged PoE Ethernet switch with P.S.E. function. IGPS-1042GPA supports Power over Ethernet, a system to transmit electrical power, along with data, to remote devices over standard twisted-pair cable in an Ethernet network. IGPS-1042GPA has 4x10/100/1000Base-T(X) P.S.E. (Power Sourcing Equipment) ports, and 2x100/1000Base-X SFP port. The SFP port optical network speed can be set by changing the settings of the DIP-Switch below. IGPS-1042GPA supports wide range 50~57VDC power inputs and generates 50VDC P.S.E. power output per port. P.S.E. is a device (switch or hub for instance) that will provide power in a PoE setup. The wide operating temperature range from -40oC to 70oC can satisfy most of operating environment. Therefore, the switch is one of the most reliable choices for PoE Ethernet application.
          Physical Ports
          10/100/1000 Base-T(X) Ports in RJ45 with P.S.E. Auto MDI/MDIX 4
          100/1000Base-X SFP Ports 2
          Technology
          Ethernet Standards IEEE 802.3 for 10BaseT,
          IEEE 802.3u for 100BaseT(X) and 100BaseFX,,
          IEEE 802.3z for 1000Base-X,
          IEEE 802.3x for Flow control,
          IEEE 802.3at PoE specification (up to 30 Watts per port for P.S.E.)
          MAC Table 1024 MAC addresses
          Processing Store-and-Forward
          LED Indicators
          Power indicator Green - Power LED x 2
          Fault indicator Amber - Indicate PWR1 or PWR2 failure
          10/100/1000TX RJ45 port Indicator and PoE indicator (P1 ~ P4) Green for port Link/Act.,
          Green for PoE power injected
          1000X SFP port Indicator (P5 ~ P6) Green for port Link/Act
          Fault contact
          Relay Relay output to carry capacity of 1A at 24VDC
          Power
          Input power Dual DC inputs. 50~57VDC on 6-pin terminal block
          Power consumption (typical) 6.3W
          Overload current protection present
          Reverse polarity protection not present
          Physical Characteristic
          Enclosure IP-30
          Dimension (W x D x H) 26.1mm x 94.9m x 144.3mm
          Weight 410g
          Environmental
          Storage Temperature -40÷85°C (-40÷185°F)
          Operating Temperature -40÷70°C (-40÷185°F)
          Operating Humidity 5%÷95% Non-condensing
          Regulatory approvals
          EMI FCC Part 15,
          CISPR (EN55022) class A
          EMS EN61000-4-2 (ESD),
          EN61000-4-3 (RS),
          EN61000-4-4 (EFT),
          EN61000-4-5 (Surge),
          EN61000-4-6 (CS),
          EN61000-4-8,
          EN61000-4-11
          Shock IEC60068-2-27
          Free Fall IEC60068-2-32
          Vibration IEC60068-2-6
          Safety EN60950
          Warranty
          Warranty period 5 years
          Unmanaged switch, 4x 10/1000 RJ-45 PoE + 2x 1000 SFP , slim housing (ORing IGPS-1042GPA)
          for special orders only
          Net Price: 405.00 USD
          product card»
          #07645

          Unmanaged switch, 4x 10/1000 RJ-45 PoE, 1x 10/1000 RJ-45, 1x 1000 SFP socket, slim housing (ORing IGPS-1411GTPA)

