| Standards | IEEE 802.3/u/z |
|---|---|
| Port #1 | 10/100 Mbps RJ-45 |
| Port #1 max. distance | 100m |
| Port #1 cable type | UTP/STP cat. 5 |
| Port #2 | 100 Mbps SC SM |
| TX wavelength | 1550nm |
| RX wavelength | 1310nm |
| Port #2 max. distance | 40km |
| Port #2 cable type | 8.3/125, 8.7/125, 9/125, 10/125 µm |
| Link Fault Pass-thorugh (LFP) | yes |
| Wave Division Multiplexing (WDM) | yes |
| Housing / case type | desktop |
| Operating temperature | 0°C ÷ 40°C |
| Operating humidity |
10% ÷ 90%, non-condensing |
| Warranty period | 24 months |
| Standards | IEEE 802.3/u/z |
|---|---|
| Port #1 | 10/100/1000 Mbps RJ-45 |
| Port #1 max. distance | 100m |
| Port #1 cable type | UTP/STP cat. 5 |
| Port #2 | 1000 Mbps SC SM |
| TX wavelength | 1310nm |
| RX wavelength | 1550nm |
| Port #2 max. distance | 40km |
| Port #2 cable type | 8.3/125, 8.7/125, 9/125, 10/125 µm |
| Wave Division Multiplexing (WDM) | yes |
| Housing / case type | desktop |
| Operating temperature | 0°C ÷ 40°C |
| Operating humidity |
10% ÷ 90%, non-condensing |
| Warranty period | 24 months |
| Standards | IEEE 802.3/u/z |
|---|---|
| Port #1 | 10/100/1000 Mbps RJ-45 |
| Port #1 max. distance | 100m |
| Port #1 cable type | UTP/STP cat. 5 |
| Port #2 | 1000 Mbps SC SM |
| TX wavelength | 1550nm |
| RX wavelength | 1310nm |
| Port #2 max. distance | 40km |
| Port #2 cable type | 8.3/125, 8.7/125, 9/125, 10/125 µm |
| Wave Division Multiplexing (WDM) | yes |
| Housing / case type | desktop |
| Operating temperature | 0°C ÷ 40°C |
| Operating humidity |
10% ÷ 90%, non-condensing |
| Standards | IEEE 802.3/ab/z |
|---|---|
| Port #1 | SFP+ |
| Port #2 | SFP+ |
| Link Fault Pass-thorugh (LFP) | no |
| Housing / case type | desktop / slot module |
| Dimensions | 110x95x26 mm |
| Operating temperature | -20°C ÷ 60°C |
| Operating humidity |
5% ÷ 90%, non-condensing |
| Power | DC12V |
| Certificates |
FCC Class B, CE |
| Warranty period | 2 years |
| Manufacturer | Wave Optics |
| Standards | IEEE 802.3/ab/z |
|---|---|
| Port #1 | 1G SFP slot |
| Port #2 | 1G SFP slot |
| Supporting | full duplex and half-duplex transmission |
| Transmission distance | depends on installed transceivers |
| Link Fault Pass-thorugh (LFP) | no |
| Housing / case type | desktop / slot module |
| Dimensions | 95x70x26 mm |
| Operating temperature | 0°C ÷ 70°C |
| Operating humidity |
5% ÷ 90%, non-condensing |
| Power | DC 5V |
| Certificates |
FCC Class B, CE |
| Warranty period | 2 years |
| Manufacturer | Wave Optics |
| Standards | IEEE 802.3/ab/z |
|---|---|
| Port #1 | 10/100 Mbps RJ-45 |
| Port #1 max. distance | 100 m |
| Port #1 cable type | UTP/STP |
| Port #2 | SFP |
| Link Fault Pass-thorugh (LFP) | no |
| Housing / case type | desktop / slot module |
| Operating temperature | 0°C ÷ 40°C |
| Operating humidity |
10% ÷ 90%, non-condensing |
| Certificates |
FCC Class B, CE |
| Warranty period | 2 years |
| Manufacturer | Wave Optics |
| REMOTE CONTROL | |
|---|---|
| IP monitoring | Web, SNMP |
| Sensors control | Administrative 3-level control of sensors using login |
| INTERFACE & PROTOCOL SUPPORT | |
| Interface | Access via any Internet browser. |
| LAN | Ethernet 10/100Mbit |
| Network protocols |
DHCP; HTTP; HTTPS; DynDNS; SNMP v1, v2c, v3; SMTP; FTP; Syslog; TLS; RADIUS; SSL; NTP and OpenVPN client |
| OS | Linux v.6.2 |
| Processor | 600 mHz |
| RAM | 128 Mb |
| Software | Built-in software for events processing. |
| Pings | Built-in ping |
| LEDs |
LINK, CAN, ACT, E1, E2, ERROR, ALARM |
| Clock | Built-in clock with time synchronization |
| Watchdog | Built-in watchdog timer |
| Maximum number of sensors | 70 |
| Maximum number of elements | 700 |
| POWER | |
| Power req | 1x 12V DC |
