Atel Electronics
[-]remove#08433 [-]remove#05848 [-]remove#07623 [-]remove#08756
Unmanaged switch, 4x 10/1000 RJ-45 PoE, 1x 10/1000 RJ-45, 1x 1000 SFP socket, slim housing (ORing IGPS-1411GTP-24V) Insulating tape red PVC 14 slots rack-mount chassis for unmanaged media converters (Wave Optics, WO-KR-14) Attenuator 5dB LC/UPC(F) - LC/UPC(M) singlemode
Operating Wavelength - - - 1200-1600nm or 1310nm,
1550nm
Capacity - - 14 media converters -
Carrier - plasticized PVC film - -
Return Loss - - - ≤55 dB (UPC)
AC Power Supply - - Input 100-240V~50/60Hz 3.0A(Max),
Output +9.5VDC 9.5A(Max)
-
Adhesive - acrylic - -
Thickness - 0.15 mm - -
Attenuation Accuracy - - - +/-0.5
Operating Temperature - - 0°C~40°C -40 ÷ 80°C
Widths - 15 mm - -
Polarization Dependent Loss - - - ≤0.2dB
Storage Temperature - - -40°C~70°C -
Maximum Optical Input Power - - - 200mW
Operating Humidity - - 10%~90% non-condensing -
Tensile strength - 25 N/cm - -
Storage Humidity - - 5%~90% non-condensing -
Elongation at break - 190% - -
Adhesion on steel - 2.0 N/cm - -
Weight - - 6kg -
Breakdown voltage - > 40 kV/mm - -
Dimensions - - 482x358x86 mm -
Temperature range - -10 up to 105 degree C - -
Certificates - VDE,
OVE,
CEBEC
FCC Class A & CE Mark -
Manufacturer - - Wave Optics -
Complies with - EN 60 454-3-1F-PVC / 105 / A-Tx Type 10 - -
DIP-Switch
DIP-Switch 1 Power-1 failed warning - (ON) enable,
(OFF) disable
- - -
DIP-Switch 2 Power-2 failed warning - (ON) enable,
(OFF) disable
- - -
Environmental
Storage Temperature -40÷85°C (-40÷185°F) - - -
Operating Temperature -40÷60°C (-40÷140°F) - - -
Operating Humidity 5%÷95% Non-condensing - - -
Fault contact
Relay Relay output to carry capacity of 1A at 24VDC - - -
LED Indicators
Power indicator Green - Power LED x 2 - - -
Fault indicator Amber - Indicate PWR1 or PWR2 failure - - -
10/100/1000Base-T(X) RJ45 port indicator and PoE Indicator (P1÷P4) Green for port Link/Act.,
Green for power injected
- - -
10/100/1000Base-T(X) RJ45 port Indicator (P5) Green for port Link/Act.,
Amber for 100Mbps Indicator
- - -
100/1000Base-X SFP port indicator Green for port Link/Act. - - -
Physical Characteristic
Enclosure IP-30 - - -
Dimension (W x D x H) 41 (W) x 94.9 (D) x 144.3(H) mm - - -
Weight 580 g - - -
Physical Ports
10/100/1000 Base-T(X) Ports in RJ45 Auto MDI/MDIX with PoE+ (P.S.E.) 4 - - -
10/100/1000 Base-T(X) Ports in RJ45 Auto MDI/MDIX 1 - - -
100/1000Base-X SFP port 1 - - -
Power
Input power Dual DC inputs. 12~36VDC on 6-pin terminal block - - -
Power consumption (typical) 6.5W - - -
Overload current protection present - - -
Reverse polarity protection not present - - -
Regulatory approvals
EMI FCC Part 15,
CISPR (EN55022) class A
- - -
EMS EN61000-4-2 (ESD),
EN61000-4-3 (RS),
EN61000-4-4 (EFT),
EN61000-4-5 (Surge),
EN61000-4-6 (CS),
EN61000-4-8,
EN61000-4-11
- - -
Shock IEC60068-2-27 - - -
Free Fall IEC60068-2-32 - - -
Vibration IEC60068-2-6 - - -
Safety EN60950-1 - - -
SFP Speed DIP-Switch
DIP-Switch 1/2 DIP-Switch 1 (ON) and DIP-Switch 2 (ON) - SFP speed setting to 100Mbps DIP-Switch 1 (OFF) and DIP-Switch 2 (OFF) - SFP speed setting to 1000Mbps - - -
Technology
Ethernet Standards IEEE 802.3 for 10BaseT,
IEEE 802.3u for 100BaseT(X),
IEEE 802.3ab for 1000Base-T,
IEEE 802.3x for Flow control,
802.3at PoE specyfication
- - -
MAC Table 1024 MAC addresses - - -
Processing Store-and-Forward - - -
Warranty
Warranty period 5 years - - -
Net Price 389.00 USD 0.598 USD 128.00 USD 3.07 USD

« return to products list