          IGPS-1411GTPA is an unmanaged PoE Ethernet switch with P.S.E. function. IGPS-1411GTPA support Power over Ethernet, a system to transmit electrical power, along with data, to remote devices over standard twisted-pair cable in an Ethernet network. IGPS-1411GTPA has 4X10/100/1000Base-T(X) P.S.E. (Power Sourcing Equipment) ports. P.S.E. is a device (switch or hub for instance) that will provide power in a PoE setup. The wide operating temperature range from -40oC to 70oC can satisfy most of operating environment. Therefore, the switch is one of the most reliable choices for PoE Ethernet application.
          Physical Ports
          10/100/1000 Base-T(X) Ports in RJ45 Auto MDI/MDIX with PoE (PSE) 4
          10/100/1000 Base-T(X) Ports in RJ45 Auto MDI/MDIX 1
          100/1000Base-X SFP port 1
          Technology
          Ethernet Standards IEEE 802.3 for 10BaseT,
          IEEE 802.3u for 100BaseT(X),
          IEEE 802.3ab for 1000Base-T,
          IEEE 802.3x for Flow control,
          802.3at PoE specyfication
          MAC Table 1024 MAC addresses
          Processing Store-and-Forward
          LED Indicators
          Power indicator Green - Power LED x 2
          Fault indicator Amber - Indicate PWR1 or PWR2 failure
          10/100/1000Base-T(X) RJ45 port indicator and PoE indicator (P1÷P4) Green for port Link/Act.,
          Green for power injected
          10/100/1000Base-T(X) RJ45 port indicator (P5) Green for port Link/Act.,
          Amber for 100Mbps indicator
          100/1000Base-X port indicator Green for port Link/Act.
          SFP Speed DIP-Switch
          DIP-Switch 1/2 DIP-Switch 1 (ON) and DIP-Switch 2 (ON) - SFP speed setting to 100Mbps DIP-Switch 1 (OFF) and DIP-Switch 2 (OFF) - SFP speed setting to 1000Mbps
          DIP-Switch
          DIP-Switch 1 Power-1 failed warning - (ON) enable,
          (OFF) disable
          DIP-Switch 2 Power-2 failed warning - (ON) enable,
          (OFF) disable
          Fault contact
          Relay Relay output to carry capacity of 1A at 24VDC
          Power
          Input power Dual DC inputs. 50~57VDC on 6-pin terminal block.
          Power consumption (typical) 6.2W
          Overload current protection present
          Reverse polarity protection not present
          Physical Characteristic
          Enclosure IP-30
          Dimension (W x D x H) 26.1(W) x 94.9(D) x 144.3(H) mm
          Weight 407 g
          Environmental
          Storage Temperature -40÷85°C (-40÷185°F)
          Operating Temperature -40÷70°C (-40÷158°F)
          Operating Humidity 5%÷95% Non-condensing
          Regulatory approvals
          EMI FCC Part 15,
          CISPR (EN55022) class A
          EMS EN61000-4-2 (ESD),
          EN61000-4-3 (RS),
          EN61000-4-4 (EFT),
          EN61000-4-5 (Surge),
          EN61000-4-6 (CS),
          EN61000-4-8,
          EN61000-4-11
          Shock IEC60068-2-27
          Free Fall IEC60068-2-32
          Vibration IEC60068-2-6
          Safety EN60950
          Warranty
          Warranty period 5 years
          Unmanaged switch, 4x 10/1000 RJ-45 PoE, 1x 10/1000 RJ-45, 1x 1000 SFP socket, slim housing (ORing IGPS-1411GTPA)
          for special orders only
          Net Price: 376.00 USD
          product card»
          #08433

          Unmanaged switch, 4x 10/1000 RJ-45 PoE, 1x 10/1000 RJ-45, 1x 1000 SFP socket, slim housing (ORing IGPS-1411GTP-24V)

