| Standards |
IEEE 802.3i, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3x, IEEE 802.1q, IEEE 802.1p, |
|---|---|
| Fan Quantity | 0 |
| Copper ports |
4× 10/100/1000 Mbps RJ45 Ports, 1× Gigabit SFP/RJ45 Combo Slot, 1× Gigabit SFP Slot |
| Switching Capacity | 12Gbps |
| Packet Forwarding Rate | 8.93 Mpps |
| Mac Address Table | 8K |
| Jumbo Frame | 15 KB |
| Packet Buffer Memory | 4 Mb |
| Auto MDI/MDI-X | yes |
| Auto-negotiation (Nway) | yes |
| Switching architecture / speed | Store and Forward |
| Quality of Service |
Support Port-Based/802.1p/DSCP priority, Support 4 priority queues, Rate Limit, Storm Control |
| L2 Features |
IGMP Snooping V1/V2/V3, Static Link Aggregation, Port Mirroring, Cable Diagnostics, Loop Prevention, PoE Auto Recovery, Extend Mode |
| VLAN |
Supports up to 32 VLANs simultaneously (out of 4K VLAN IDs), MTU/Port/Tag VLAN |
| Management | |
| Omada App |
Yes. Requires the use of Omada Hardware Controller, Omada Cloud-Based Controller, or Omada Software Controller. |
| Centralized Management |
Omada Cloud-Based Controller, Omada Hardware Controller, Omada Software Controller |
| Cloud Access |
Yes. Requires the use of Omada Hardware Controller, Omada Cloud-Based Controller, or Omada Software Controller. |
| Zero-Touch Provisioning | Yes. Requires the use of Omada Cloud-Based Controller |
| Management Features |
Web-based GUI, DHCP Client, Cable Diagnostics, Automatic Device Discovery, Batch Configuration, Batch Firmware Upgrading, Unified Configuration |
| Installation |
DIN-rail mounting, Wall mounting |
| Dimensions | 5.1 × 3.7 × 1.8 in (129 × 95 × 45 mm) |
| Operating temperature | -40°C ÷ 75°C |
| Operating humidity |
5% ÷ 95%, non-condensing |
| Power | 9.6-60V 1+1 Redundant DC Power Input |
| Certificates |
CE, FCC, RoHS |
| Package Contents |
IES206G, DIN-Rail Mounting Bracket, Wall-Mounting Plates, Installation Guide |
| Warranty | 5 years |
| Manufacturer | TP-Link |
| Standards |
IEEE 802.3i, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3af, IEEE 802.3x, IEEE 802.1q, IEEE 802.1p, IEEE 802.3at |
|---|---|
| Fan Quantity | 0 |
| Copper ports |
1× 10/100/1000 Mbps PoE++ RJ45 Ports, 3× 10/100/1000 Mbps PoE+ RJ45 Ports, 1× Gigabit SFP/RJ45 Combo Slot, 1× Gigabit SFP Slot |
| PoE Ports |
Standard 802.3af/at/bt compliant, PoE++ Ports (802.3af/at/bt PoE) 1 Port up to 60W per port, PoE+ Ports (802.3af/at PoE) 3 Ports, up to 30W per port |
| PoE Budget |
60W (Input 12V / 7.2A - 21V / 3.7A)), 120W (Input 21V / 6.7A - 46V / 3.1A), Fast PoE, Perpetual PoE |
| Switching Capacity | 12Gbps |
| Packet Forwarding Rate | 8.93 Mpps |
| Mac Address Table | 8K |
| Jumbo Frame | 15 KB |
| Packet Buffer Memory | 4 Mb |
| Auto MDI/MDI-X | yes |
| Auto-negotiation (Nway) | yes |
| Switching architecture / speed | Store and Forward |
| Quality of Service |
Support Port-Based/802.1p/DSCP priority, Support 4 priority queues, Rate Limit, Storm Control |
| L2 Features |
IGMP Snooping V1/V2/V3, Static Link Aggregation, Port Mirroring, Cable Diagnostics, Loop Prevention, PoE Auto Recovery, Extend Mode |
| VLAN |
Supports up to 32 VLANs simultaneously (out of 4K VLAN IDs), MTU/Port/Tag VLAN |
| Management | |
| Omada App |
Yes. Requires the use of Omada Hardware Controller, Omada Cloud-Based Controller, or Omada Software Controller. |
| Centralized Management |
Omada Cloud-Based Controller, Omada Hardware Controller, Omada Software Controller |
