MENU
#06625
Managed switch, 24x 10/100Base-T(X) RJ45 Ports + 2x 10/100/1000 COMBO Ports with SFP, O/Open-Ring <30ms (ORing RES-P9242GCL-HV)
RES-P9242GCL series are 26-port rack mount managed redundant ring Ethernet switch with 24x10/100Base-T(X) and 2xGigabit Combo ports, SFP socket. These switches are designed for power substation application, and it is fully compliant with the requirement of IEC 61850-3 and IEEE 1613. These switches support Ethernet Redundancy protocol, O-Ring (recovery time < 30ms), O-Chain, MRP*note, Fast Recovery and MSTP (RSTP/STP compatible) can protect your mission-critical applications from network interruptions or temporary malfunctions with its fast recovery technology. RES-P9242GCL series can also be managed centralized and convenient by Open-Vision, as well as the Web-based interface, Telnet and console (CLI) configuration. Therefore, the switch is one of the most reliable choice for highly-managed and Fiber Ethernet application.
| Physical Ports | |
|---|---|
| 10/100Base-T(X) RJ45 Ports | 24 |
| 10/100/1000 COMBO with SFP | 2 |
| RS-232 Serial Console Port | RS-232 in DB-9 connector with console cable (115200bps 8 N 1) |
| Technology | |
| Ethernet Standards |
IEEE 802.3 for 10Base-T, IEEE 802.3u for 100Base-TX, IEEE 802.3ab for 1000Base-T, IEEE 802.3z for 1000Base-X, IEEE 802.3x for Flow control, IEEE 802.3ad for LACP (Link Aggregation Control Protocol ), IEEE 802.1p for COS (Class of Service), IEEE 802.1Q for VLAN Tagging, IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol), IEEE 802.1s for MSTP (Multiple Spanning Tree Protocol), IEEE 802.1x for Authentication, IEEE 802.1AB for LLDP (Link Layer Discovery Protocol), IEEE 802.1D for STP (Spanning Tree Protocol) |
| MAC Table | 8192 MAC addresses |
| Priority Queues | 8 |
| Processing | Store-and-Forward |
| Switching latency | 7 µs |
| Switching bandwidth | 8.8 Gbps |
| Max. Number of Available VLANs | 4096 |
| IGMP multicast groups | 256 for each VLAN |
| Port rate limiting | User Define |
| Security Features |
Device Binding security feature, Enable/disable ports, MAC based port security, Port based network access control (802.1x), VLAN (802.1q ) to segregate and secure network traffic, Radius centralized password management, SNMPv3 encrypted authentication and access security |
| Software Features |
IEEE 802.1D Bridge, auto MAC address learning/aging and MAC address (static), Multiple Registration Protocol (MRP), MSTP (RSTP/STP compatible), Redundant Ring (O-Ring) with recovery time less than 10ms over 250 units , TOS/Diffserv supported, Quality of Service (802.1p) for real-time traffic, VLAN (802.1Q) with VLAN tagging, IGMP v2/v3 Snooping, IP-based bandwidth management, Application-based QoS management, DOS/DDOS auto prevention, Port configuration, status, statistics, monitoring, security, DHCP Server/Client , DHCP Relay, Modbus TCP, SMTP Client, NTP server |
| Network Redundancy |
O-Ring, O-ChainMRP, MSTP (RSTP/STP compatible) |
| LED Indicators | |
| Power / Ready indicator | Green - Ready LED x 2 |
| Ring Master indicator | Green - indicates system operated in O-Ring Master mode |
| O-Ring Indicator (Ring) |
Green - Indicates that the system operating in O-Ring mode, Green Blinking - Indicates that the Ring is broken. |
| 10/100TX RJ45 port indicator |
Green for port Link/Act, Green for speed indicator ~ On for 100Mbps / Off for 10Mbps |
| 10/100/1000TX RJ45 port indicator |
Green for port Link/Act, Green for speed indicator ~ On for 100/1000Mbps / Off for 10Mbps |