          IGPS-1411GTP-24V is an unmanaged PoE Ethernet switch with P.S.E. function. IGPS-1411GTP-24V supports Power over Ethernet, a system to transmit electrical power, along with data, to remote devices over standard twisted-pair cable in an Ethernet network. IGPS-1411GTP-24V has 4x10/100/1000Base-T(X) P.S.E. (Power Sourcing Equipment) ports, 1 additional Gigabit port, and 1x100/1000Base-X SFP port. The SFP port optical network speed can be set by changing the settings of the DIP-Switch below. IGPS-1411GTP-24V supports wide range 12~36VDC power inputs and generates 50VDC P.S.E. power output per port. P.S.E. is a device (switch or hub for instance) that will provide power in a PoE setup. The wide operating temperature range from -40oC to 60oC can satisfy most of operating environment. Therefore, the switch is one of the most reliable choices for PoE Ethernet application.
          Physical Ports
          10/100/1000 Base-T(X) Ports in RJ45 Auto MDI/MDIX with PoE+ (P.S.E.) 4
          10/100/1000 Base-T(X) Ports in RJ45 Auto MDI/MDIX 1
          100/1000Base-X SFP port 1
          Technology
          Ethernet Standards IEEE 802.3 for 10BaseT,
          IEEE 802.3u for 100BaseT(X),
          IEEE 802.3ab for 1000Base-T,
          IEEE 802.3x for Flow control,
          802.3at PoE specyfication
          MAC Table 1024 MAC addresses
          Processing Store-and-Forward
          LED Indicators
          Power indicator Green - Power LED x 2
          Fault indicator Amber - Indicate PWR1 or PWR2 failure
          10/100/1000Base-T(X) RJ45 port indicator and PoE Indicator (P1÷P4) Green for port Link/Act.,
          Green for power injected
          10/100/1000Base-T(X) RJ45 port Indicator (P5) Green for port Link/Act.,
          Amber for 100Mbps Indicator
          100/1000Base-X SFP port indicator Green for port Link/Act.
          SFP Speed DIP-Switch
          DIP-Switch 1/2 DIP-Switch 1 (ON) and DIP-Switch 2 (ON) - SFP speed setting to 100Mbps DIP-Switch 1 (OFF) and DIP-Switch 2 (OFF) - SFP speed setting to 1000Mbps
          DIP-Switch
          DIP-Switch 1 Power-1 failed warning - (ON) enable,
          (OFF) disable
          DIP-Switch 2 Power-2 failed warning - (ON) enable,
          (OFF) disable
          Fault contact
          Relay Relay output to carry capacity of 1A at 24VDC
          Power
          Input power Dual DC inputs. 12~36VDC on 6-pin terminal block
          Power consumption (typical) 6.5W
          Overload current protection present
          Reverse polarity protection not present
          Physical Characteristic
          Enclosure IP-30
          Dimension (W x D x H) 41 (W) x 94.9 (D) x 144.3(H) mm
          Weight 580 g
          Environmental
          Storage Temperature -40÷85°C (-40÷185°F)
          Operating Temperature -40÷60°C (-40÷140°F)
          Operating Humidity 5%÷95% Non-condensing
          Regulatory approvals
          EMI FCC Part 15,
          CISPR (EN55022) class A
          EMS EN61000-4-2 (ESD),
          EN61000-4-3 (RS),
          EN61000-4-4 (EFT),
          EN61000-4-5 (Surge),
          EN61000-4-6 (CS),
          EN61000-4-8,
          EN61000-4-11
          Shock IEC60068-2-27
          Free Fall IEC60068-2-32
          Vibration IEC60068-2-6
          Safety EN60950-1
          Warranty
          Warranty period 5 years
          Unmanaged switch, 4x 10/1000 RJ-45 PoE, 1x 10/1000 RJ-45, 1x 1000 SFP socket, slim housing (ORing IGPS-1411GTP-24V)
          Net Price: 432.00 USD
          product card»
          #06517

          Unmanaged switch, 8x 10/1000 RJ-45 PoE + 2x 1000 SFP, slim housing (ORing IGPS-1082GP)