| Cloud Access |
Yes. Requires the use of Omada Hardware Controller, Omada Cloud-Based Controller, or Omada Software Controller. |
| Zero-Touch Provisioning | Yes. Requires the use of Omada Cloud-Based Controller |
| Management Features |
Web-based GUI, DHCP Client, Cable Diagnostics, Automatic Device Discovery, Batch Configuration, Batch Firmware Upgrading, Unified Configuration |
| Installation |
DIN-rail mounting, Wall mounting |
| Dimensions | 6.1 × 4.7 × 2.4 in (155 × 120 × 60 mm) |
| Operating temperature | -40°C ÷ 75°C |
| Operating humidity |
5% ÷ 95%, non-condensing |
| Power | 12-57V 1+1 Redundant DC Power Input |
| Certificates |
CE, FCC, RoHS |
| Package Contents |
IES206GPP, DIN-Rail Mounting Bracket, Wall-Mounting Plates, Installation Guide |
| Warranty | 5 years |
| Manufacturer | TP-Link |
| Standards |
IEEE 802.3i, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3x, IEEE 802.1q, IEEE 802.1p, |
|---|---|
| Fan Quantity | 0 |
| Copper ports |
6× 10/100/1000 Mbps RJ45 Ports, 2× Gigabit SFP/RJ45 Combo Slots |
| Switching Capacity | 16Gbps |
| Packet Forwarding Rate | 11.9 Mpps |
| Mac Address Table | 8K |
| Jumbo Frame | 15 KB |
| Packet Buffer Memory | 4 Mb |
| Auto MDI/MDI-X | yes |
| Auto-negotiation (Nway) | yes |
| Switching architecture / speed | Store and Forward |
| Quality of Service |
Support Port-Based/802.1p/DSCP priority, Support 4 priority queues, Rate Limit, Storm Control |
| L2 Features |
IGMP Snooping V1/V2/V3, Static Link Aggregation, Port Mirroring, Cable Diagnostics, Loop Prevention, PoE Auto Recovery, Extend Mode |
| VLAN |
Supports up to 32 VLANs simultaneously (out of 4K VLAN IDs), MTU/Port/Tag VLAN |
| Management | |
| Omada App |
Yes. Requires the use of Omada Hardware Controller, Omada Cloud-Based Controller, or Omada Software Controller. |
| Centralized Management |
Omada Cloud-Based Controller, Omada Hardware Controller, Omada Software Controller |
| Cloud Access |
Yes. Requires the use of Omada Hardware Controller, Omada Cloud-Based Controller, or Omada Software Controller. |
| Zero-Touch Provisioning | Yes. Requires the use of Omada Cloud-Based Controller |
| Management Features |
Web-based GUI, DHCP Client, Cable Diagnostics, Automatic Device Discovery, Batch Configuration, Batch Firmware Upgrading, Unified Configuration |
| Installation |
DIN-rail mounting, Wall mounting |
| Dimensions | 5.1 × 3.7 × 1.8 in (129 × 95 × 45 mm) |
| Operating temperature | -40°C ÷ 75°C |
| Operating humidity |
5% ÷ 95%, non-condensing |
| Power | 9.6-60V 1+1 Redundant DC Power Input |
| Certificates |
CE, FCC, RoHS |
| Package Contents |
IES208G, DIN-Rail Mounting Bracket, Wall-Mounting Plates, Installation Guide |
| Warranty | 5 years |
| Manufacturer | TP-Link |
| Standards |
IEEE 802.3i, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3af, IEEE 802.3x, IEEE 802.1q, IEEE 802.1p, IEEE 802.3at |
|---|---|
| Fan Quantity | 0 |
| Copper ports |
2× 10/100/1000 Mbps PoE++ RJ45 Ports, 6× 10/100/1000 Mbps PoE+ RJ45 Ports, 2× Gigabit SFP/RJ45 Combo Slots |
| PoE Ports |
Standard 802.3af/at/bt compliant, PoE++ Ports (802.3af/at/bt PoE) 2 Ports, up to 60W per port, PoE+ Ports (802.3af/at PoE) 6 Ports, up to 30W per port |
| PoE Budget |
60W (Input 12V / 7.2A - 21V / 3.7A)), 120W (Input 21V / 6.7A - 46V / 3.1A), 240W (Input 46V / 5.7A - 57V / 4.4A), Fast PoE, Perpetual PoE |
| Switching Capacity | 20Gbps |
| Packet Forwarding Rate | 14,88 Mpps |