| Fiber port indicator | Green for port Link/Act |
| Fault Contact | |
| Relay | Relay output to carry capacity of 1A at 24VDC |
| Power | |
| Input power | Dual 125~370VDC / 100~240VAC power inputs |
| Power consumption (typical) | 19.8W |
| Overload current protection | present |
| Physical Characteristic | |
| Dimension (W x D x H) | 443.7 x 262.7 x 44 mm |
| Weight | 4050g |
| Environmental | |
| Storage Temperature | -40÷85°C(-40÷185°F) |
| Operating Temperature | -40÷85°C (-40÷185°F) |
| Operating Humidity | 5%÷95% Non-condensing |
| Regulatory approvals | |
| EMC |
CE EMC (EN 55024, EN 55032), FCC Part 15 B, IEC 61850/ IEEE1613 |
| EMI |
EN 55032, CISPR32, EN 61000-3-2, EN 61000-3-3, FCC Part 15B class A |
| EMS |
EN 55024 (IEC/EN 61000-4-2 (ESD), IEC/EN 61000-4-3 (RS),IEC/EN 61000-4-4 (EFT), IEC/EN 61000-4-5 (Surge), IEC/EN 61000-4-6 (CS), IEC/EN 61000-4-8(PFMF), IEC/EN 61000-4-11 (DIP)) |
| Shock | IEC60068-2-27 |
| Free Fall | IEC60068-2-31 |
| Vibration | IEC60068-2-6 |
| Safety | EN60950-1 |
| Other | IEC 61850/ IEEE1613 |
| Network security | IEC 62443-4-2 |
| MTBF | 262,968 hrs |
| Warranty | |
| Warranty period | 5 years |
#06658
Unmanaged switch, 4x 100/1G/2.5G RJ-45 + 2x1000/10G SFP+ (ORing IDGS-C1042GP+)
IDGS-C1042GP+ is unmanaged Ethernet Switch with 4x10/100/1000/25000Base-T(X) ports with 2x1G/10GBase-X SFP ports
and extended operating temperature range from -40℃ to 75℃ for the harsh environments. Therefore, the switch is one of
the most reliable choices for rolling stock and highly unmanaged Ethernet application.
and extended operating temperature range from -40℃ to 75℃ for the harsh environments. Therefore, the switch is one of
the most reliable choices for rolling stock and highly unmanaged Ethernet application.
| Physical Ports | |
|---|---|
| 10/100/1000/2500 Base-T(X) Ports in RJ45 Auto MDI/MDIX | 4 |
| 1000/10GBase-X, SFP+ ports | 2 |
| Technology | |
| Ethernet Standards |
IEEE 802.3 for 10Base-T, IEEE 802.3u for 100Base-TX, IEEE 802.3ab for 1000Base-T, IEEE 802.3z for 1000Base-X, IEEE 802.3bz for 2.5GBaseT, IEEE 802.3ae for 10G SFP+, IEEE 802.3x for Flow control |
| MAC Table | 8192 MAC addresses |
| Processing | Store-and-Forward |
| Switching latency | 10 µs |
| Switching bandwidth | 60 Gbps |
| Power | |
| Input power | Dual DC inputs. 12÷48VDC on 4-pin terminal block |
| Power consumption (typical) | 10W |
| Overload current protection | present |
| Physical Characteristic | |
| Enclosure | IP-40 |
| Dimension (W x D x H) | 28mm x 88mm x 130mm |
| Environmental | |
| Storage Temperature | -40÷85°C(-40÷185°F) |
| Operating Temperature | -40÷75°C (-14÷163°F) |
| Operating Humidity | 5%÷95% Non-condensing |
| Regulatory approvals | |
| EMC |
CE EMC (EN 55035, EN 55032), FCC Part 15 B |
| Shock | IEC60068-2-27 |
| Free Fall | IEC60068-2-31 |
| Vibration | IEC60068-2-6 |
| Safety | EN 62368-1 (LVD) |
| Warranty | |
| Warranty period | 5 years |
#06879
Unmanaged switch, 4x 10/1000 RJ-45 + 1x 1000 SFP , slim housing (ORing IGS-1041GPA)
IGS-1050A/IGS-1041GPA series are unmanaged gigabit Ethernet switches with 5 x 10/100/1000Base-T(X) ports or 4 x 10/100/1000Base-T(X) and 1 x 1000Base-X SFP ports. IGS-1050A/IGS-1041GPA series support redundant power inputs, rigid IP-30 housing and have DIP switches for enabling or disabling relay output alarm. In addition, the wide operating temperature range from -40 to 70°C can satisfy most of operating environment.
