Computer Network Accessories
Sunday, 11 April
FLUKE NETWORKS

FLUKE NETWORKS Products

FLUKE NETWORKS
FLUKE NETWORKS
Fluke Networks was established in 1992 as FLUKE's branch. In year 2000 company separated from Fluke as independent branch. Since then, company's income has been still growing, securing their leader position in hi-class telecommunication testing devices. Fluke Networks offers specialized instruments for structural cabling testing, wide area networks analysis and networks monitoring. Structural cabling instruments are placed among strict world's leaders. They allows certification measures of telecommunication installations. As one of the very few companies, Fluke Networks has instruments with class IV accuracy to certify cat.7 installations. Among telecommunication solutions company offers wide range of analyzers, allowing detailed network traffic inspection and discovering installed devices. Software and hardware analyzers can verify and rate WANs, working on ATM, Frame Relay, PPP, HDLC, SONET standards.

Fluke Networks offer includes:
  • cable trackers
  • copper testers
  • fiber testers
  • cable analyzers
  • certification instruments for copper and fiber networks
  • LAN analyzers
  • WAN analyzers
  • WLAN analyzers
  • WAN monitoring and management solutions

Atel Electronics is a distributor of Fluke Networks products

Manufacturer's website: http://www.flukenetworks.com

  • Computer Network Accessories
      • » ADVANCED CABLE TESTERS
          #02903

          IntelliTone 200 Pro - signal probe, cable tester (Fluke Networks MT-8200-60-KIT)

          Tested cables UTP,
          FTP,
          STP,
          RG59,
          RG6,
          CCTV
          Single pair test yes
          Wiremap test yes
          Detected malfunctions break,
          short-circuit,
          crossed pairs,
          reverse pairs
          Detecting signals Ethernet
          Detecting connected devices hub,
          network card
          Additional features locate cables from large distance (1 meter),
          precision locate cable pairs in wisps
          Operating temperature 0C 40C
          Operating humidity 5% 95%,
          non-condensing
          Power 2x 9V 6F22 battery
          Warranty period 12 months
          Manufacturer Fluke Networks
          Toner parameters
          Dimensions 141x75x32 mm
          Display LED
          Control thumbwheel switch
          Auto power down yes
          Ouptut power 5V p-p
          Probe parameters
          Dimensions 222x48x32 mm
          Display 8x LED,
          1x Sync LED
          Control thumbwheel switch,
          volume control wheel
          Auto power down yes
          IntelliTone 200 Pro - signal probe, cable tester (Fluke Networks MT-8200-60-KIT)
          Net Price: 254.00 USD

          #03091

          MicroScanner PoE cable tester (Fluke Networks MS-POE)

          The new generation of the well-known and valued Microscanner. The new tester does not have a socket for coaxial cables. However, new diagnostic possibilities appeared: PoE voltage measurement, determining whether the port is able to provide sufficient power, identification of the port speed up to 10Gbps.
          Display LCD,
          monochrome
          Tested cables UTP,
          FTP,
          SSTP,
          coaxial 75Ω/50Ω/93Ω
          Connectors RJ-11,
          RJ-45,
          F
          Cable length measure 1500ft (460,0 m)
          Wiremap compliant with TIA-568A/B
          Remote device detection switch,
          POTS,
          terminator
          Transmission speed indicator 10 Mbps,
          100 Mbps,
          1000 Mbps,
          2.5Gbps,
          5Gbps,
          10Gbps
          Detected malfunctions open,
          short,
          separated pairs,
          crossed pairs,
          reverse pairs
          Distance to breakage yes
          Working in active networks yes
          Tone generator digital (500 KHz),
          analog (400 Hz / 1 KHz)
          PoE detection yes
          PoE standards 802.3af,
          802.3at,
          802.3bt
          Dimensions 163x76x36 mm
          Weight 363 g
          Warranty 12 months
          Manufaturer Fluke Networks
          Compatible with:
          #02903 IntelliTone 200
          MicroScanner PoE cable tester (Fluke Networks MS-POE)
          for special orders only
          Net Price: 917.00 USD

          #06106

          MicroScanner2 cable tester (Fluke Networks MS2-100)

          Display LCD,
          monochrome
          Tested cables UTP,
          FTP,
          SSTP,
          coaxial 75Ω/50Ω/93Ω
          Connectors RJ-11,
          RJ-45,
          F
          Cable length measure 1500ft (460,0 m) with a 0.3m resolution
          Wiremap compliant with TIA-568A/B
          Remote device detection switch,
          POTS,
          terminator
          Transmission speed indicator 10 Mbps,
          100 Mbps,
          1000 Mbps
          Detected malfunctions open,
          short,
          separated pairs,
          crossed pairs,
          reverse pairs
          Distance to breakage yes
          Working in active networks yes
          Tone generator digital (500 KHz),
          analog (400 Hz / 1 KHz)
          PoE detection yes
          Dimensions 163x76x36 mm
          Weight 363 g
          Warranty 12 months
          Manufaturer Fluke Networks
          |Compatible with:
          #02903 IntelliTone 200
          MicroScanner2 cable tester (Fluke Networks MS2-100)
          Net Price: 711.00 USD