| Mac Address Table | 8K |
| Jumbo Frame | 15 KB |
| Packet Buffer Memory | 4 Mb |
| Auto MDI/MDI-X | yes |
| Auto-negotiation (Nway) | yes |
| Switching architecture / speed | Store and Forward |
| Quality of Service |
Support Port-Based/802.1p/DSCP priority, Support 4 priority queues, Rate Limit, Storm Control |
| L2 Features |
IGMP Snooping V1/V2/V3, Static Link Aggregation, Port Mirroring, Cable Diagnostics, Loop Prevention, PoE Auto Recovery, Extend Mode |
| VLAN |
Supports up to 32 VLANs simultaneously (out of 4K VLAN IDs), MTU/Port/Tag VLAN |
| Management | |
| Omada App |
Yes. Requires the use of Omada Hardware Controller, Omada Cloud-Based Controller, or Omada Software Controller. |
| Centralized Management |
Omada Cloud-Based Controller, Omada Hardware Controller, Omada Software Controller |
| Cloud Access |
Yes. Requires the use of Omada Hardware Controller, Omada Cloud-Based Controller, or Omada Software Controller. |
| Zero-Touch Provisioning | Yes. Requires the use of Omada Cloud-Based Controller |
| Management Features |
Web-based GUI, DHCP Client, Cable Diagnostics, Automatic Device Discovery, Batch Configuration, Batch Firmware Upgrading, Unified Configuration |
| Installation |
DIN-rail mounting, Wall mounting |
| Dimensions | 6.1 × 4.7 × 2.4 in (155 × 120 × 60 mm) |
| Operating temperature | -40°C ÷ 75°C |
| Operating humidity |
5% ÷ 95%, non-condensing |
| Power | 12-57V 1+1 Redundant DC Power Input |
| Certificates |
CE, FCC, RoHS |
| Package Contents |
IES210GPP, DIN-Rail Mounting Bracket, Wall-Mounting Plates, Installation Guide |
| Warranty | 5 years |
| Manufacturer | TP-Link |
| Physical Ports | |
|---|---|
| 100/1000 Base-T(X) Ports in RJ45 Auto MDI/MDIX | 4 w/PoE |
| 1000Base-FX SFP ports | 2 |
| Technology | |
| Ethernet Standards |
IEEE 802.3u for 100Base-TX and 100Base-FX, IEEE 802.3ab for 1000Base-T, IEEE 802.3z for 1000Base-X |
| LED Indicators |
power, RJ45 ports (5) |
| Power | Dual DC inputs. 48÷57VDC on 4-pin terminal block |
| Power consumption (typical) | 6.5W |
| Physical Characteristic | |
| Enclosure | IP-40 |
| Dimension (W x H x D) | 33mm x 115mm x 85mm |
| Weight | 350g |
| Environmental | |
| Storage Temperature | -40÷85°C |
| Operating Temperature | -40÷85°C |
| Operating Humidity | 5%÷95% Non-condensing |
| Regulatory approvals | |
| EMI |
FCC Part 15, CISPR (EN55022) class A, EN50155 (EN50121-3-2, EN55011, EN50121-4) |
| EMS |
EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11 |
| Shock | IEC60068-2-27 |
| Free Fall | IEC60068-2-32 |
| Vibration | IEC60068-2-6 |
| Safety | EN60950-1 |
| Warranty | |
| Warranty period | 5 years |
| Physical Ports | |
|---|---|
| 10/100 Base-T(X) Ports in RJ45 Auto MDI/MDIX w/PoE (PSE) | 8 |
| 1000 COMBO with SFP | 2 |
| RS-232 Serial Console Port | RS-232 in RJ45 connector with console cable (9600bps 8 N 1) |
| Technology | |
| Ethernet Standards |
IEEE 802.3 for 10BaseT, IEEE 802.3u for 100BaseT(X), IEEE 802.3x for Flow control, IEEE 802.1D for STP (Spanning Tree Protocol), IEEE 802.1p for COS (Class of Service), IEEE 802.1Q for VLAN Tagging, IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol), IEEE 802.1X for Authentication, IEEE 802.3ad for LACP (Link Aggregation Control Protocol), IEEE 802.1AB for LLDP (Link Layer Discovery Protocol), IEEE 802.3at PoE+ specification (up to 15.4 Watts per port for P.S.E) |
| MAC Table | 8192 MAC addresses |
| Priority Queues | 4 |