| Physical Ports | |
|---|---|
| 10/100/1000 Base-T(X) Ports in RJ45 Auto MDI/MDIX | 4 |
| 1000Base-X SFP Ports | 1 |
| Technology | |
| Ethernet Standards |
IEEE 802.3 for 10BaseT, IEEE 802.3u for 100BaseT(X) and 100BaseFX,, IEEE 802.3z for 1000Base-X, IEEE 802.3x for Flow control |
| MAC Table | 1024 MAC addresses |
| Processing | Store-and-Forward |
| LED Indicators | |
| Power indicator | Green - Power LED x 2 |
| Fault indicator | Amber - Indicate PWR1 or PWR2 failure |
| 10/100/1000TX RJ45 port Indicator |
Green on only for 1000Mbit, Green and Amber on for 100Mbit, Amber on only for 10Mbit |
| 1000X SFP port Indicator | Green for port Link/Act |
| Fault contact | |
| Relay | Relay output to carry capacity of 1A at 24VDC |
| Power | |
| Input power | Dual DC inputs. 12÷48VDC on 6-pin terminal block |
| Power consumption (typical) | 5.5W |
| Overload current protection | present |
| Reverse polarity protection | present on terminal block |
| Physical Characteristic | |
| Enclosure | IP-30 |
| Dimension (W x D x H) | 26.1mm x 94.9m x 144.3mm |
| Weight | 403g |
| Environmental | |
| Storage Temperature | -40÷85°C (-40÷185°F) |
| Operating Temperature | -10÷60°C (-40÷158°F) |
| Operating Humidity | 5%÷95% Non-condensing |
| Regulatory approvals | |
| EMI |
FCC Part 15, CISPR (EN55022) class A |
| EMS |
EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11 |
| Shock | IEC60068-2-27 |
| Free Fall | IEC60068-2-32 |
| Vibration | IEC60068-2-6 |
| Safety | EN60950 |
| Warranty | |
| Warranty period | 5 years |
#07960
Unmanaged switch, 4x 10/1000 RJ-45 + 2x 1000 SFP, slim housing (ORing IGS-1042GPA)
IGS-1042GPA is an unmanaged Ethernet switch. IGS-1042GPA has 4x10/100/1000Base-T(X) and 2x100/1000Base-X SFP port. The SFP port optical network speed can be set by changing the settings of the DIP-Switch below. IGS-1042GPA supports wide range 12~48VDC power inputs. The wide operating temperature range from -40oC to 70oC can satisfy most of operating environment. Therefore, the switch is one of the most reliable choices for Ethernet application.
| Physical Ports | |
|---|---|
| 10/100/1000 Base-T(X) Ports in RJ45 Auto MDI/MDIX | 4 |
| 100/1000Base-X SFP Ports | 2 |
| Technology | |
| Ethernet Standards |
IEEE 802.3 for 10BaseT, IEEE 802.3u for 100BaseT(X) and 100BaseFX,, IEEE 802.3z for 1000Base-X, IEEE 802.3x for Flow control |
| MAC Table | 1024 MAC addresses |
| Processing | Store-and-Forward |
| LED Indicators | |
| Power indicator | Green - Power LED x 2 |
| Fault indicator | Amber - Indicate PWR1 or PWR2 failure |
| 10/100/1000TX RJ45 port Indicator |
Green on only for 1000Mbit, Green and Amber on for 100Mbit, Amber on only for 10Mbit |
| 1000X SFP port Indicator | Green for port Link/Act |
| Fault contact | |
| Relay | Relay output to carry capacity of 1A at 24VDC |
| Power | |
| Input power | Dual DC inputs. 12÷48VDC on 6-pin terminal block |
| Power consumption (typical) | 6.4W |
| Overload current protection | present |
| Reverse polarity protection | present on terminal block |
| Physical Characteristic | |
| Enclosure | IP-30 |
| Dimension (W x D x H) | 26.1mm x 94.9m x 144.3mm |
| Weight | 410g |
| Environmental | |
| Storage Temperature | -40÷85°C (-40÷185°F) |
| Operating Temperature | -40÷70°C (-40÷158°F) |
