MENU
#07018
Wireless access point Ubiquiti NanoBeam M5 (Ubiquiti NBE-5AC-Gen2)
| Standards | IEEE 802.11ac/n |
|---|---|
| Ports | 2x 10/100/1000 Mbps RJ-45 |
| Chipset |
Atheros MIPS 74Kc, 720 MHz |
| Operating memory | 128 MB DDR2 |
| Flash memory | 8 MB |
| Antenna |
build-in, 19 dBi |
| VSWR | 1.5 |
| Dimensions | 189 x 189 x 125 mm |
| Weight | 0.530 kg |
| Mounting | mast or wall with the aid of antenna wall support |
| Max. power consumption | 8.5 W |
| Power | PoE 24V 0.5A Gigabit PoE Adapter (Included) |
| Operating temperatures | -40°C ÷ 80°C |
| Operating humidity |
5% ÷ 95%, Non-condensing |
| Wind Loading | 45.4 N @ 200 km/h (10.2 lbf @ 125 mph) |
| Wind Survivability | 200 km/h (125 mph) |
| ESD/EMP Protection Air |
± 24 kV, Contact ± 24 kV |
| Certifications |
CE, FCC, IC |
| RoHS Compliance | Yes |
| Salt Fog Test |
IEC 68-2-11 (ASTM B117), Equivalent MIL-STD-810 G Method 509.5 |
| Vibration Test | IEC 68-2-6 |
| Temperature Shock Test | IEC 68-2-14 |
| UV Test |
IEC 68-2-5 at 40° C (104° F), Equivalent ETS 300 019-1-4 |
| Wind-Driven Rain Test |
ETS 300 019-1-4, Equivalent MIL-STD-810 G Method 506.5 |
| Manufacturer | Ubiquiti |
#07004
Wireless Access Point Ubiquiti NanoStation 5 AC (Ubiquiti NS-5AC)
| Ports | 2x 10/100/1000 Mbps RJ-45 |
|---|---|
| Chipset |
Atheros MIPS 74Kc, 560 MHz |
| Operating memory | 64 MB DDR2 |
| Frequency range | 5150 MHz ÷ 5875 MHz |
| VSWR | 1.6 |
| Beam width | 45° |
| Dimensions | 257 x 84 x 41 mm |
| Weight | 233 g |
| Mounting | Pole-Mount (Kit Included) |
| Max. power consumption | 8,5 W |
| Power |
802.3af Alternative A (Pairs 1, 2+; 3, 6 Return), 24V Passive PoE (Pairs 4, 5+; 7, 8 Return) |
| Operating temperatures | -40°C ÷ 70°C |
| Operating humidity |
5% ÷ 95%, non-condensing |
| Certificates |
CE, FCC, IC |
| Manufacturer | Ubiquiti |
#07005
Wireless Access Point Ubiquiti NanoStation AC Loco (Ubiquiti NS-5ACL)
| Ports | 10/100/1000 Mbps RJ-45 |
|---|---|
| Chipset |
Atheros MIPS 74Kc, 560 MHz |
| Operating memory | 64 MB DDR2 |
| Frequency range | 5150 MHz ÷ 5875 MHz |
| VSWR | 1.8 |
| Beam width | 45° |
| Dimensions | 179 x 77.5 x 59.1 mm |
| Weight | 180 g |
| Mounting | Pole-Mount (Kit Included) |
| Max. power consumption | 8,5 W |
| Power |
24V, 0.5A Gigabit PoE Supply (The product is delivered without a power adapter) |
| Operating temperatures | -40°C ÷ 70°C |
| Operating humidity |
5% ÷ 95%, non-condensing |
| Certificates |
CE, FCC, IC |
| Manufacturer | Ubiquiti |
#07072 PoE 802.3af Adapter, POE-24-24W-G
#07039
Wireless Access Point Ubiquiti NanoStation AC Loco 5-pack (Ubiquiti NS-5ACL)
| Ports | 10/100/1000 Mbps RJ-45 |
|---|---|
| Chipset |
Atheros MIPS 74Kc, 560 MHz |
| Operating memory | 64 MB DDR2 |