          IGPS-1082GP series is full Gigabit unmanaged PoE Ethernet switches with 8x10/100/1000Base-T(X) P.S.E. ports and 2x100/1000Base-X SFP ports. IGPS-1082GP series also support Power over Ethernet, a system to transmit electrical power up to 30 watts, along with data, to remote devices over standard twisted-pair cable in an Ethernet network. Each IGPS-1082GP series switch has 8x10/100/1000Base-T(X) P.S.E. (Power Sourcing Equipment) ports. P.S.E. is a device (switch or hub for instance) that will provide power in a PoE connection. And support wide operating temperature from -40 oC to 75 oC. Therefore, the switch is one of the most reliable choices for rolling stock and highly-unmanaged PoE Ethernet application.
          Physical Ports
          10/100/1000 Base-T(X) Ports in RJ45 with P.S.E. Auto MDI/MDIX 8
          100/1000Base-X SFP Ports 2
          Technology
          Ethernet Standards IEEE 802.3 for 10BaseT,
          IEEE 802.3u for 100BaseT(X) and 100BaseFX,,
          IEEE 802.3z for 1000Base-X,
          IEEE 802.3x for Flow control,
          IEEE 802.3af/at PoE specification (up to 30 Watts per port for P.S.E.)
          MAC Table 8k MAC addresses
          Processing Store-and-Forward
          Switch Properties Switching latency less than 7us,
          Switching bandwidth 20Gbps
          Jumbo frame Up to 9.6K Bytes
          Packet buffer 4Mbit
          LED Indicators
          Power indicator Green - Power LED x 3
          Fault indicator Amber - Indicate power failed even warning
          10/100/1000TX RJ45 port Indicator and PoE indicator (P1 ~ P4) Green for port Link/Act.,
          Green for PoE power injected
          1000X SFP port Indicator Green for port Link/Act
          DIP Switch
          DIP-Switch 1 Power-1 failed warning (ON) enable,
          (OFF) disable
          DIP-Switch 2 Power-2 failed warning (ON) enable,
          (OFF) disable
          DIP-Switch 3 DIP switch 3 and 4 (ON) SFP speed setting to 100Mbps
          DIP-Switch 4 DIP switch 3 and 4 (OFF) SFP speed setting to 1000Mbps(default)
          Fault contact
          Relay Relay output to carry capacity of 1A at 24VDC
          Power
          Input power Dual DC inputs. 50-57 VDC on 6-pin terminal block
          Power consumption (typical) 11W
          PoE Power budget 180W
          Overload current protection present
          Reverse polarity protection present
          Physical Characteristic
          Enclosure IP-30
          Dimension (W x D x H) 54.3(W) x 108.3(D) x 145.1(H) mm (2.13x4.26x5.71 inches.)
          Weight 889g
          Environmental
          Storage Temperature -40÷85°C (-40÷185°F)
          Operating Temperature -40÷75°C (-40÷167°F)
          Operating Humidity 5%÷95% Non-condensing
          Regulatory approvals
          EMC EN55032,
          EN55024(CE EMC),
          FCC Part 15B,
          EN61000-3-2,
          EN61000-3-3
          EMI CISPR 32,
          EN55032,
          FCC Part 15B class A
          EMS IEC 61000-4-2 (ESD),
          IEC 61000-4-3 (RS),
          IEC 61000-4-4 (EFT),
          IEC 61000-4-5 (Surge),
          IEC 61000-4-6 (CS),
          IEC 61000-4-8 (PFMF),
          IEC 61000-4-11 (DIP)
          Shock IEC60068-2-27
          Free Fall IEC60068-2-32
          Vibration IEC60068-2-6
          Safety EN60950-1
          Warranty
          Warranty period 5 years
          Unmanaged switch, 8x 10/1000 RJ-45 PoE + 2x 1000 SFP, slim housing (ORing IGPS-1082GP)
          for special orders only
          Net Price: 627.00 USD
          product card»
          #06518

          Unmanaged switch, 8x 10/1000 RJ-45 PoE + 2x 1000 SFP, slim housing (ORing IGPS-1082GP-24V)