| Operating Humidity | 5%÷95% Non-condensing |
| Regulatory approvals | |
| EMI |
FCC Part 15, CISPR (EN55022) class A |
| EMS |
EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11 |
| Shock | IEC60068-2-27 |
| Free Fall | IEC60068-2-32 |
| Vibration | IEC60068-2-6 |
| Safety | EN60950 |
| Warranty | |
| Warranty period | 5 years |
#07667
Unmanaged industrial switch, 5x 10/1000 RJ-45 (Wave Industrial WO-IS-M5GT)
| Physical Ports | |
|---|---|
| 100/1000 Base-T(X) Ports in RJ45 Auto MDI/MDIX | 5 |
| Technology | |
| Ethernet Standards |
IEEE 802.3u for 100Base-TX and 100Base-FX, IEEE 802.3ab for 1000Base-T, IEEE 802.3z for 1000Base-X |
| LED Indicators |
power, RJ45 ports (5) |
| Power | Dual DC inputs. 9÷48VDC on 4-pin terminal block |
| Power consumption (typical) | 5.8W |
| Physical Characteristic | |
| Enclosure | IP-40 |
| Dimension (W x H x D) | 33mm x 115mm x 85mm |
| Weight | 330g |
| Environmental | |
| Storage Temperature | -40÷85°C |
| Operating Temperature | -40÷85°C |
| Operating Humidity | 5%÷95% Non-condensing |
| Regulatory approvals | |
| EMI |
FCC Part 15, CISPR (EN55022) class A, EN50155 (EN50121-3-2, EN55011, EN50121-4) |
| EMS |
EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11 |
| Shock | IEC60068-2-27 |
| Free Fall | IEC60068-2-32 |
| Vibration | IEC60068-2-6 |
| Safety | EN60950-1 |
| Warranty | |
| Warranty period | 5 years |
#06613
Unmanaged switch, 5x 10/100/1000 RJ-45, slim housing (ORing IGS-C1050)
| Physical Ports | |
|---|---|
| 10/100/1000 Base-T(X) Ports in RJ45 Auto MDI/MDIX | 5 |
| Technology | |
| Ethernet Standards |
IEEE 802.3 for 10BaseT, IEEE 802.3u for 100BaseT(X), IEEE 802.3x for Flow control |
| MAC Table | 2048 MAC addresses |
| Processing | Store-and-Forward |
| LED Indicators | |
| Power indicator | Green - Power LED x 2 |
| Fault indicator | Yellow - Indicate PWR1 or PWR2 failure |
| 10/100TX RJ45 port indicator |
Green for port Link/Act, Yellow for Duplex/Collision |
| Fault contact | |
| Relay | Relay output to carry capacity of 1A at 24VDC |
| Power | |
| Input power | Dual DC inputs. 12÷48VDC on 4-pin terminal block |
| Power consumption (typical) | 3W |
| Overload current protection | present |
| Reverse polarity protection | present on terminal block |
| Physical Characteristic | |
| Enclosure | IP-30 |
| Dimension (W x D x H) | 26mm x 64mm x 103mm |
| Environmental | |
| Storage Temperature | -10÷60°C |
| Operating Temperature | -10÷60°C |
| Operating Humidity | 5%÷95% Non-condensing |
| Regulatory approvals | |
| EMI |
FCC Part 15, CISPR (EN55022) class A |
| EMS |
EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11 |
| Shock | IEC60068-2-27 |
| Free Fall | IEC60068-2-32 |
| Vibration | IEC60068-2-6 |
| Safety | EN60950 |
| Warranty | |
| Warranty period | 5 years |
#06878
Unmanaged switch, 5x 10/1000 RJ-45, slim housing (ORing IGS-1050A)
IGS-1050A/IGS-1041GPA series are unmanaged gigabit Ethernet switches with 5 x 10/100/1000Base-T(X) ports or 4 x 10/100/1000Base-T(X) and 1 x 1000Base-X SFP ports. IGS-1050A/IGS-1041GPA series support redundant power inputs, rigid IP-30 housing and have DIP switches for enabling or disabling relay output alarm. In addition, the wide operating temperature range from -40 to 70°C can satisfy most of operating environment.