| Frequency range | 5150 MHz ÷ 5875 MHz |
| VSWR | 1.8 |
| Beam width | 45° |
| Dimensions | 179 x 77.5 x 59.1 mm |
| Weight | 180 g |
| Mounting | Pole-Mount (Kit Included) |
| Max. power consumption | 8,5 W |
| Power |
24V, 0.5A Gigabit PoE Supply (The product is delivered without a power adapter) |
| Operating temperatures | -40°C ÷ 70°C |
| Operating humidity |
5% ÷ 95%, non-condensing |
| Certificates |
CE, FCC, IC |
| Manufacturer | Ubiquiti |
#07072 PoE 802.3af Adapter, POE-24-24W-G
#05349
Wireless Access Point Ubiquiti UniFi UAP AC M PRO, AC Mesh; (Ubiquiti UAP-AC-M-PRO)
| Networking Interface (Mbps) | 2 x 10/100/1000 Ethernet Ports |
|---|---|
| Buttons | Reset |
| Antennas | 3x Internal Dual-Band Antennas (8 dBi) |
| Wi-Fi Standards | 802.11 a/b/g/n/ac |
| Power Method | 802.3af PoE (Supported Voltage Range- 44 to 57VDC) |
| Power Supply |
48V, 0.5A Gigabit PoE Adapter |
| Maximum Power Consumption | 9 W |
| Maximum TX Power | 22 dBm |
| BSSID | Up to 8 per Radio |
| Dimensions | 343.2 x 181.2 x 60.2 mm |
| Weight | 633 g |
| Power Save | Supported |
| Wireless Security |
WEP, WPA-PSK, WPA-Enterprise (WPA/WPA2, TKIP/AES) |
| Certifications |
CE, FCC, IC |
| Mounting | Wall/Ceiling (Kits Included) |
| Operating Temperature | -40 ÷ 70° C |
| Operating Humidity | 5 ÷ 95% Condensing |
| Advanced Traffic Management | |
| VLAN | 802.1Q |
| Advanced QoS | Per-User Rate Limiting |
| Guest traffic isolation | Supported |
| WMM |
Voice, Video, Best Effort, and Background |
| Concurrent Clients | 250+ |
| Supported Data Rates (Mbps) | |
| 802.11ac |
6.5 Mbps to 1300 Mbps (MCS0 - MCS9 NSS1/2, VHT 20/40/80) |
| 802.11n |
6.5 Mbps to 400 Mbps (MCS0 - MCS15, HT 20/40) |
| 802.11a | 6, 9, 12, 18, 24, 36, 48, 54 Mbps |
| 802.11g | 6, 9, 12, 18, 24, 36, 48, 54 Mbps |
| 802.11b | 1, 2, 5.5, 11 Mbps |
| Manufacturer | Ubiquiti |
#05348
Wireless Access Point Ubiquiti UniFi UAP AC M, AC Mesh; (Ubiquiti UAP-AC-M)
| Networking Interface (Mbps) | 1 x 10/100/1000 Ethernet Ports |
|---|---|
| Buttons | Reset |
| Antennas |
2x External Dual-Band Omni Antennas (3 dBi, 4 dBi) |
| Wi-Fi Standards | 802.11 a/b/g/n/ac |
| Power Method |
24V Passive PoE (Pairs 4, 5+; 7, 8 Return); 802.3af Alternative A (Pairs 1, 2+; 3, 6 Return), (Supported Voltage Range- 44 to 57VDC) |
| Power Supply |
24V, 0.5A Gigabit PoE Adapter |
| Maximum Power Consumption | 8,5 W |
| Maximum TX Power | 20 dBm |
| BSSID | Up to 8 per Radio |
| Dimensions | 353 x 46 x 34.4 mm |
| Weight | 152 g with Antennas |
| Power Save | Supported |
| Wireless Security |
WEP, WPA-PSK, WPA-Enterprise (WPA/WPA2, TKIP/AES) |
| Certifications |
CE, FCC, IC |
| Mounting | Wall/Ceiling (Kits Included) |
