![]() FLUKE NETWORKS Products |
Fluke Networks was established in 1992 as FLUKE's branch. In year 2000 company separated from Fluke as independent branch. Since then, company's income has been still growing, securing their leader position in hi-class telecommunication testing devices. Fluke Networks offers specialized instruments for structural cabling testing, wide area networks analysis and networks monitoring. Structural cabling instruments are placed among strict world's leaders. They allows certification measures of telecommunication installations. As one of the very few companies, Fluke Networks has instruments with class IV accuracy to certify cat.7 installations. Among telecommunication solutions company offers wide range of analyzers, allowing detailed network traffic inspection and discovering installed devices. Software and hardware analyzers can verify and rate WANs, working on ATM, Frame Relay, PPP, HDLC, SONET standards. Fluke Networks offer includes:
Atel Electronics is a distributor of Fluke Networks products Manufacturer's website: http://www.flukenetworks.com |
Tested cables |
UTP, FTP, STP, RG59, RG6, CCTV |
---|---|
Single pair test | yes |
Wiremap test | yes |
Detected malfunctions |
break, short-circuit, crossed pairs, reverse pairs |
Detecting signals | Ethernet |
Detecting connected devices |
hub, network card |
Additional features |
locate cables from large distance (1 meter), precision locate cable pairs in wisps |
Operating temperature | 0°C ÷ 40°C |
Operating humidity |
5% ÷ 95%, non-condensing |
Power | 2x 9V 6F22 battery |
Warranty period | 12 months |
Manufacturer | Fluke Networks |
Toner parameters | |
Dimensions | 141x75x32 mm |
Display | LED |
Control | thumbwheel switch |
Auto power down | yes |
Ouptut power | 5V p-p |
Probe parameters | |
Dimensions | 222x48x32 mm |
Display |
8x LED, 1x Sync LED |
Control |
thumbwheel switch, volume control wheel |
Auto power down | yes |
Display |
LCD, monochrome |
---|---|
Tested cables |
UTP, FTP, SSTP, coaxial 75Ω/50Ω/93Ω |
Connectors |
RJ-11, RJ-45, F |
Cable length measure | 1500ft (460,0 m) |
Wiremap | compliant with TIA-568A/B |
Remote device detection |
switch, POTS, terminator |
Transmission speed indicator |
10 Mbps, 100 Mbps, 1000 Mbps, 2.5Gbps, 5Gbps, 10Gbps |
Detected malfunctions |
open, short, separated pairs, crossed pairs, reverse pairs |
Distance to breakage | yes |
Working in active networks | yes |
Tone generator |
digital (500 KHz), analog (400 Hz / 1 KHz) |
PoE detection | yes |
PoE standards |
802.3af, 802.3at, 802.3bt |
Dimensions | 163x76x36 mm |
Weight | 363 g |
Warranty | 12 months |
Manufaturer | Fluke Networks |
Display |
LCD, monochrome |
---|---|
Tested cables |
UTP, FTP, SSTP, coaxial 75Ω/50Ω/93Ω |
Connectors |
RJ-11, RJ-45, F |
Cable length measure | 1500ft (460,0 m) with a 0.3m resolution |
Wiremap | compliant with TIA-568A/B |
Remote device detection |
switch, POTS, terminator |
Transmission speed indicator |
10 Mbps, 100 Mbps, 1000 Mbps |
Detected malfunctions |
open, short, separated pairs, crossed pairs, reverse pairs |
Distance to breakage | yes |
Working in active networks | yes |
Tone generator |
digital (500 KHz), analog (400 Hz / 1 KHz) |
PoE detection | yes |
Dimensions | 163x76x36 mm |
Weight | 363 g |
Warranty | 12 months |
Manufaturer | Fluke Networks |
MicroScanner² Pro | |
---|---|
Display |
LCD, 1.75" x 0.85" |
Tested cables |
UTP, STP, FTP, RG59, RG9, CCTV |
Cable parameters test | yes |
Transmission type detection |
Half Duplex, Full Duplex |
Device type detection |
hub, network card |
Transmission speed detection |
10 Mbps, 100 Mbps, 1000 Mbps |
Cable length measure | 0.5 - 460 m |
Distance to break/short | yes |
Working in active networks | yes |
Continuous test | yes |
Wiremap test | yes |
Cable faults detection |
open, short, separated pairs, crossed pairs, reverse pairs |