          IGPS-1082GP series is full Gigabit unmanaged PoE Ethernet switches with 8x10/100/1000Base-T(X) P.S.E. ports and 2x100/1000Base-X SFP ports. IGPS-1082GP series also support Power over Ethernet, a system to transmit electrical power up to 30 watts, along with data, to remote devices over standard twisted-pair cable in an Ethernet network. Each IGPS-1082GP series switch has 8x10/100/1000Base-T(X) P.S.E. (Power Sourcing Equipment) ports. P.S.E. is a device (switch or hub for instance) that will provide power in a PoE connection. And support wide operating temperature from -40 oC to 75 oC. Therefore, the switch is one of the most reliable choices for rolling stock and highly-unmanaged PoE Ethernet application.
          Physical Ports
          10/100/1000 Base-T(X) Ports in RJ45 with P.S.E. Auto MDI/MDIX 8
          100/1000Base-X SFP Ports 2
          Technology
          Ethernet Standards IEEE 802.3 for 10BaseT,
          IEEE 802.3u for 100BaseT(X) and 100BaseFX,,
          IEEE 802.3z for 1000Base-X,
          IEEE 802.3x for Flow control,
          IEEE 802.3af/at PoE specification (up to 30 Watts per port for P.S.E.)
          MAC Table 8k MAC addresses
          Processing Store-and-Forward
          Switch Properties Switching latency less than 7us,
          Switching bandwidth 20Gbps
          Jumbo frame Up to 9.6K Bytes
          Packet buffer 4Mbit
          LED Indicators
          Power indicator Green - Power LED x 3
          Fault indicator Amber - Indicate power failed even warning
          10/100/1000TX RJ45 port Indicator and PoE indicator (P1 ~ P4) Green for port Link/Act.,
          Green for PoE power injected
          1000X SFP port Indicator Green for port Link/Act
          DIP Switch
          DIP-Switch 1 Power-1 failed warning (ON) enable,
          (OFF) disable
          DIP-Switch 2 Power-2 failed warning (ON) enable,
          (OFF) disable
          DIP-Switch 3 DIP switch 3 and 4 (ON) SFP speed setting to 100Mbps
          DIP-Switch 4 DIP switch 3 and 4 (OFF) SFP speed setting to 1000Mbps(default)
          Fault contact
          Relay Relay output to carry capacity of 1A at 24VDC
          Power
          Input power Dual DC inputs. 12-57 VDC on 6-pin terminal block
          Power consumption (typical) 11W
          PoE Power budget 60W at 12~24VDC,
          120W at 24~57VDC
          Overload current protection present
          Reverse polarity protection present
          Physical Characteristic
          Enclosure IP-30
          Dimension (W x D x H) 54.3(W) x 108.3(D) x 145.1(H) mm (2.13x4.26x5.71 inches.)
          Weight 916g
          Environmental
          Storage Temperature -40÷85°C (-40÷185°F)
          Operating Temperature -40÷75°C (-40÷167°F)
          Operating Humidity 5%÷95% Non-condensing
          Regulatory approvals
          EMC EN55032,
          EN55024(CE EMC),
          FCC Part 15B,
          EN61000-3-2,
          EN61000-3-3
          EMI CISPR 32,
          EN55032,
          FCC Part 15B class A
          EMS IEC 61000-4-2 (ESD),
          IEC 61000-4-3 (RS),
          IEC 61000-4-4 (EFT),
          IEC 61000-4-5 (Surge),
          IEC 61000-4-6 (CS),
          IEC 61000-4-8 (PFMF),
          IEC 61000-4-11 (DIP)
          Shock IEC60068-2-27
          Free Fall IEC60068-2-32
          Vibration IEC60068-2-6
          Safety EN60950-1
          Warranty
          Warranty period 5 years
          Unmanaged switch, 8x 10/1000 RJ-45 PoE + 2x 1000 SFP, slim housing (ORing IGPS-1082GP-24V)
          for special orders only
          Net Price: 697.00 USD
          product card»
          #07672

          Unmanaged industrial switch, 8x 100/1000 RJ-45 PoE, 2x 1000 SFP (Wave Industrial WO-IS-M2GF8GT-8POE)