| Processing | Store-and-Forward |
| Switching latency | 7 µs |
| Switching bandwidth | 5.6 Gbps |
| Max. Number of Available VLANs | 4096 |
| IGMP multicast groups | 1024 |
| Port rate limiting | User Define |
| Security Features |
Enable/disable ports, MAC based port security, Port based network access control (802.1x), VLAN (802.1q ) to segregate and secure network traffic, Supports Q-in-Q VLAN for performance & security to expand the VLAN space, Radius centralized password management, SNMPv3 encrypted authentication and access security |
| Software Features |
STP/RSTP (IEEE 802.1D/w), Redundant Ring (O-Ring) with recovery time less than 10ms over 250 units, TOS/Diffserv supported, Quality of Service (802.1p) for real-time traffic, VLAN (802.1Q) with VLAN tagging and GVRP supported, IGMP Snooping for multicast filtering, Port configuration, Port status, Port statistics, Port monitoring, Port security, SNTP for synchronizing of clocks over network, Support PTP Client (Precision Time Protocol) clock synchronization, DHCP Server / Client support, Support ModbusTCP, Port Trunk support, MVR (Multicast VLAN Registration) support |
| Network Redundancy |
STP, RSTP, MSTP, O-Ring, Open-Ring, O-RSTP |
| DDM Function |
Voltage, Current, Temperature |
| LED Indicators | |
| Power /PoE Indicator |
Green - Ready LED x 3, Green - PoE LED x 8 |
| Ring Master indicator | Green - Flashing to indicate system operated in O-Ring Master mode |
| O-Ring indicator | Green - Indicate system operated in O-Ring mode |
| Fault indicator | Amber - Indicate unexpected event occurred |
| 10/100TX RJ45 port indicator |
Green for port Link/Act, Amber for Duplex/Collision |
| 1000X / Fiber port indicator | Green for port Link/Act |
| Fault contact | |
| Relay | Relay output to carry capacity of 1A at 24VDC |
| Power | |
| Input power | Dual DC inputs. 24 ~ 36VDC on 6-pin terminal block |
| Power consumption (typical) | 11.52W |
| Overload current protection | present |
| Physical Characteristic | |
| Enclosure | IP-30 |
| Dimension (W x D x H) | 74.3mm x 109.2mm x 153.6mm |
| Weight | 1260g |
| Environmental | |
| Storage Temperature | -40÷85°C(-40÷185°F) |
| Operating Temperature | -40÷70°C (-40÷158°F) |
| Operating Humidity | 5%÷95% Non-condensing |
| Regulatory approvals | |
| EMI |
FCC Part 15, CISPR (EN55022) class A |
| EMS |
EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11 |
| Shock | IEC60068-2-27 |
| Free Fall | IEC60068-2-32 |
| Vibration | IEC60068-2-6 |
| Safety | EN60950-1 |
| Warranty | |
| Warranty period | 5 years |
| Physical Ports | |
|---|---|
| 10/100 Base-T(X) Ports in RJ45 Auto MDI/MDIX w/PoE (PSE) | 8 |
| 1000 COMBO with SFP | 2 |
| RS-232 Serial Console Port | RS-232 in RJ45 connector with console cable (9600bps 8 N 1) |
| Technology | |
| Ethernet Standards |
IEEE 802.3 for 10BaseT, IEEE 802.3u for 100BaseT(X), IEEE 802.3x for Flow control, IEEE 802.1D for STP (Spanning Tree Protocol), IEEE 802.1p for COS (Class of Service), IEEE 802.1Q for VLAN Tagging, IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol), IEEE 802.1X for Authentication, IEEE 802.3ad for LACP (Link Aggregation Control Protocol), IEEE 802.1AB for LLDP (Link Layer Discovery Protocol), IEEE 802.3at PoE+ specification (up to 30 Watts per port for P.S.E) |
| MAC Table | 8192 MAC addresses |
| Priority Queues | 4 |
| Processing | Store-and-Forward |
| Switching latency | 7 µs |