| Operating Temperature | -30 ÷ 70° C |
| Operating Humidity | 5 ÷ 95% Condensing |
| Advanced Traffic Management | |
| VLAN | 802.1Q |
| Advanced QoS | Per-User Rate Limiting |
| Guest traffic isolation | Supported |
| WMM |
Voice, Video, Best Effort, and Background |
| Concurrent Clients | 250+ |
| Supported Data Rates (Mbps) | |
| 802.11ac |
6.5 Mbps to 867 Mbps (MCS0 - MCS9 NSS1/2, VHT 20/40/80) |
| 802.11n |
6.5 Mbps to 300 Mbps (MCS0 - MCS15, HT 20/40) |
| 802.11a | 6, 9, 12, 18, 24, 36, 48, 54 Mbps |
| 802.11g | 6, 9, 12, 18, 24, 36, 48, 54 Mbps |
| 802.11b | 1, 2, 5.5, 11 Mbps |
| Manufacturer | Ubiquiti |
#05352
Wireless Access Point UniFi UAP AC Lite (Ubiquiti UAP-AC-Lite)
| Networking Interface (Mbps) | 1 x 10/100/1000 Ethernet Ports |
|---|---|
| Buttons | Reset |
| Antennas |
(1) Dual-Band Antenna, Tri-Polarity, 2.4 GHz- 3 dBi, 5 GHz- 3 dBi |
| Wi-Fi Standards | 802.11 a/b/g/n/ac |
| Power Method |
Passive Power over Ethernet (24V), 802.3af Supported |
| Power Supply |
24V, 0.5A PoE Adapter (Included) |
| Maximum Power Consumption | 6.5 W |
| Maximum TX Power |
2.4 GHz - 20 dBm, 5 GHz - 20 dBm |
| BSSID | Up to 8 Per Radio |
| Dimensions | 160 x 160 x 31.45 mm (6.30 x 6.30 x 1.24") |
| Weight | 170 g (185 g with Mounting Kits) |
| Power Save | Supported |
| Wireless Security |
WEP, WPA-PSK, WPA-Enterprise (WPA/WPA2, TKIP/AES) |
| Certifications |
CE, FCC, IC |
| Mounting | Wall/Ceiling (Kits Included) |
| Operating Temperature | -10 ÷ 70° C |
| Operating Humidity | 5 ÷ 95% Condensing |
| Advanced Traffic Management | |
| VLAN | 802.1Q |
| Advanced QoS | Per-User Rate Limiting |
| Guest traffic isolation | Supported |
| WMM |
Voice, Video, Best Effort, and Background |
| Concurrent Clients | 250+ |
| Supported Data Rates (Mbps) | |
| 802.11a | 6, 9, 12, 18, 24, 36, 48, 54 Mbps |
| 802.11n |
6.5 Mbps to 300 Mbps (MCS0 - MCS23, HT 20/40) |
| 802.11ac |
6.5 Mbps to 867 Mbps (MCS0 - MCS9 NSS1/2, VHT 20/40/80) |
| 802.11b | 1, 2, 5.5, 11 Mbps |
| 802.11g | 6, 9, 12, 18, 24, 36, 48, 54 Mbps |
| Manufacturer | Ubiquiti |
#08871
Wireless Access Point UniFi UAP AC LR (Ubiquiti UAP-AC-LR)
Ideal for long-range deployments, the UniFi AC LR AP offers simultaneous, dual-band operation with 3x3 MIMO in the 2.4 GHz band and 2x2 MIMO in the 5 GHz band.
The innovative antenna design provides a long-range, symmetrical-link coverage area, and the antenna gain of the UniFi AC LR AP performs better than one-way, high
transmit power does for connecting distant clients.
The innovative antenna design provides a long-range, symmetrical-link coverage area, and the antenna gain of the UniFi AC LR AP performs better than one-way, high
transmit power does for connecting distant clients.
