 |
 |
 |
 |
 |
 |
| [-]remove#06754 |
[-]remove#08407 |
[-]remove#06841 |
[-]remove#08759 |
[-]remove#07993 |
| Module, SFP 1x 1000 Mbps LC SM, 40 km, w/DDMI diagnostics (WO-SSL-1213-040K-DI) |
Power supply 480W 24VDC, P.F.C., DIN TS35 (Mean Well WDR-480-24) |
Module, SFP 1x 100 Mbps LC MM, 2 km, TX: 1310 nm (Wave Optics, WO-SML-0113-002K) |
Attenuator 15dB LC/UPC(F) - LC/UPC(M) singlemode |
Unmanaged switch, 4x 10/100 RJ-45 PoE + 2x 100 SM SC (ORing IPS-1042-FX-SS-SC-24V) |
| Operating Wavelength |
-
|
-
|
-
|
1200-1600nm or 1310nm,
1550nm
|
-
|
| Port |
1x 1000 Mbps LC SM
|
-
|
1x 100 Mbps LC MM
|
-
|
-
|
| Return Loss |
-
|
-
|
-
|
≤55 dB (UPC)
|
-
|
| TX wavelength |
1310 nm
|
-
|
1310 nm
|
-
|
-
|
| RX wavelength |
1310 nm
|
-
|
1310 nm
|
-
|
-
|
| Attenuation Accuracy |
-
|
-
|
-
|
+/-1.0
|
-
|
| Polarization Dependent Loss |
-
|
-
|
-
|
≤0.2dB
|
-
|
| Max. distance |
40 km
|
-
|
2 km
|
-
|
-
|
| Maximum Optical Input Power |
-
|
-
|
-
|
200mW
|
-
|
| Cable type |
50/125, 62.5/125, 100/140 µm
|
-
|
50/125, 62.5/125
|
-
|
-
|
| Operating temperature |
-40°C ÷ 85°C
|
-
|
-
|
-40 ÷ 80°C |
-
|
| DDMI |
yes
|
-
|
-
|
-
|
-
|
| Supports |
-
|
-
|
SDH/STM-1,
SONET/OC-3,
Fast Ethernet
|
-
|
-
|
| Module type |
SFP
|
-
|
SFP
|
-
|
-
|
| Warranty period |
1 year |
-
|
1 year
|
-
|
-
|
| Manufacturer |
-
|
-
|
Wave Optics |
-
|
-
|
| Environment |
| Working temperature |
-
|
-30°C ÷ 70°C
|
-
|
-
|
-
|
| Working humidity |
-
|
20÷95% RH non-condensing
|
-
|
-
|
-
|
| Storage temperature |
-
|
-40°C ÷ 85°C
|
-
|
-
|
-
|
| Storage Humidity |
-
|
10÷95% RH
|
-
|
-
|
-
|
| Temperature coefficient |
-
|
±0.03%/°C (0÷50°C)
|
-
|
-
|
-
|
| Vibration (component) |
-
|
10÷500Hz,
2G 10min./1cycle,
60min. each along X Y Z axes
|
-
|
-
|
-
|
| Vibration (mounting) |
-
|
compliance to IEC60068-2-6
|
-
|
-
|
-
|
| Environmental |
| Storage Temperature |
-
|
-
|
-
|
-
|
-40÷85°C
|
| Operating Temperature |
-
|
-
|
-
|
-
|
-40÷70°C
|
| Operating Humidity |
-
|
-
|
-
|
-
|
5%÷95% Non-condensing
|
| Fault contact |
| Relay |
-
|
-
|
-
|
-
|
Relay output to carry capacity of 1A at 24VDC
|
| Input |
| Voltage range |
-
|
180÷550VAC,
254÷780VDC
|
-
|
-
|
-
|
| Frequency range |
-
|
47÷63Hz
|
-
|
-
|
-
|
| Efficiency (typ.) |
-
|
92%
|
-
|
-
|
-
|
| AC current (typ.) |
-
|
1.6A/400VAC,
4A/230VAC
|
-
|
-
|
-
|
| Inrush current (typ.) |
-
|
50A
|
-
|
-
|
-
|
| Leakage current |
-
|
<3,5mA/530VAC
|
-
|
-
|
-
|
| LED Indicators |
| Power indicator |
-
|
-
|
-
|
-
|
Green - Power LED x 2
|
| Fault indicator |
-
|
-
|
-
|
-
|
Amber - Indicate PWR1 or PWR2 failure
|
| 10/100TX RJ45 port Indicator |
-
|
-
|
-
|
-
|
Green for port Link/Act.,
Green for PoE power injected
|
| 100Base-FX Fiber Port Indicator |
-
|
-
|
-
|
-
|
Green for port Link/Act.