| Switching bandwidth | 5.6 Gbps |
| Max. Number of Available VLANs | 4096 |
| IGMP multicast groups | 1024 |
| Port rate limiting | User Define |
| Security Features |
Enable/disable ports, MAC based port security, Port based network access control (802.1x), VLAN (802.1q ) to segregate and secure network traffic, Supports Q-in-Q VLAN for performance & security to expand the VLAN space, Radius centralized password management, SNMPv3 encrypted authentication and access security |
| Software Features |
STP/RSTP (IEEE 802.1D/w), Redundant Ring (O-Ring) with recovery time less than 10ms over 250 units, TOS/Diffserv supported, Quality of Service (802.1p) for real-time traffic, VLAN (802.1Q) with VLAN tagging and GVRP supported, IGMP Snooping for multicast filtering, Port configuration, Port status, Port statistics, Port monitoring, Port security, SNTP for synchronizing of clocks over network, Support PTP Client (Precision Time Protocol) clock synchronization, DHCP Server / Client support, Support ModbusTCP, Port Trunk support, MVR (Multicast VLAN Registration) support |
| Network Redundancy |
STP, RSTP, MSTP, O-Ring, Open-Ring, O-RSTP |
| DDM Function |
Voltage, Current, Temperature |
| LED Indicators | |
| Power /PoE Indicator |
Green - Ready LED x 3, Green - PoE LED x 8 |
| Ring Master indicator | Green - Flashing to indicate system operated in O-Ring Master mode |
| O-Ring indicator | Green - Indicate system operated in O-Ring mode |
| Fault indicator | Amber - Indicate unexpected event occurred |
| 10/100TX RJ45 port indicator |
Green for port Link/Act, Amber for Duplex/Collision |
| 1000X / Fiber port indicator | Green for port Link/Act |
| Fault contact | |
| Relay | Relay output to carry capacity of 1A at 24VDC |
| Power | |
| Input power | Dual DC inputs. 50÷57VDC on 6-pin terminal block |
| Power consumption (typical) | 7.68W |
| Overload current protection | present |
| Physical Characteristic | |
| Enclosure | IP-30 |
| Dimension (W x D x H) | 74.3mm x 109.2mm x 153.6mm |
| Weight | 1185g |
| Environmental | |
| Storage Temperature | -40÷85°C(-40÷185°F) |
| Operating Temperature | -40÷70°C (-40÷158°F) |
| Operating Humidity | 5%÷95% Non-condensing |
| Regulatory approvals | |
| EMI |
FCC Part 15, CISPR (EN55022) class A |
| EMS |
EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11 |
| Shock | IEC60068-2-27 |
| Free Fall | IEC60068-2-32 |
| Vibration | IEC60068-2-6 |
| Safety | EN60950-1 |
| Warranty | |
| Warranty period | 5 years |
| Physical Ports | |
|---|---|
| 100/1000 Base-T(X) Ports in RJ45 Auto MDI/MDIX | 8 w/PoE |
| 1000Base-FX SFP ports | 2 |
| Technology | |
| Ethernet Standards |
IEEE 802.3u for 100Base-TX and 100Base-FX, IEEE 802.3ab for 1000Base-T, IEEE 802.3z for 1000Base-X |
| LED Indicators |
power, RJ45 ports, SFP slots, PoE (8) |
| Power | Dual DC inputs. 48÷57VDC on 4-pin terminal block |
| Power consumption (typical) | 12W |
| PoE standards |
802.3at, 802.3af |
| PoE budget | 200W |
| Physical Characteristic | |
| Enclosure | IP-40 |
| Dimension (W x H x D) | 48mm x 142mm x 116mm |
| Weight | 580g |
| Environmental | |
| Storage Temperature | -40÷85°C |
| Operating Temperature | -40÷85°C |
| Operating Humidity | 5%÷95% Non-condensing |
| Regulatory approvals | |
| EMI |
FCC Part 15, CISPR (EN55022) class A, EN50155 (EN50121-3-2, EN55011, EN50121-4) |
| EMS |
EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11 |
| Shock | IEC60068-2-27 |