          #06249

          MicroScanner2 Pro Kit (Fluke Networks MS2-KIT)

          MicroScanner² Pro
          Display LCD,
          1.75" x 0.85"
          Tested cables UTP,
          STP,
          FTP,
          RG59,
          RG9,
          CCTV
          Cable parameters test yes
          Transmission type detection Half Duplex,
          Full Duplex
          Device type detection hub,
          network card
          Transmission speed detection 10 Mbps,
          100 Mbps,
          1000 Mbps
          Cable length measure 0.5 - 460 m
          Distance to break/short yes
          Working in active networks yes
          Continuous test yes
          Wiremap test yes
          Cable faults detection open,
          short,
          separated pairs,
          crossed pairs,
          reverse pairs
          Tone generation digital (500 KHz),
          analog (400 Hz / 1 KHz)
          PoE detection yes
          Dimensions 163x76x36 mm
          Warranty period 12 months
          Manufacturer Fluke Networks
          IntelliTone 200 Probe
          Single pair test yes
          Additional features locate cables from large distance,
          precision locate cable pairs in wisps
          Operating temperature 0C 40C
          Operating humidity 5% 95%,
          non-condensing
          Included accessories:
          Line identifiers (1 to 6)
          Wiremap adaptor (FL-MT8203-14)
          RJ-45/F adaptor(FL-MT8203-15)
          RJ-45/aligator adaptor (FL-MT8203-16)
          MicroScanner2 Pro Kit (Fluke Networks MS2-KIT)
          Net Price: 1230.00 USD

      • » VERIFING CABLE TESTERS
          #05814

          Cable IQ Advanced Kit cable tester (Fluke Networks CIQ-KIT)

          Cable IQ
          Tested cables UTP,
          STP,
          FTP,
          SSTP,
          RG6,
          RG59,
          audio,
          security
          Qualification autotests 1000BASE-T,
          100BASE-TX,
          10BASE-T,
          VoIP,
          1394b S100,
          TELCO,
          Wiremap only,
          Coax
          Bandwidth verification 10/100/1000 Mbps,
          VoIP
          Transmission type detection Half Duplex,
          Full Duplex
          Supported tests wiremap,
          cable length,
          signal performance,
          Ethernet port detection and identification,
          port identification,
          continuity,
          fault finding
          Detected devices telephones,
          network devices
          Video signal detection yes
          Cable fault tests break,
          short,
          reversed pairs,
          crossed pairs,
          splitted pairs
          Highlight yes
          Tone generator inbuit
          Results storage 250 records
          Power 4xAA (NEDA 15A,
          IEC LR6) alkaline batteries
          Battery life 20 hours of typical use,
          without backlight
          Weight 0.55 kg
          Dimensions 178x89x45 mm
          IntelliTone 200
          Display 8x LED,
          1x Sync LED
          Control thumbwheel switch,
          volume control wheel
          Single pair test yes
          Wiremap test yes
          Detected malfunctions break,
          short-circuit,
          crossed pairs,
          reverse pairs
          Additional features locate cables from large distance,
          precision locate cable pairs in wisps
          Operating temperature 0C 40C
          Operating humidity 5% 95%,
          non-condensing
          Dimensions 222x48x32 mm
          Warranty period 12 months
          Manufacturer Fluke Networks
          Cable IQ Advanced Kit cable tester (Fluke Networks CIQ-KIT)
          for special orders only
          Net Price: 2590.00 USD

          #05716

          Cable IQ cable tester (Fluke Networks CIQ-100)

          Tested cables UTP,
          STP,
          FTP,
          SSTP,
          RG6,
          RG59,
          audio,
          security
          Qualification autotests 1000BASE-T,
          100BASE-TX,
          10BASE-T,
          VoIP,
          1394b S100,
          TELCO,
          Wiremap only,
          Coax
          Bandwidth verification 10/100/1000 Mbps,
          VoIP
          Transmission type detection Half Duplex,
          Full Duplex
          Supported tests wiremap,
          cable length,
          signal performance,
          Ethernet port detection and identification,
          port identification,
          continuity,
          fault finding
          Detected devices telephones,
          network devices
          Video signal detection yes
          Cable fault tests break,
          short,
          reversed pairs,
          crossed pairs,
          splitted pairs
          Highlight yes
          Tone generator inbuit
          Results storage 250 records
          Power 4xAA (NEDA 15A,
          IEC LR6) alkaline batteries
          Battery life 20 hours of typical use,
          without backlight
          Weight 0.55 kg
          Dimensions 178x89x45 mm
          Warranty period 12 months
          Manufacturer Fluke Networks
          Working with:
          #02903 IntelliTone 200
          Cable IQ cable tester (Fluke Networks CIQ-100)
          Net Price: 1970.00 USD



top