| Networking Interface (Mbps) | 1 x 10/100/1000 Ethernet Ports |
|---|---|
| Buttons | Reset |
| Antennas |
(1) Dual-Band Antenna, Tri-Polarity, 2.4 GHz- 3 dBi, 5 GHz- 3 dBi |
| Wi-Fi Standards | 802.11 a/b/g/n/ac |
| Power Method |
Passive Power over Ethernet (24V), 802.3af Supported |
| Power Supply |
24V, 0.5A PoE Adapter (Included) |
| Maximum Power Consumption | 6.5 W |
| Maximum TX Power |
2.4 GHz - 30 dBm, 5 GHz - 22 dBm |
| BSSID | Up to Four Per Radio |
| Dimensions | 175.7 x 175.7 x 43.2 mm (6.92 x 6.92 x 1.70") |
| Weight | 240 g (315 g with Mounting Kits) |
| Power Save | Supported |
| Wireless Security |
WEP, WPA-PSK, WPA-Enterprise (WPA/WPA2, TKIP/AES) |
| Certifications |
CE, FCC, IC |
| Mounting | Wall/Ceiling (Kits Included) |
| Operating Temperature | -10 ÷ 70° C |
| Operating Humidity | 5 ÷ 95% Condensing |
| Advanced Traffic Management | |
| VLAN | 802.1Q |
| Advanced QoS | Per-User Rate Limiting |
| Guest traffic isolation | Supported |
| WMM |
Voice, Video, Best Effort, and Background |
| Concurrent Clients | 200+ |
| Supported Data Rates (Mbps) | |
| 802.11a | 6, 9, 12, 18, 24, 36, 48, 54 Mbps |
| 802.11n |
6.5 Mbps to 450 Mbps (MCS0 - MCS23, HT 20/40) |
| 802.11ac |
6.5 Mbps to 867 Mbps (MCS0 - MCS9 NSS1/2, VHT 20/40/80) |
| 802.11b | 1, 2, 5.5, 11 Mbps |
| 802.11g | 6, 9, 12, 18, 24, 36, 48, 54 Mbps |
| Manufacturer | Ubiquiti |
#08352
Wireless Access Point UniFi UAP AC PRO (Ubiquiti UAP-AC-PRO)
| Ports |
2 x 10/100/1000 Ethernet Ports, , 1x USB 2.0 Port |
|---|---|
| Buttons | Reset |
| Antennas |
(3) Dual-Band Antennas, 2.4 GHz- 3 dBi, 5 GHz- 3 dBi |
| Wi-Fi Standards | 802.11 a/b/g/n/ac |
| Power Method |
Passive Power over Ethernet (48V), 802.3af/at Supported |
| Power Supply |
48V, 0.5A PoE Adapter (Included) |
| Maximum Power Consumption | 9 W |
| Maximum TX Power |
2.4 GHz - 22 dBm, 5 GHz - 22 dBm |
| BSSID | Up to 8 Per Radio |
| Dimensions | 196.7 x 196.7 x 35 mm (7.74 x 7.74 x 1.38") |
| Weight | 350 g (450 g with Mounting Kits) |
| Power Save | Supported |
| Wireless Security |
WEP, WPA-PSK, WPA-Enterprise (WPA/WPA2, TKIP/AES) |
| Certifications |
CE, FCC, IC |
| Mounting | Wall/Ceiling (Kits Included) |
| Operating Temperature | -10 ÷ 70° C |
| Operating Humidity | 5 ÷ 95% Condensing |
| Advanced Traffic Management | |
| VLAN | 802.1Q |
| Advanced QoS | Per-User Rate Limiting |
| Guest traffic isolation | Supported |
| WMM |
Voice, Video, Best Effort, and Background |
| Concurrent Clients | 250+ |
| Supported Data Rates (Mbps) | |
| 802.11a | 6, 9, 12, 18, 24, 36, 48, 54 Mbps |
| 802.11n |
6.5 Mbps to 450 Mbps (MCS0 - MCS23, HT 20/40) |
| 802.11ac |
6.5 Mbps to 1300 Mbps (MCS0 - MCS9 NSS1/2/3, VHT 20/40/80) |
| 802.11b | 1, 2, 5.5, 11 Mbps |
| 802.11g | 6, 9, 12, 18, 24, 36, 48, 54 Mbps |
| Manufacturer | Ubiquiti |
#05356
Wireless Access Point UniFi UAP-AC-HD (Ubiquiti UAP-AC-HD)
- 802.11ac Wave 2 WiFi technology
- 5 GHz (4x4 MU-MIMO) band with a 1.7 Gbps throughput rate
- 2.4 GHz (4x4 MIMO) band with a 800 Mbps throughput rate
- Powered with 802.3at PoE+*
- (2) GbE RJ45 ports
- (1) USB port
Dual-band, 802.11ac Wave 2 access point designed to support high-density networks and critical system applications.
The Access Point AC HD (UAP AC HD) is a high-performance, indoor/outdoor, 802.11 ac WiFi access point that utilizes Wave 2 technology to reach an impressive 2+ Gbps aggregate throughput rate with its 5 GHz (4x4 MU-MIMO) and 2.4 GHz (4x24MIMO) bands. The UAP AC HD also has a focused antenna pattern to enhance your network's capacity and reduce interference from neighboring access points. This access point is powered with 802.3at PoE+ and is equipped with (2) GbE RJ45 ports and (1) USB port to support multiple connection types. The UAP AC HD can be set up in minutes and fully managed with the UniFi Network web application or mobile app.