| Free Fall | IEC60068-2-32 |
| Vibration | IEC60068-2-6 |
| Safety | EN60950-1 |
| Warranty | |
| Warranty period | 5 years |
| Physical Ports | |
|---|---|
| 10/100/1000 Base-T(X) Ports in RJ45 Auto MDI/MDIX (with PoE) | 8 |
| 100/1000 SFP | 4 |
| RS-232 Serial Console Port | RS-232 in RJ45 connector with console cable (115200bps 8 N 1) |
| Technology | |
| Ethernet Standards |
IEEE 802.3 for 10Base-T, IEEE 802.3u for 100Base-TX and 100Base-FX, IEEE 802.3ab for 1000Base-T, IEEE 802.z for 1000Base-X, IEEE 802.3x for Flow control, IEEE 802.3ad for LACP (Link Aggregation Control Protocol), IEEE 802.1p for COS (Class of Service), IEEE 802.1Q for VLAN Tagging, IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol), IEEE 802.1s for MSTP (Multiple Spanning Tree Protocol), IEEE 802.1x for Authentication, IEEE 802.1AB for LLDP (Link Layer Discovery Protocol), IEEE 802.3at PoE specification (up to 30 Watts per port for P.S.E.), IEEE 1588-2002 |
| MAC Table | 8192 MAC addresses |
| Priority Queues | 8 |
| Processing | Store-and-Forward |
| Switching latency | 7 µs |
| Switching bandwidth | 28 Gbps |
| Max. Number of Available VLANs | 256 |
| IGMP multicast groups | 256 for each VLAN |
| Port rate limiting | User Define |
| Security Features |
Enable/disable ports, MAC based port security, Port based network access control (802.1x), VLAN (802.1q ) to segregate and secure network traffic, Radius centralized password management, SNMPv3 encrypted authentication and access security |
| Software Features |
STP/RSTP (IEEE 802.1D/w), Redundant Ring (O-Ring) with recovery time less than 30ms over 250 units, TOS/Diffserv supported, Quality of Service (802.1p) for real-time traffic, VLAN (802.1Q) with VLAN tagging and GVRP supported, IGMP Snooping for multicast filtering, Port configuration, Port status, Port statistics, Port monitoring, Port security, Modbus TCP |
| Network Redundancy |
O-Ring, Open-Ring, O-Chain, MRP, MSTP (RSTP/STP compatible) |
| LED Indicators | |
| Ring Master indicator | Green - indicates system operated in O-Ring Master mode |
| Ring Indicator |
Green - Indicates that the system operating in O-Ring mode, Green Blinking - Indicates that the Ring is broken. |
| Fault indicator | Amber - Indicates unexpected event occurred |
| 100/1000Base-X SFP Port Indicator | Green for port Link/Act. |
| 10/100/1000TX RJ45 port indicator | Dual color LED - Green for 1000Mbps Link/Act indicator. Amber for 10/100Mbps Link/Act indicator |
| PoE indicator | Green - PoE enabled LED x 8 |
| Power | |
| Input power | Dual DC inputs. 50~57VDC on 6-pin terminal block |
| Power consumption (typical) | 13.2Watts (power device not included) |
| Overload current protection | present |
| Reverse polarity protection | not present |
| Physical Characteristic | |
| Enclosure | IP-30 |
| Dimension (W x D x H) | 96.4 (W) x 105.5 (D) x 154 (H) mm (3.8 x 4.15 x 6.06 inch) |
| Weight | 1205g |
| Environmental | |
| Storage Temperature | -40÷85°C(-40÷185°F) |
| Operating Temperature | -40÷70°C (-40÷158°F) |
| Operating Humidity | 5%÷95% Non-condensing |
| Regulatory approvals | |
| EMI |
FCC Part 15, CISPR (EN55022) class A |
| EMS |
EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11 |
| Shock | IEC60068-2-27 |
| Free Fall | IEC60068-2-32 |
| Vibration | IEC60068-2-6 |
| Safety | EN60950 |
| Warranty | |
| Warranty period | 5 years |
| Physical Ports | |
|---|---|