Tone generation |
digital (500 KHz), analog (400 Hz / 1 KHz) |
PoE detection | yes |
Dimensions | 163x76x36 mm |
Warranty period | 12 months |
Manufacturer | Fluke Networks |
IntelliTone 200 Probe | |
Single pair test | yes |
Additional features |
locate cables from large distance, precision locate cable pairs in wisps |
Operating temperature | 0°C ÷ 40°C |
Operating humidity |
5% ÷ 95%, non-condensing |
Cable IQ | |
---|---|
Tested cables |
UTP, STP, FTP, SSTP, RG6, RG59, audio, security |
Qualification autotests |
1000BASE-T, 100BASE-TX, 10BASE-T, VoIP, 1394b S100, TELCO, Wiremap only, Coax |
Bandwidth verification |
10/100/1000 Mbps, VoIP |
Transmission type detection |
Half Duplex, Full Duplex |
Supported tests |
wiremap, cable length, signal performance, Ethernet port detection and identification, port identification, continuity, fault finding |
Detected devices |
telephones, network devices |
Video signal detection | yes |
Cable fault tests |
break, short, reversed pairs, crossed pairs, splitted pairs |
Highlight | yes |
Tone generator | inbuit |
Results storage | 250 records |
Power |
4xAA (NEDA 15A, IEC LR6) alkaline batteries |
Battery life |
20 hours of typical use, without backlight |
Weight | 0.55 kg |
Dimensions | 178x89x45 mm |
IntelliTone 200 | |
Display |
8x LED, 1x Sync LED |
Control |
thumbwheel switch, volume control wheel |
Single pair test | yes |
Wiremap test | yes |
Detected malfunctions |
break, short-circuit, crossed pairs, reverse pairs |
Additional features |
locate cables from large distance, precision locate cable pairs in wisps |
Operating temperature | 0°C ÷ 40°C |
Operating humidity |
5% ÷ 95%, non-condensing |
Dimensions | 222x48x32 mm |
Warranty period | 12 months |
Manufacturer | Fluke Networks |
Tested cables |
UTP, STP, FTP, SSTP, RG6, RG59, audio, security |
---|---|
Qualification autotests |
1000BASE-T, 100BASE-TX, 10BASE-T, VoIP, 1394b S100, TELCO, Wiremap only, Coax |
Bandwidth verification |
10/100/1000 Mbps, VoIP |
Transmission type detection |
Half Duplex, Full Duplex |
Supported tests |
wiremap, cable length, signal performance, Ethernet port detection and identification, port identification, continuity, fault finding |
Detected devices |
telephones, network devices |
Video signal detection | yes |
Cable fault tests |
break, short, reversed pairs, crossed pairs, splitted pairs |
Highlight | yes |
Tone generator | inbuit |
Results storage | 250 records |
Power |
4xAA (NEDA 15A, IEC LR6) alkaline batteries |
Battery life |
20 hours of typical use, without backlight |
Weight | 0.55 kg |
Dimensions | 178x89x45 mm |
Warranty period | 12 months |
Manufacturer | Fluke Networks |
Interface | Main RJ45 port for mapping all 4 UTP / STP cabling pairs. |
---|---|
Dimensions | 222x48x32 mm |
Display |
8x LED, 1x Sync LED |
Control |
thumbwheel switch, volume control wheel |
Auto power down | yes |
Measurement accuracy | ±0,25 dB |
---|---|
Connector |
removable, SC (standard), LC/ST (optional) |
Detector type | InGaAs |
Wavelength | 850/1300/1310/1490/1550/1625 nm |
Measurement range |
10 dBm ÷ -52 dBm (850 nm), 10 dBm ÷ -60 dBm (1300/1310/1490/1550/1625 nm) |
Measurement linearity for 850 nm |
± 0.2 dB (power from 0 dBm to -45 dBm), ± 0.25 dB (power < -45 dBm) |
Measurement linearity for 1300/1310/1490/1550/1625 nm |
± 0.1 dB (power from 0 dBm to -55 dBm), ± 0.2 dB (power > 0 dBm and < -55 dBm) |
Resolution | 0.01 dB |
Battery life | 50 h |
Memory | 1000 records |
Dimensions | 165x80x39 mm |
Operating temperatures | -10°C ÷ 50°C |
Operating humidity |
up to 95%, non-condensing |
Certificates |
CE, CSA, N10140 |
Weight | 278g |
Communication interface | USB |
Producer | Fluke Networks |
Connector type | SC |
---|---|
Wavelength | 1310/1550 nm |
Emitter type | laser |
Ouput power |
8 dBm (minimum), -7 dBm (typical) |
Source stability | ±0.25 dB over 8 h |
AA battery life | 30 h |