| Physical Ports | |
|---|---|
| 10/100/1000 Base-T(X) Ports in RJ45 Auto MDI/MDIX | 5 |
| Technology | |
| Ethernet Standards |
IEEE 802.3 for 10BaseT, IEEE 802.3u for 100BaseT(X), IEEE 802.3ab for 1000Base-T, IEEE 802.3x for Flow control |
| MAC Table | 1024 MAC addresses |
| Processing | Store-and-Forward |
| LED Indicators | |
| Power indicator | Green - Power LED x 2 |
| Fault indicator | Amber - Indicate PWR1 or PWR2 failure |
| 10/100/1000TX RJ45 port Indicator |
Green on only for 1000Mbit, Green and Amber on for 100Mbit, Amber on only for 10Mbit |
| Fault contact | |
| Relay | Relay output to carry capacity of 1A at 24VDC |
| Power | |
| Input power | Dual DC inputs. 12÷48VDC on 6-pin terminal block |
| Power consumption (typical) | 5.5W |
| Overload current protection | present |
| Reverse polarity protection | present on terminal block |
| Physical Characteristic | |
| Enclosure | IP-30 |
| Dimension (W x D x H) | 26.1mm x 94.9mm x 144.3mm |
| Weight | 420g |
| Environmental | |
| Storage Temperature | -40÷85°C (-40÷185°F) |
| Operating Temperature | -40÷70°C (-40÷158°F) |
| Operating Humidity | 5%÷95% Non-condensing |
| Regulatory approvals | |
| EMI |
FCC Part 15, CISPR (EN55022) class A |
| EMS |
EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11 |
| Shock | IEC60068-2-27 |
| Free Fall | IEC60068-2-32 |
| Vibration | IEC60068-2-6 |
| Safety | EN60950 |
| Warranty | |
| Warranty period | 5 years |
#07959
Unmanaged switch, 5x 10/1000 RJ-45, slim housing (ORing IGS-150B)
IGS-150B is a mini type unmanaged full gigabit Ethernet switch with 5 x 10/100/1000Base-T(X) ports. IGS-150B supports redundant power input and rigid mini size IP-30 housing. In addition, the wide operating temperature range from -40oC to 70oC can satisfy most of operating environment.
| Physical Ports | |
|---|---|
| 10/100/1000 Base-T(X) Ports in RJ45 Auto MDI/MDIX | 5 |
| Technology | |
| Ethernet Standards |
IEEE 802.3 for 10BaseT, IEEE 802.3u for 100BaseT(X), IEEE 802.3x for Flow control, IEEE 802.3ab for 1000Base-T |
| MAC Table | 4096 MAC addresses |
| Processing | Store-and-Forward |
| LED Indicators | |
| Power indicator | Green - Power LED x 2 |
| 10/100T/1000X RJ45 port indicator |
Up Green LED for Link/Act indicator, Down dual color LED for speed indicator Green - 1000Mbps, Amber - 100Mbps, Off - 10Mbps |
| Fault contact | |
| Relay | Relay output to carry capacity of 1A at 24VDC |
| Power | |
| Input power | Dual DC inputs. 12÷48VDC on 4-pin terminal block |
| Power consumption (typical) | 3.2W |
| Overload current protection | present |
| Reverse polarity protection | present |
| Physical Characteristic | |
| Enclosure | IP-30 |
| Dimension (W x D x H) | 26.1mm x 70mm x 95mm |
| Weight | 222g |
| Environmental | |
| Storage Temperature | -40÷85°C (-40÷185°F) |
| Operating Temperature | -40÷70°C (-40÷158°F) |
| Operating Humidity | 5%÷95% Non-condensing |
| Regulatory approvals | |
| EMI |
FCC Part 15, CISPR (EN55022) class A |
| EMS |
EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11 |
| Shock | IEC60068-2-27 |
| Free Fall | IEC60068-2-32 |
| Vibration | IEC60068-2-6 |
| Safety | EN60950 |
| Warranty | |
| Warranty period | 5 years |
Call#08431
Unmanaged switch, 4x 10/100/1000 RJ-45, Gigabit Ethernet, PCIe slot (ORing IGCS-E140)
IGCS-E140 is an PCI-Express unmanaged Gigabit Ethernet switch card. The Ethernet switch card is a high performance LAN controller. IGCS-E140 provided 4x10/100/1000Base-T(X) auto MDI/MDIX Ethernet ports. IGCS-E140 could be installed on any IPC motherboard with PCIe socket to make the IPC/embedded system able to communication with other Ethernet devices. The IGCS-E140's full bandwidth capability boasts a robust 1000Mbps capability through the PCI-Express bus architecture. IGCS-E140 no need to purchase a new switch or broadband router because the auto-negotiation feature works with your existing switch, broadband router, or hub to provide the highest network speed available. The automatic full duplex capability further increases bandwidth and eliminates packet collisions by allowing data to flow in both directions at the same time. Therefore, IGCS-E140 is the best solution to IPC/embedded system to feature Ethernet network.
