Atel Electronics
[-]remove#05069 [-]remove#02303 [-]remove#04973 [-]remove#06531 [-]remove#04465
Patch cable S/FTP (PiMF) cat. 6A, 3.0 m, yellow, LSOH Punch down tool, Krone type terminal (AT-314KR) Double sided cable tie, blue, 10mm x 5m Wireless access point, 2x 10/100/1000 RJ-45 (LAN + PoE PD) + 1x 802.11b/g/n (WLAN) (ORing IAP-420+) Patch cable S/FTP (PiMF) cat. 6A, 0.25 m, grey
Purpose - Krone type terminals - - -
Width - - 10mm - -
Clamping force adjustment - no - - -
Length - - 5m - -
Spring lock - no - - -
Color - - Blue - -
Replaceable tip - no - - -
Automatic cutting of excess core - yes - - -
Packaging - cardboard - - -
Cable
Shielding type / cat S/FTP cat 6A - - - S/FTP cat 6A
Cable construction 4x2x7/0.15Cu + foil AL + oplot + LSOH - - - 4x2x7/0.15Cu + foil AL + oplot + LSOH
Core diameter / AWG 26 - - - 26
Outer diameter 4,1 mm,
LSOH
- - - 4,1 mm,
LSOH
Connector
RJ45 plug / molded 8p8c shielded,
gold plated pins
- - - 8p8c shielded,
gold plated pins
Impedance 100 Mhz 100 +/- 5 Ohm - - - 100 +/- 5 Ohm
Frequency 500 MHz - - - 500 MHz
Working temperature 0°C - 60°C - - - 0°C - 60°C
RoHS 2011/65/EU EN IEC 63000 - - - EN IEC 63000
Standards EN 50173-1,
ISO/IEC 11801,
IEC60332-1,
IEC-60603-7-5,
TIA/EIA 568B
- - - EN 50173-1,
ISO/IEC 11801,
IEC60332-1,
IEC-60603-7-5,
TIA/EIA 568B
Environmental
Storage Temperature - - - -40÷85°C -
Operating Temperature - - - -10÷60°C -
Operating Humidity - - - 5%÷95% Non-condensing -
LED Indicators
Power Indicator - - - LED x 3,
PWR 1, 2,
(PoE),
Green On- Power is on and functioning Normally.
-
10/100Base-T(X) RJ45 Port Indicator - - - 2 x LEDs,
Green for port Link/ Act
-
WLAN LEDs - - - LED,
Green (blinking) for WLAN
-
Physical Characteristic
Enclosure - - - IP-30 -
Dimension (W x D x H) - - - 41(W)x81(D)x95(H) mm -
Weight - - - 292g -
Physical Ports
10/100 Base-T(X) Ports in RJ45 Auto MDI/MDIX - - - 2 (one port with PoE) -
PoE PD Port - - - Present at ETH,
Fully compliant with IEEE 802.3af Power Device specification,
Over load and short circuit protection,
Isolation Voltage 1000 VDC min.,
Isolation Resistance 108MΩ min
-
Power
Redundant Input Power - - - Dual DC inputs. 12~48VDC on 4-pin terminal block -
Power consumption (typical) - - - 4W -
Overload Current Protection - - - Present -
Reverse Polarity Protection - - - Present -
Regulatory approvals
EMI - - - FCC Part 15,
CISPR (EN55022) class A
-
EMS - - - EN61000-4-2 (ESD),
EN61000-4-3 (RS),
EN61000-4-4 (EFT),
EN61000-4-5 (Surge),
EN61000-4-6 (CS),EN61000-4-8,
EN61000-4-11
-
Shock - - - IEC60068-2-27 -
Free Fall - - - IEC60068-2-32 -
Vibration - - - IEC60068-2-6 -
Safety - - - EN60950-1 -
Warranty
Warranty period - - - 5 years -
WLAN interface
Operating Mode - - - AP/Bridge/Bridge/AP-Client -
Antenna Connector - - - 1 x External reverse SMA-type antenna connector -
Radio Frequency Type - - - DSSS,
OFDM
-
Modulation IEEE802.11b - - - CCK,
DQPSK,
DBPSK
-
Modulation IEEE802.11g/n - - - OFDM with BPSK,
QPSK,
16QAM,
64QAM
-
Frequency Band - - - 2.412~2.472 Ghz (13 channels) -
Transmission Rate - - - IEEE802.11b 1/2/5.5/11 Mbps,
IEEE802.11g 6/9/12/18/24/36/48/54 Mbps,
IEEE802.11n UP to 150 Mbps
-
Transmit Power - - - 802.11b 19dBm ± 1.5dBm@11Mbps,
802.11g 17dBm ± 1.5dBm@54Mbps,
802.11gn HT20 16.5dBm ± 1.5dBm @MCS7, 802.11n HT40 14.5dBm ± 1.5dBm @MCS7
-
Receiver Sensitivity - - - 802.11b -90dBm ± 2dBm@1Mbps,
802.11g -72dBm ± 2dBm@54Mbps,
802.11n HT20 -68dBm ± 2dBm@MCS7
-
Encryption Security - - - WEP (64-bit ,128-bit key),
WPA/WPA2 PSK - TKIP and AES encryption (802.11i),
802.1X/RADIUS Authentication supported
-
Wireless Security - - - SSID broadcast disable -
Protocol Support - - - ARP,
BOOTP,
DHCP,
DNS,
HTTPs,
IP,
ICMP,
SNTP,
TCP,
UDP,
RADIUS,
SNMP,
STP (IEEE 802.1D)
-
Net Price 2.23 USD 3.08 USD 0.973 USD 270.00 USD 0.806 USD

« return to products list