Dimensions | 142x81x41 mm |
Operating temperatures | -10°C ÷ 50°C |
Operating humidity |
up to 95%, non-condensing |
Certificates |
CE, CSA, N10140 |
Weight | 278g |
Fiber compatibility |
singlemode, multimode |
---|---|
Wavelength | 650 nm |
Connector |
standard 2,5 mm connector for SC/FC/ST optical connectors, 1,25 mm (LC/MU) with FL-NF380 |
Laser safety rating | Class II |
Max. output power | 1 mW |
Output modes |
continuous, flashing (2 Hz ÷ 3 Hz) |
Range |
3 km (multimode), 4 km (singlemode) |
Impact strength | 1m drop |
Vibration |
random, 2g, 5 Hz ÷ 500 Hz |
Altitude | 3000 m |
Operating temperature | 0°C ÷ 40°C |
Operating humidity |
0% ÷ 95%, non-condensing |
Dimensions | 157x52x37 mm |
Weight | 0,18 kg |
Power | 2x AA battery |
Battery life | > 80h in continuous mode |
Safety |
CSA C22.2 No. 1010.1 1992, EN 61010-1, CE |
Warranty period | 12 months |
Manufacturer | Fluke Networks |
Measurement accuracy | ±0,25 dB |
---|---|
Connector |
removable, SC (standard), LC/ST (optional) |
Detector type | InGaAs |
Wavelength | 850/1300/1310/1490/1550/1625 nm |
Measurement range |
10 dBm ÷ -52 dBm (850 nm), 10 dBm ÷ -60 dBm (1300/1310/1490/1550/1625 nm) |
Measurement linearity for 850 nm |
± 0.2 dB (power from 0 dBm to -45 dBm), ± 0.25 dB (power < -45 dBm) |
Measurement linearity for 1300/1310/1490/1550/1625 nm |
± 0.1 dB (power from 0 dBm to -55 dBm), ± 0.2 dB (power > 0 dBm and < -55 dBm) |
Resolution | 0.01 dB |
Battery life | 50 h |
Memory | 1000 records |
Dimensions | 165x80x39 mm |
Operating temperatures | -10°C ÷ 50°C |
Operating humidity |
up to 95%, non-condensing |
Certificates |
CE, CSA, N10140 |
Weight | 278g |
Communication interface | USB |
Producer | Fluke Networks |
Connector type | SC |
---|---|
Wavelength | 1310/1550 nm |
Emitter type | laser |
Ouput power |
8 dBm (minimum), -7 dBm (typical) |
Source stability | ±0.25 dB over 8 h |
AA battery life | 30 h |
Dimensions | 142x81x41 mm |
Operating temperatures | -10°C ÷ 50°C |
Operating humidity |
up to 95%, non-condensing |
Certificates |
CE, CSA, N10140 |
Weight | 278g |
Fiber compatibility |
singlemode, multimode |
---|---|
Wavelength | 650 nm |
Connector |
standard 2,5 mm connector for SC/FC/ST optical connectors, 1,25 mm (LC/MU) with FL-NF380 |
Laser safety rating | Class II |
Max. output power | 1 mW |
Output modes |
continuous, flashing (2 Hz ÷ 3 Hz) |
Range |
3 km (multimode), 4 km (singlemode) |
Impact strength | 1m drop |
Vibration |
random, 2g, 5 Hz ÷ 500 Hz |
Altitude | 3000 m |
Operating temperature | 0°C ÷ 40°C |
Operating humidity |
0% ÷ 95%, non-condensing |
Dimensions | 157x52x37 mm |
Weight | 0,18 kg |
Power | 2x AA battery |
Battery life | > 80h in continuous mode |
Safety |
CSA C22.2 No. 1010.1 1992, EN 61010-1, CE |
Warranty period | 12 months |
Manufacturer | Fluke Networks |
Tested cables |
UTP, FTP, STP, RG59, RG6, CCTV |
---|---|
Single pair test | yes |
Wiremap test | yes |
Detected malfunctions |
break, short-circuit, crossed pairs, reverse pairs |
Detecting signals | Ethernet |
Detecting connected devices |
hub, network card |
Additional features |
locate cables from large distance (1 meter), precision locate cable pairs in wisps |
Operating temperature | 0°C ÷ 40°C |
Operating humidity |
5% ÷ 95%, non-condensing |
Power | 2x 9V 6F22 battery |
Warranty period | 12 months |
Manufacturer | Fluke Networks |
Toner parameters | |
Dimensions | 141x75x32 mm |
Display | LED |
Control | thumbwheel switch |
Auto power down | yes |
Ouptut power | 5V p-p |
Probe parameters | |
Dimensions | 222x48x32 mm |
Display |
8x LED, 1x Sync LED |
Control |
thumbwheel switch, volume control wheel |
Auto power down | yes |
Interface | Main RJ45 port for mapping all 4 UTP / STP cabling pairs. |
---|---|
Dimensions | 222x48x32 mm |
Display |
8x LED, 1x Sync LED |
Control |
thumbwheel switch, volume control wheel |
Auto power down | yes |