| Physical Ports | |
|---|---|
| 10/100/1000 Base-T(X) Ports in RJ45 Auto MDI/MDIX | 4 |
| Technology | |
| Ethernet Standards |
IEEE 802.3 for 10Base-T, IEEE 802.3u for 100Base-TX, IEEE 802.3ab for 1000Base-T, IEEE 802.3x for Flow control |
| MAC Table | 8192 MAC addresses |
| Processing | Store-and-Forward |
| LED Indicators | |
| Power indicator | Green - Power LED x 1 |
| 10/100TX RJ45 port indicator | Green for port Link/Act. Amber for Collision/Duplex indicator |
| Power | |
| Input power | PCIe bus powered |
| Power consumption (typical) | 4,2W |
| Overload current protection | present |
| Physical Characteristic | |
| Dimension (WxDxH) | 21.3mm x 136mm x 121mm |
| Weight | 98g |
| Environmental | |
| Storage Temperature | -40÷85°C (-40÷185°F) |
| Operating Temperature | -10÷60°C (14÷140°F) |
| Operating Humidity | 5%÷95% Non-condensing |
| Regulatory approvals | |
| EMI |
FCC Part 15, CISPR (EN55022) class A |
| EMS |
EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11 |
| Shock | IEC60068-2-27 |
| Free Fall | IEC60068-2-32 |
| Vibration | IEC60068-2-6 |
| Operating System Supports | |
| Microsoft System | DOS / Win98 / WinMe / WinXP / Win2000 / WinServer2003 / Vista / WinServer 2008 / Win7 / Win8 |
| Unix (Linux) |
Linux for Kernel 3.x / 2.6.x / 2.4.x, FreeBSD for 7.x / 8.0, SCO OpenServer for 6 / UnixWare 7.1.x |
| Novell | Novell client for DOS (ODI driver) / Novell server driver (Support OS 5.x and 6.x) |
| Others | MacOS 10.4 / 10.5 / 10.6 / 10.7 |
| Warranty | |
| Warranty period | 5 years |
#07666
Unmanaged switch, 4x 10/1000 RJ-45 + 2x 1000 SFP (Wave Industrial WO-IS-2GF4GC)
WO-IS-2GF4GC is an industrial Ethernet switch with extended temperature ranges developed by Wave Optics to fulfill needs in industries including
smart traffic, expressways, smart cities, safe cities, new energy, smart manufacturing, and so on. The two Gigabit fiber port and four Gigabit copper ports provide a high packet forwarding rate and an ample back plane bandwidth, making the transmission of images clear and smooth.
Having an IP40 rated aluminum enclosure, a rail base designed to withstand severe vibration, and good EMC electromagnetic compatibility, this series of product is capable of working stably and reliably in extreme-temperature (-40°C to 85°C) and rugged industrial environments.
smart traffic, expressways, smart cities, safe cities, new energy, smart manufacturing, and so on. The two Gigabit fiber port and four Gigabit copper ports provide a high packet forwarding rate and an ample back plane bandwidth, making the transmission of images clear and smooth.
Having an IP40 rated aluminum enclosure, a rail base designed to withstand severe vibration, and good EMC electromagnetic compatibility, this series of product is capable of working stably and reliably in extreme-temperature (-40°C to 85°C) and rugged industrial environments.
| Physical Ports | |
|---|---|
| 10/100/1000 Base-T(X) Ports in RJ45 Auto MDI/MDIX | 4 |
| 100/1000Base-X SFP Ports | 2 |
| Technology | |
| Ethernet Standards |
IEEE 802.3 for 10BaseT, IEEE 802.3u for 100BaseT(X), IEEE 802.3z for 1000Base-X |
| MAC Table | 2048 MAC addresses |
| Power | |
| Input power | Dual DC inputs. 9÷48VDC on 5-pin terminal block |
| Power consumption (typical) | 6W |
| Physical Characteristic | |
| Enclosure | IP-40 |
| Dimension (W x D x H) | 37mm x 85m x 116mm |
| Weight | 430g |
| Environmental | |
| Storage Temperature | -40÷85°C (-40÷185°F) |
| Operating Temperature | -40÷85°C (-40÷185°F) |
| Operating Humidity | 5%÷95% Non-condensing |
| Regulatory approvals | |
| EMS |
IEC61000-4-2(ESD) level 4, IEC 61000-4-4 (EFT) level 4, IEC61000-4-5(Surge) level 4 |
| Shock | IEC60068-2-27 |
| Free Fall | IEC60068-2-32 |
| Vibration | IEC60068-2-6 |
| MTBF | 500000h |
Page 8 of 12
|