          Physical Ports
          100/1000 Base-T(X) Ports in RJ45 Auto MDI/MDIX 8 w/PoE
          1000Base-FX SFP ports 2
          Technology
          Ethernet Standards IEEE 802.3u for 100Base-TX and 100Base-FX,
          IEEE 802.3ab for 1000Base-T,
          IEEE 802.3z for 1000Base-X
          LED Indicators power,
          RJ45 ports,
          SFP slots,
          PoE (8)
          Power Dual DC inputs. 48÷57VDC on 4-pin terminal block
          Power consumption (typical) 12W
          Physical Characteristic
          Enclosure IP-40
          Dimension (W x H x D) 48mm x 142mm x 116mm
          Weight 600g
          Environmental
          Storage Temperature -40÷85°C
          Operating Temperature -40÷85°C
          Operating Humidity 5%÷95% Non-condensing
          Regulatory approvals
          EMI FCC Part 15,
          CISPR (EN55022) class A,
          EN50155 (EN50121-3-2,
          EN55011,
          EN50121-4)
          EMS EN61000-4-2 (ESD),
          EN61000-4-3 (RS),
          EN61000-4-4 (EFT),
          EN61000-4-5 (Surge),
          EN61000-4-6 (CS),
          EN61000-4-8,
          EN61000-4-11
          Shock IEC60068-2-27
          Free Fall IEC60068-2-32
          Vibration IEC60068-2-6
          Safety EN60950-1
          Warranty
          Warranty period 5 years
          Unmanaged industrial switch, 8x 100/1000 RJ-45 PoE, 2x 1000 SFP (Wave Industrial WO-IS-M2GF8GT-8POE)
          Net Price: 121.00 USD
          product card»
      • » FAST ETHERNET / UNMANAGED SWITCHES
          #06584

          Unmanaged switch, 4x 10/100 RJ-45, 1x SFP, slim housing (ORing IES-C1041P)

          Physical Ports
          10/100 Base-T(X) Ports in RJ45 Auto MDI/MDIX 4
          100Base-FX with SFP port 1
          Technology
          Ethernet Standards IEEE 802.3 for 10BaseT,
          IEEE 802.3u for 100BaseT(X),
          IEEE 802.3x for Flow control
          MAC Table 1K
          Packet buffer Size 448Kbits
          Processing Store-and-Forward
          LED Indicators
          Power indicator Green - Power LED x 2
          Fault indicator Yellow - Indicate PWR1 or PWR2 failure
          10/100TX RJ45 port indicator Green for port Link/Act,
          Yellow for Duplex/Collision
          Fault contact
          Relay Relay output to carry capacity of 1A at 24VDC
          Power
          Input power 9.6~60VDC/24VAC (18~30 VAC) on 2-pin terminal block.
          Power consumption (typical) 4W
          Overload current protection present
          Reverse polarity protection present
          Physical Characteristic
          Enclosure IP-40
          Dimension (W x D x H) 26mm × 103mm × 64mm
          Environmental
          Storage Temperature -40÷85°C
          Operating Temperature -10÷60°C
          Operating Humidity 5%÷95% Non-condensing
          Regulatory approvals
          EMI FCC Part 15,
          CISPR (EN55022) class A
          EMS EN61000-4-2 (ESD),
          EN61000-4-3 (RS),
          EN61000-4-4 (EFT),
          EN61000-4-5 (Surge),
          EN61000-4-6 (CS),
          EN61000-4-8,
          EN61000-4-11
          Shock IEC60068-2-27
          Free Fall IEC60068-2-32
          Vibration IEC60068-2-6
          Safety EN60950
          Warranty
          Warranty period 5 years
          Unmanaged switch, 4x 10/100 RJ-45, 1x SFP, slim housing (ORing IES-C1041P)
          for special orders only
          Net Price: 88.10 USD
          product card»
          #06585

          Unmanaged switch, 6x 10/100 RJ-45, 2x SFP, slim housing (ORing IES-C1062P)