Features:
| Networking Interface (Mbps) | 2 x 10/100/1000 Ethernet Ports |
|---|---|
| Buttons | Reset |
| Antennas |
2.4 GHz - (2) Dual-Port, Dual-Polarity Antennas, 3 dBi each (Supports 4x4 MIMO), 5 GHz - (2) Dual-Port, Dual-Polarity Antennas, 4 dBi each (Supports 4x4 MIMO) |
| Wi-Fi Standards | 802.11 a/b/g/n/r/k/v/ac/ac-wave2 |
| Power Method |
802.3at PoE+, UniFi Switch (PoE), 44 to 57VDC |
| Maximum Power Consumption | 17W |
| Maximum TX Power |
2.4 GHz - 6-25 dBm, 5 GHz - 6-25 dBm |
| BSSID | 8 per Radio |
| Dimensions | 220 x 220 x 48.1 mm |
| Weight | 700 g (830 g with Mounting Kits) |
| Power Save | Supported |
| Wireless Security |
WEP, WPA-PSK, WPA-Enterprise (WPA/WPA2, TKIP/AES), 802.11w/PMF |
| Certifications |
CE, FCC, IC |
| Mounting | Wall/Ceiling (Kits Included) |
| Operating Temperature | -10 ÷ 70° C |
| Operating Humidity | 5 ÷ 95% Noncondensing |
| Advanced Traffic Management | |
| VLAN | 802.1Q |
| Advanced QoS | Per-User Rate Limiting |
| Guest traffic isolation | Supported |
| WMM |
Voice, Video, Best Effort, and Background |
| Concurrent Clients | 1000+ |
| Supported Data Rates (Mbps) | |
| 802.11a | 6, 9, 12, 18, 24, 36, 48, 54 Mbps |
| 802.11n |
6.5 Mbps to 450 Mbps (MCS0 - MCS23, HT 20/40) |
| 802.11ac |
6.5 Mbps to 1.7 Gbps (MCS0 ‑ MCS9 NSS1/2/3/4, VHT 20/40/80), 58 Mbps to 1.7 Gbps (MCS0 ‑ MCS9 NSS1/2, VHT 160) |
| 802.11b | 1, 2, 5.5, 11 Mbps |
| 802.11g | 6, 9, 12, 18, 24, 36, 48, 54 Mbps |
#05353
Wireless Access Point UniFi UAP-nanoHD (Ubiquiti UAP-nanoHD)
- Four-stream, 802.11ac Wave 2 WiFi technology
- 5 GHz (4x4 MU-MIMO) band with a 1.733 Gbps throughput rate
- 2.4 GHz (2x2 MIMO) band with a 300 Mbps throughput rate
- 200+ concurrent client capacity
- Powered by 802.3af PoE (PoE injector included with single pack)
Dual-band, 802.11ac Wave 2 access point that can support over 200 clients with its 2+ Gbps aggregate throughput rate.
The Access Point nanoHD (UAP nanoHD) is a compact, dual-band access point that can reach a 2+ Gbps aggregate throughput rate with its 5 GHz (4x4 MU-MIMO) and 2.4 GHz (2x2 MIMO) bands. The UAP nanoHD can also support over 200 concurrently connected clients while maintaining an even, reliable wireless experience across your entire network. With its elegant, nano-sized design, this access point can be staged virtually anywhere indoors where you'd like to enhance your wireless speed and performance. Built for plug-and-play simplicity, the UAP nanoHD can be set up in minutes and fully managed with the UniFi Network web application or mobile app.