| 10/100/1000 Base-T(X) Ports in RJ45 Auto MDI/MDIX (with PoE) | 8 |
| 100/1000 SFP | 4 |
| RS-232 Serial Console Port | RS-232 in RJ45 connector with console cable (115200bps 8 N 1) |
| Technology | |
| Ethernet Standards |
IEEE 802.3 for 10Base-T, IEEE 802.3u for 100Base-TX and 100Base-FX, IEEE 802.3ab for 1000Base-T, IEEE 802.z for 1000Base-X, IEEE 802.3x for Flow control, IEEE 802.3ad for LACP (Link Aggregation Control Protocol), IEEE 802.1p for COS (Class of Service), IEEE 802.1Q for VLAN Tagging, IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol), IEEE 802.1s for MSTP (Multiple Spanning Tree Protocol), IEEE 802.1x for Authentication, IEEE 802.1AB for LLDP (Link Layer Discovery Protocol), IEEE 802.3at PoE specification (up to 30 Watts per port for P.S.E.) |
| MAC Table | 8192 MAC addresses |
| Priority Queues | 8 |
| Processing | Store-and-Forward |
| Switching latency | 7 µs |
| Switching bandwidth | 12 Gbps |
| Max. Number of Available VLANs | 4095 |
| IGMP multicast groups | 128 for each VLAN |
| Port rate limiting | User Define |
| Security Features |
Enable/disable ports, MAC based port security, Port based network access control (802.1x), VLAN (802.1q ) to segregate and secure network traffic, Radius centralized password management, SNMPv3 encrypted authentication and access security |
| Software Features |
STP/RSTP (IEEE 802.1D/w), Redundant Ring (O-Ring) with recovery time less than 30ms over 250 units, TOS/Diffserv supported, Quality of Service (802.1p) for real-time traffic, VLAN (802.1Q) with VLAN tagging and GVRP supported, IGMP Snooping for multicast filtering, Port configuration, Port status, Port statistics, Port monitoring, Port security, Modbus TCP |
| Network Redundancy |
O-Ring, Open-Ring, O-Chain, MRP, MSTP (RSTP/STP compatible) |
| LED Indicators | |
| Power Indicator (PWR) Green | Power LED x 3 |
| Ring Master indicator | Green - indicates system operated in O-Ring Master mode |
| Ring Indicator |
Green - Indicates that the system operating in O-Ring mode, Green Blinking - Indicates that the Ring is broken. |
| Fault indicator | Amber - Indicates unexpected event occurred |
| 100/1000Base-X SFP Port Indicator | Green for port Link/Act. |
| 10/100/1000TX RJ45 port indicator | Dual color LED - Green for 1000Mbps Link/Act indicator. Amber for 10/100Mbps Link/Act indicator |
| PoE indicator | Green - PoE enabled LED x 8 |
| Power | |
| Input power | Dual DC inputs. 12 ~ 57VDC on 6-pin terminal block |
| Power consumption (typical) | 13.2 Watts (power device not included) |
| PoE Power Output |
12 ~ 24VDC - total power budget is 60Watts with maximum 30Watts per port, 24 ~ 57VDC - total power budget is 120Watts with |
| maximum 30Watts per port | |
| Overload current protection | present |
| Reverse polarity protection | not present |
| Physical Characteristic | |
| Enclosure | IP-30 |
| Dimension (W x D x H) | 54.3 x 120 x 145.1 mm |
| Weight | 924g |
| Environmental | |
| Storage Temperature | -40÷85°C(-40÷185°F) |
| Operating Temperature | -40÷75°C (-40÷158°F) |
| Operating Humidity | 5%÷95% Non-condensing |
| Regulatory approvals | |
| EMI |
FCC Part 15, CISPR (EN55022) class A |
| EMS |
EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11 |
| Shock | IEC60068-2-27 |
| Free Fall | IEC60068-2-32 |
| Vibration | IEC60068-2-6 |
| Network security | IEC 62443-4-2 |
| Safety | EN60950 |
| Warranty | |
| Warranty period | 5 years |
Page 1 of 13
|