          Physical Ports
          10/100 Base-T(X) Ports in RJ45 Auto MDI/MDIX 6
          100Base-FX with SFP port 2
          Technology
          Ethernet Standards IEEE 802.3 for 10BaseT,
          IEEE 802.3u for 100BaseT(X),
          IEEE 802.3x for Flow control
          MAC Table 1K
          Packet buffer Size 448Kbits
          Processing Store-and-Forward
          LED Indicators
          Power indicator Green - Power LED x 2
          Fault indicator Yellow - Indicate PWR1 or PWR2 failure
          10/100TX RJ45 port indicator Green for port Link/Act,
          Yellow for Duplex/Collision
          Fault contact
          Relay Relay output to carry capacity of 1A at 24VDC
          Power
          Input power 9.6~60VDC/24VAC (18~30 VAC) on 2-pin terminal block.
          Power consumption (typical) 5W
          Overload current protection present
          Reverse polarity protection present
          Physical Characteristic
          Enclosure IP-40
          Dimension (W x D x H) 43.5 × 103 × 64mm
          Environmental
          Storage Temperature -40÷85°C
          Operating Temperature -10÷60°C
          Operating Humidity 5%÷95% Non-condensing
          Regulatory approvals
          EMI FCC Part 15,
          CISPR (EN55022) class A
          EMS EN61000-4-2 (ESD),
          EN61000-4-3 (RS),
          EN61000-4-4 (EFT),
          EN61000-4-5 (Surge),
          EN61000-4-6 (CS),
          EN61000-4-8,
          EN61000-4-11
          Shock IEC60068-2-27
          Free Fall IEC60068-2-32
          Vibration IEC60068-2-6
          Safety EN60950
          Warranty
          Warranty period 5 years
          Unmanaged switch, 6x 10/100 RJ-45, 2x SFP, slim housing (ORing IES-C1062P)
          Net Price: 106.00 USD
          product card»
          #07914

          Unmanaged switch, 14x 10/100 RJ-45 + 2x 100 SFP (ORing IES-1142)

          IES-1142P is a din-rail unmanaged Ethernet switch with 14x10/100Base-T(X) and 2x100Base-FX in SFP ports. IES-1142P supports redundant power inputs. The wide operating temperature range from -40°C to 70°C can satisfy most of operating environments.
          Physical Ports
          10/100 Base-T(X) Ports in RJ45 Auto MDI/MDIX 14
          100 Mbps SFP Ports 2
          Technology
          Ethernet Standards IEEE 802.3 for 10BaseT,
          IEEE 802.3u for 100BaseT(X),
          IEEE 802.3x for Flow control
          MAC Table 4096 MAC addresses
          Processing Store-and-Forward
          Software Features Port configuration,
          Port status,
          Port statistics,
          Port monitoring,
          Port security
          LED Indicators
          Power indicator Green - Power LED x 3
          10/100TX RJ45 port indicator Green for port Link/Act,
          Amber for speed indicator – Amber for 100Mbps,
          off-light for 10Mbps
          Fiber port indicator Green for port Link/Act
          Power
          Input power Dual DC inputs. 12÷48VDC on 6-pin terminal block
          Power consumption (typical) 10W
          Overload current protection present
          Reverse polarity protection present on terminal block
          Physical Characteristic
          Enclosure IP-30
          Dimension (W x D x H) 74mm x 140mm x 170mm
          Weight 1120g
          Environmental
          Storage Temperature -40÷85°C(-40÷185°F)
          Operating Temperature -40÷70°C (-40÷158°F)
          Operating Humidity 5%÷95% Non-condensing
          Regulatory approvals
          EMI FCC Part 15,
          CISPR (EN55022) class A
          EMS EN61000-4-2 (ESD),
          EN61000-4-3 (RS),
          EN61000-4-4 (EFT),
          EN61000-4-5 (Surge),
          EN61000-4-6 (CS),
          EN61000-4-8,
          EN61000-4-11
          Shock IEC60068-2-27
          Free Fall IEC60068-2-32
          Vibration IEC60068-2-6
          Safety EN60950
          Warranty
          Warranty period 5 years
          Unmanaged switch, 14x 10/100 RJ-45 + 2x 100 SFP (ORing IES-1142)
          for special orders only
          Net Price: 500.00 USD
          product card»


top

Page 13 of 18
$ €