Features:
| Networking Interface (Mbps) | 1 x 10/100/1000 Ethernet Ports |
|---|---|
| Buttons | Reset |
| Antennas |
2.4 GHz - (2) Single-Port, Single-Polarity Antennas, 2.8 dBi each (Supports 2x2 MIMO), 5 GHz - (2) Single-Port, Dual-Polarity Antennas, 3 dBi each (Supports 4x4 MIMO) |
| Wi-Fi Standards | 802.11 a/b/g/n/r/k/v/ac/ac-wave2 |
| Power Method |
802.3af PoE, UniFi Switch (PoE) |
| Maximum Power Consumption | 10.5W |
| Maximum TX Power |
2.4 GHz - 23 dBm, 5 GHz - 26 dBm |
| BSSID | 8 per Radio |
| Dimensions | 160 x 160 x 32.65 mm |
| Weight | 300 g (315 g with Mounting Kits) |
| Power Save | Supported |
| Wireless Security |
WEP, WPA-PSK, WPA-Enterprise (WPA/WPA2, TKIP/AES), 802.11w/PMF |
| Certifications |
CE, FCC, IC |
| Mounting | Wall/Ceiling (Kits Included) |
| Operating Temperature | -10 ÷ 70° C |
| Operating Humidity | 5 ÷ 95% Noncondensing |
| Advanced Traffic Management | |
| VLAN | 802.1Q |
| Advanced QoS | Per-User Rate Limiting |
| Guest traffic isolation | Supported |
| WMM |
Voice, Video, Best Effort, and Background |
| Concurrent Clients | 200+ |
| Supported Data Rates (Mbps) | |
| 802.11a | 6, 9, 12, 18, 24, 36, 48, 54 Mbps |
| 802.11n |
6.5 Mbps to 450 Mbps (MCS0 - MCS23, HT 20/40) |
| 802.11ac |
6.5 Mbps to 1.7 Gbps (MCS0 ‑ MCS9 NSS1/2/3/4, VHT 20/40/80), 58 Mbps to 1.7 Gbps (MCS0 ‑ MCS9 NSS1/2, VHT 160) |
| 802.11b | 1, 2, 5.5, 11 Mbps |
| 802.11g | 6, 9, 12, 18, 24, 36, 48, 54 Mbps |
#07001
Wireless Base Station LiteBeam 5AC Gen2 (Ubiquiti LBE-5AC-GEN2)
| Ports | 1x 10/100/1000 Mbps RJ-45 |
|---|---|
| Operating modes |
Access Point, Bridge, Client, WDS |
| Processor | MIPS 74Kc |
| Operating memory | 64 MB DDR2 |
| Frequency range | 5150 MHz ÷ 5875 MHz |
| Gain | 23 dBi |
| Antenna |
detachable, 2x SMA-RP(F) |
| Dimensions | 358 x 271.95 x 272.5 mm (14.09 x 10.71 x 10.73") |
| Weight |
800 g (1.76 lb), With Mount 980 g (2.16 lb) |
| Mounting | Pole-Mounting Kit (Included) |
| Max. power consumption | 7 W |
| Power |
24V, 0.3A Gigabit PoE Adapter (Included) |
| Power Method | Passive PoE (Pairs 4, 5+; 7, 8 Return) |
| Supported Voltage Range | 24V ± 10% |
| Wind Loading | 275 N @ 200 km/h (61.8 lbf @ 125 mph) |
| Wind Survivability | 200 km/h (125 mph) |
| ESD/EMP Protection | ± 24 kV Contact / Air |
| Operating temperatures | -40°C ÷ 70°C |
| Operating humidity |
5% ÷ 95%, non-condensing |
| Certificates |
CE, FCC, IC |
| Manufacturer | Ubiquiti |
#07014
Security Gateway UNIFI (Ubiquiti UNIFI USG)
| Ports |
3x 10/100/1000 Mbps RJ-45 (LAN), 1x RJ45 Serial Port |
|---|---|
| LEDs Per Data Port | Status/Power/Speed/Link/Activity |
| Processor |
Dual-Core 500 MHz, MIPS64 with Hardware Acceleration for Packet Processing |
| System Memory | 512 MB DDR2 RAM |
| On-Board Flash Storage | 2 GB |
| Layer 3 Forwarding Performance |
1,000,000 pps, 3 Gbps (Line Rate) |
| Max. Power Consumption | 7 W |
| Power |
12VDC, 1A Power Adapter (Included) |
| Power Input | 9 to 24VDC Supported Voltage Range |
| Dimensions | 135 x 135 x 28.3 mm (5.32 x 5.32 x 1.11") |
| Weight | 366 g |
| Operating temperatures | -10°C ÷ 45°C |
| Operating humidity |
10% ÷ 90%, non-condensing |
| Certificates |
CE, FCC, IC |
| Manufacturer | Ubiquiti |