| Power consumption | 6 W |
| INLETS/OUTLETS | |
| Ethernet | 100Mbit |
| Micro USB AB | USB 2.0 micro |
| Analog port | 4x6P4C for connecting any analog sensor. |
| CAN BUS | –1x6P6C for connection of max 10 CAN. Fuse protection on each line.-- |
| Alarm relay | 2 x 12V 0.25A alarm port for VT103 Alarm Beacon (#08264) or VT105 (#08344) |
| Dry contact inputs | 2x digital inputs |
| EXTERNAL MEMORY | |
| Micro SD card | micro SD (SDXC do 512 Gb) |
| FEATURES | |
| Installation | desktop |
| Dimensions | (WxHxD) 150mm x 29mm x 100mm |
| Net weight | 0,5 kg |
| Working temperature | Min. -10° C - Max. 80° C |
| Supply includes |
Monitoring unit, 12VDC power supply, RJ-45 1m patch cable, manual, warranty, plugs, 4 self-adhesive rubber legs. |
| Warranty | 3 years |
| REMOTE CONTROL | |
|---|---|
| IP monitoring |
Web, SNMP, SMS (LTE modem art. VT7670 is ordered separately!) |
| Sensors control | Administrative 3-level control of sensors using login |
| INTERFACE & PROTOCOL SUPPORT | |
| Interface | Access via any Internet browser. |
| LAN | Ethernet 10/100/1000Mbit |
| Network protocols |
HTTP; HTTPS; DynDNS; SSL; SNMP v1, v2c, v3; SMTP; FTP; Syslog; RADIUS; OpenVPN; TLS (v1.0, v1.1, v1.2, v1.3) |
| OS | Linux 6.2 |
| Processor | Cortex A7 720MHz |
| Total CPU cores | 2 |
| RAM | 128MB |
| Software | Built-in software for events processing. |
| Alert type |
FTP, syslog, SMTP or SNMP, SMS (LTE modem #03133 is ordered separately) |
| A maximum number of "mail to" recipients | 20 |
| A maximum number of "SMS to" recipients in an SMS notification | 20 |
| Pings | Built-in ping |
| LEDs |
CAN, ACT, E1, E2, Error, Relays R1 and R2 |
| Clock | Built-in clock with time synchronization |
| Watchdog | Built-in watchdog timer |
| The maximum amount of sensors | 130 |
| The maximum amount of elements | 1000 |
| USB cameras | x1 |
| IP cameras | x4 |
| POWER | |
| Power req |
90-240V, IEC C14, Fuse 1A or DC (24V/48V) |
| Power consumption | 10W |
| Power reservation |
12V, built-in voltage monitor |
| INLETS/OUTLETS | |
| Ethernet | 100Mbit |
| USB | USB 2.0 typ C |
| Analog port | 8x6P4C for connecting any analog sensor. |
| CAN BUS |
1 x 6P6C for connecting up to 32 CAN sensors (over 12 sensors, regeneration of the signal is required using the CAN # 03880 power module). Fuse protection on each line. |
| Relay outputs | 2 ports |
| Alarm relay | 2 x 12V 0.25A alarm port for VT103 Alarm Beacon (#08264) or VT105 (#08344) |
| Dry contact inputs | 16 x dry contacts input |
| EXTERNAL MEMORY | |
| Micro SD card |
Micro SD card slot (SDXC up to 512 Gb - saving logs, record video, run software, databases and scripts) |
| FEATURES | |
| Installation | 19" cabinet or desktop |
| Dimensions | (WxHxD) 440mm × 44mm × 90mm |
| Net weight | 1.5 kg |
| Working temperature | Min. -10° C - Max. 80° C |
| Supply includes |
Monitoring unit, power cable 240V, RJ45 cord, manual, warranty, 4 self-adhesive rubber legs, plugs, 19" mounting angles. |
| Warranty | 3 years |
| REMOTE CONTROL | |
|---|---|
| IP monitoring |
Web, SNMP, SMS (LTE modem art. VT7670 is ordered separately!) |
| Sensors control | Administrative 3-level control of sensors using login |
| INTERFACE & PROTOCOL SUPPORT | |
| Interface | Access via any Internet browser. |
| LAN | Ethernet 10/100/1000Mbit |
| Network protocols |
DHCP; HTTP; HTTPS; DynDNS; SSL; SNMP v1, v2c, v3; SMTP; FTP; Syslog; RADIUS; OpenVPN; TLS (v1.0, v1.1, v1.2, v1.3) |
| OS | Linux 6.2 |
| Processor | Cortex A7 720MHz |
| Total CPU cores | 2 |
| RAM | 128MB |
| Software | Built-in software for events processing. |
| Alert type |
FTP, syslog, SMTP or SNMP, SMS (LTE modem #03133 is ordered separately) |
| A maximum number of "mail to" recipients | 20 |