|
| Others |
| MTBF |
-
|
min. 268000h MIL-HDBK-217F (25°C)
|
-
|
-
|
-
|
| Dimension (W x H x D) |
-
|
85.5mm x 125.2mm x 128.5mm
|
-
|
-
|
-
|
| Weight |
-
|
1.7kg |
-
|
-
|
-
|
| Output |
| DC Voltage |
-
|
24V
|
-
|
-
|
-
|
| Rated current |
-
|
20A
|
-
|
-
|
-
|
| Current Range |
-
|
0÷20A
|
-
|
-
|
-
|
| Rated Power |
-
|
480W
|
-
|
-
|
-
|
| Ripple & noise (max.) |
-
|
100mVp-p
|
-
|
-
|
-
|
| Voltage adjustment range |
-
|
24÷28V
|
-
|
-
|
-
|
| Voltage tolerance |
-
|
±1.0%
|
-
|
-
|
-
|
| Line regulation |
-
|
±0.5%
|
-
|
-
|
-
|
| Load regulation |
-
|
±1.0%
|
-
|
-
|
-
|
| Setup & rise time |
-
|
800ms & 150ms/400VAC at full load,
2000ms & 150ms/230VAC at full load
|
-
|
-
|
-
|
| Hold up time (typ.) |
-
|
18ms/400VAC at full load,
16ms/230VAC at full load
|
-
|
-
|
-
|
| Physical Characteristic |
| Enclosure |
-
|
-
|
-
|
-
|
IP-30
|
| Dimension (W x D x H) |
-
|
-
|
-
|
-
|
41mm x 94.9m x 144.3mm
|
| Weight |
-
|
-
|
-
|
-
|
530g
|
| Physical Ports |
| 10/100 Base-T(X) Ports in RJ45 Auto MDI/MDIX |
-
|
-
|
-
|
-
|
4
|
| 100Base-SX Multimode ports (30km, 1310nm, SC connector) |
-
|
-
|
-
|
-
|
2
|
| Power |
| Input power |
-
|
-
|
-
|
-
|
Dual DC inputs. 12~57VDC on 6-pin terminal block
|
| Power consumption (typical) |
-
|
-
|
-
|
-
|
5.6W
|
| Overload current protection |
-
|
-
|
-
|
-
|
present
|
| Reverse polarity protection |
-
|
-
|
-
|
-
|
not present
|
| Protection |
| Overload |
-
|
105%÷130% rated output power,
protection type - constant current limiting - recovers automatically after fault condition is removed
|
-
|
-
|
-
|
| Overvoltage |
-
|
29÷33V,
protection type - shut down o/p voltage & re-power on to recover
|
-
|
-
|
-
|
| Over temperature |
-
|
95°C ±5°C (TSW1) detect on heatsink of power transistor,
protection type - shut down o/p voltage & re-power on to recover
|
-
|
-
|
-
|
| Regulatory approvals |
| EMI |
-
|
-
|
-
|
-
|
FCC Part 15,
CISPR (EN55022) class A
|
| EMS |
-
|
-
|
-
|
-
|
EN61000-4-2 (ESD),
EN61000-4-3 (RS),
EN61000-4-4 (EFT),
EN61000-4-5 (Surge),
EN61000-4-6 (CS),
EN61000-4-8,
EN61000-4-11
|
| Shock |
-
|
-
|
-
|
-
|
IEC60068-2-27
|
| Free Fall |
-
|
-
|
-
|
-
|
IEC60068-2-32
|
| Vibration |
-
|
-
|
-
|
-
|
IEC60068-2-6
|
| Safety |
-
|
-
|
-
|
-
|
EN60950-1
|
| Safety & EMC |
| Safety standards |
-
|
UL508,
UL60950-1,
TUV EN60950-1
|
-
|
-
|
-
|
| Withstand voltage |
-
|
I/P-O/P 3kVAC,
I/P-FG 1.5kVAC,
O/P-FG 0.5kVAC
|
-
|
-
|
-
|
| Isolation resistance |
-
|
I/P-O/P 100MΩ/500VDC,
I/P-FG 100MΩ/500VDC,
O/P-FG 100MΩ/500VDC
|
-
|
-
|
-
|
| EMI conduction & radiation |
-
|
EN55011,
EN55022 (CISPR22),
EN61204-3 Class B
|
-
|
-
|
-
|
| Harmonic current |
-
|
EN61000-3-2,
EN61000-3-3
|
-
|
-
|
-
|
| EMS immunity |
-
|
EN61000-4-2/3/4/5/6/8/11,
ENV50204,
EN55024,
EN61000-6-2 (EN50082-2),
heavy industry level criteria A
|
-
|
-
|
-
|
| Technology |
| Ethernet Standards |
-
|
-
|
-
|
-
|
IEEE 802.3 for 10BaseT,
IEEE 802.3u for 100BaseT(X),
IEEE 802.3x for Flow control,
802.3at PoE specyfication
|
| MAC Table |
-
|
-
|
-
|
-
|
2048 MAC addresses
|
| Processing |
-
|
-
|
-
|
-
|
Store-and-Forward
|
| Warranty |
| Warranty period |
-
|
-
|
-
|
-
|
5 years |
| Net Price |
12.70 USD |
226.00 USD |
6.88 USD |
3.07 USD |
482.00 USD |