MENUPRICE REDUCTIONS
- Measuring Instruments
-
#09348
MM65C - Digital Multimeter with autorange and True RMS
True RMS digital multimeter that has illuminated measurement sockets to avoid incorrect connection of the test leads.Max. LCD display 1999 Range selection manual DC voltage 200m/2/20/200/1000 V ± 0,5%+3 AC voltage 200m/2/20/200/1000 V ± 0,8%+5 DC current 200u/20m/200m/10 A ± 0,8%+3 AC current 200u/20m/200m/10 A ± 2,0%+5 Resistance 200/2k/20k/200k/2M/20M Ω ± 0,8%+3 Capacitance 20n/200n/2u/20u/200u/2m/20m F ± 5,0%+5 Temperature -20÷1000°C ± 1,0%+4 Diode test yes Continuity test yes Auto power off yes Data hold yes Back light yes Incorrect plug protection yes Power 2x 1,5V AA battery
#09349MM65E - Digital Multimeter with autorange and True RMS
True RMS digital multimeter that has illuminated measurement sockets to avoid incorrect connection of the test leads.Max. LCD display 5999 Range selection automatic,
manualDC voltage 600m/6/60/6001000 V ± 0,5%+5 AC voltage 600m/6/60/6001000 V ± 1,2%+5 DC current 600u/6000u/60m/600 mA/10A ± 1,2%+5 AC current 600u/6000u/60m/600 mA/10A ± 1,5%+5 Resistance 600/6k/60k/600k/6M/60M Ω ± 0,8%+5 Capacitance 6n/60n/600n/6u/60u/600u/6m/60m F ± 4,0%+5 Frequency 10/100/1000/10k/100k/1M/10M Hz ± 1,5%+5 Temperature -20÷1000°C ± 1,0%+4 Diode test yes Continuity test yes Relative measurement yes Auto power off yes Data hold yes Back light yes Incorrect plug protection yes Power 2x 1,5V AA battery
-
#03062
Voltage detector NF11B
Alternating voltage detector. In order to use it, put the tester on the wire and if there is voltage on the line, the tip will turn red and a sound will be generated.
Additionaly equipped with a flashlight helping with work in hard-to-reach places.AC voltage 90 - 1000V Insulation class 1000 V,
CAT IVSound alarm yes Diode alarm yes Flashlight yes Power 2x 1,5V AAA battery (not included)
#03086Voltage detector NOYAFA NF-609C
Easy in use alternating voltage detector. In order to use it, put the tester on the wire and if there is voltage on the line, the tip will turn red and a sound will be generated.
Additionaly equipped with a flashlight helping with work in hard-to-reach places.AC voltage 50 - 1000V Insulation class 600V CAT IV,
1000V CAT IIISound alarm yes Diode alarm yes Flashlight yes Adjustable sensitivity yes Power 2x 1,5V AAA battery (not included)
-
#03862
Cable tester for multi-pairs cable (NOYAFA NF-811)
This wire tracker with a cable tester is a small and easy to use tool enabling long distance wiring tracing, patch cable order verifying, wiring voltage inspection.Tested cabling RJ-45,
RJ-11Additional functions flashlight Dimensions Transmitter - 125x45x35 mm,
Receiver - 185x35x23 mmWeight 113g (without batteries) Power supply Transmitter - 9V 6F22,
Receiver - 9V 6F22The set includes:
- a transmitter,
- a receiver,
- RJ45 patchcord,
- a 6p4c cable with crocodille clips,
- earphones
#03055Digital cable tracker WT25C
The cable tracker is made for identifying and searching cables without breaching their insulation.
Thanks to the use of a digital signal, the sound heard in the receiver is free from any kind of interference that occurs when using analog finders.Signal dual alternating tone or digital Output signal level 23V p-p Battery type 2x 6F22 9V The set includes a transmitting and receiving module, a soft case, a RJ45 patchcord and a test lead finished with crocodile clips.
#09347Digital cable tracker and cable tester WT20B
The cable tracker is made for identifying and searching cables without breaching their insulation.
Thanks to the use of a digital signal, the sound heard in the receiver is free from any kind of interference that occurs when using analog finders.
Additionaly, the device enables displaying the network cable connection map and test PoE devices.Cables tested RJ45,
RJ11Performed tests connection map,
crimping quality test (RJ45 and RJ11),
port flash,
PoE tests,
NCV detecorSignal digital Output signal level 15V p-p Battery type 6F22 9V (transmitter),
3.7V 800mAh (toner)The set includes a transmitting and receiving module, a RJ45 patchcord and a test lead finished with crocodile clips.
-
#03071
Mastech MS5902 - Circuit breaker finder and socket tester
Thanks to the Circuit Breaker Finder/Socket Tester (MS5902) it is possible to check which fuse protects the socket without disconnecting the power supply.
The transmitting element can work in two modes: as a signal generator for the receiver and as a socket tester.
#04070Mastech MS6818 - Cable locator
MS6818 is ideal for tracing cables in walls/underground. This device can easily locate fuses and breakers on circuits or find interruptions and short-circuits in cables, for example in floor heating systems. It also easily detects live cables and traces metallic pipes.
The kit includes a transmitter and a reciever.Transmitter Power 6 x 1,5V battery Dimmensions 190 x 89 x 42,5 mm Reciever LCD backlight yes Power 1 x 9V battery Dimmensions 241,5 x 78 x 38,5 mm Manufacturer Mastech Warranty warrantya 1 year
-
#03868
Forehead IR thermometer HT11D
Forehead Infrared Thermometers for non-contact body temperature measurement. The measurement is made from a distance of several centimeters. The device is characterized by high accuracy (0.2 ° C) and fast measurement time (0.5 seconds). It allows for quick and safe detection of increased body temperature.
Additionaly, it can measure the surface temperature of objects, so it can be used as a classic pyrometer.
The device can be used for fast detection of people with increased body temperature, e.g. before entering a shop or office. Initial temperature measurement is possible from a distance of about 1 m. It is also possible to manually calibrate the thermometer readings.
Warning!
The HT11D thermometer is not a medical device.
Always use a clinical thermometer when highly accurate body temperature measurements are required.Measurement range (Body) 32 °C ÷ 42.5°C Measurement range (Surface) 0 °C ÷ 60.0°C Operation temperature range 0°C ÷ 40°C Resolution 0.1 °C Accuracy 0.2 °C Response time 0.5 sec Back light yes Data hold yes Auto power off yes Power 9V 6F22 battery WARNING
Acclimate to room temperature before measurement if it has been stored in a cold or hot environment
-
Page 1 of 2
|