| A maximum number of "SMS to" recipients in an SMS notification | 20 |
| Pings | Built-in ping |
| LEDs |
CAN, ACT, E1, E2, Error, Relays R1 and R2 |
| Clock | Built-in clock with time synchronization |
| Watchdog | Built-in watchdog timer |
| The maximum amount of sensors | 130 |
| The maximum amount of elements | 1000 |
| USB cameras | x1 |
| IP cameras | x4 |
| POWER | |
| Power req | 2x IEC C14 90-240V 1A fuse or 2x DC (24V/48V) or 1x AC + 1x DC |
| Power consumption | 10W |
| Power reservation |
12V, built-in voltage monitor |
| INLETS/OUTLETS | |
| Ethernet | 100Mbit |
| USB | USB 2.0 typ C |
| Analog port | 8x6P4C for connecting any analog sensor. |
| CAN BUS |
1 x 6P6C for connecting up to 32 CAN sensors (over 12 sensors, regeneration of the signal is required using the CAN # 03880 power module). Fuse protection on each line. |
| Relay outputs | 2 ports |
| Alarm relay | 2 x 12V 0.25A alarm port for VT103 Alarm Beacon (#08264) or VT105 (#08344) |
| Dry contact inputs | 16 x dry contacts input |
| EXTERNAL MEMORY | |
| Micro SD card |
Micro SD card slot (SDXC up to 512 Gb - saving logs, record video, run software, databases and scripts) |
| FEATURES | |
| Installation | 19" cabinet or desktop |
| Dimensions | (WxHxD) 440mm × 44mm × 90mm |
| Net weight | 1.5 kg |
| Working temperature | Min. -10° C - Max. 80° C |
| Supply includes |
Monitoring unit, power cable 240V, RJ45 cord, manual, warranty, 4 self-adhesive rubber legs, plugs, 19" mounting angles. |
| Warranty | 3 years |
| REMOTE CONTROL | |
|---|---|
| IP monitoring |
Web, SNMP, SMS (LTE modem art. VT7670 is ordered separately!) |
| Sensors control | Administrative 3-level control of sensors using login |
| INTERFACE & PROTOCOL SUPPORT | |
| Interface | Access via any Internet browser. |
| LAN | Ethernet 10/100Mbit |
| Network protocols |
DHCP; HTTP; HTTPS; DynDNS; SSL; SNMP v1, v2c, v3; SMTP; FTP; Syslog; RADIUS; OpenVPN; TLS (v1.0, v1.1, v1.2, v1.3) |
| OS | Linux 6.2 |
| Processor | Cortex A7 1GHz |
| Total CPU cores | 2 |
| RAM | 128MB |
| Software | Built-in software for events processing. |
| Alert type |
FTP, syslog, SMTP or SNMP, SMS (LTE modem #03133 is ordered separately) |
| A maximum number of "mail to" recipients | 20 |
| A maximum number of "SMS to" recipients in an SMS notification | 20 |
| Pings | Built-in ping |
| LEDs |
CAN, ACT, E1, E2, Error, Relays R1 and R2 |
| Clock | Built-in clock with time synchronization |
| Watchdog | Built-in watchdog timer |
| The maximum amount of sensors | 150 |
| The maximum amount of elements | 1000 |
| USB cameras | x1 |
| IP cameras | x4 |
| POWER | |
| Power req |
90-240V, IEC C14, Fuse 1A or DC (24V/48V) |
| Power consumption | 10W |
| Power reservation |
12V, built-in voltage monitor |
| INLETS/OUTLETS | |
| Ethernet | 100Mbit |
| USB | USB 2.0 typ C |
| Analog port | 8x6P4C for connecting any analog sensor. |
| CAN BUS |
2 x 6P6C for connecting up to 32 CAN sensors (over 12 sensors, regeneration of the signal is required using the CAN # 03880 power module). Fuse protection on each line. |
| Relay outputs | 2 ports |
| Alarm relay | 2 x 12V 0.25A alarm port for VT103 Alarm Beacon (#08264) or VT105 (#08344) |
| Dry contact inputs | 32 x dry contacts input + 8 x dry contacts output |
| EXTERNAL MEMORY | |
| Micro SD card |
Micro SD card slot (SDXC up to 512 Gb - saving logs, record video, run software, databases and scripts) |
| FEATURES | |
| Installation | 19" cabinet or desktop |
| Dimensions | (WxHxD) 440mm × 44mm × 90mm |
| Net weight | 1.5 kg |
| Working temperature | Min. -10° C - Max. 80° C |
| Supply includes |
Monitoring unit, power cable 240V, RJ45 cord, manual, warranty, 4 self-adhesive rubber legs, plugs, 19" mounting angles. |
| Warranty | 3 years |
Page 5 of 22
|