Atel Electronics
[-]remove#07991 [-]remove#07998 [-]remove#04427
Unmanaged switch, 4x 10/100 RJ-45 PoE + 2x 100 SM SC, slim housing (ORing IPS-1042-FA-SS-SC) Unmanaged SPE switch, 4x 10 T1L + 1x 100 RJ-45 (ORing ITPS-141TX-T1L) Patch cable UTP cat. 5e, 20.0 m, blue, LSZH
Cable
Shielding type / cat - - UTP cat 5e,
unshielded
Cable construction - - 4x2 (1P*7/0.15CCA)*4 + LSZH
Core diameter / AWG - - 26
Outer diameter - - 5,0 mm,
LSZH
Connector
RJ45 plug / molded - - 8p8c unshielded,
gold plated pins
Impedance 100 Mhz - - 100 +/-5 Ohm
Frequency - - 100 MHz
Working temperature - - 0°C - 60°C
RoHS 2011/65/EU - - EN IEC 63000
Standards - - EN 50173-1,
ISO/IEC 11801,
IEC60332-1,
IEC-60603-7-5,
TIA/EIA 568B
Environmental
Storage Temperature -40÷85°C -40÷85°C -
Operating Temperature -40÷70°C -40÷70°C -
Operating Humidity 5%÷95% Non-condensing 5%÷95% Non-condensing -
Fault contact
Relay Relay output to carry capacity of 1A at 24VDC - -
IEEE 802.3bu for PoDL
MAC Table - 1K MAC addresses -
Processing - Store-and-Forward -
LED Indicators
Power indicator Green - Power LED x 2 Green - Power LED -
10Base-T1L (PoDL) indicator - Green for port Link/Act,
Amber for PoDL PD device is connected
-
Fault indicator Amber - Indicate PWR1 or PWR2 failure - -
10/100TX RJ45 port Indicator Green for port Link/Act.,
Green for PoE power injected
- -
10/100Base-T(X) RJ45 port indicator - Green for port Link/Act.,
Amber for 10Mbps/ Green for 100Mbps indicator
-
100Base-FX Fiber Port Indicator Green for port Link/Act. - -
Physical Characteristic
Enclosure IP-30 IP-30 -
Dimension (W x D x H) 26.1mm x 94.9m x 144.3mm 28 x 108.3 x 145.1 mm -
Weight 395g 530g -
Physical Ports
10/100 Base-T(X) Ports in RJ45 Auto MDI/MDIX 4 - -
10Base-T1L with PoDL - 4 -
100Base-SX Multimode ports (30km, 1310nm, SC connector) 2 - -
10/100Base-T(X) Port in RJ45 Auto MDI/MDIX - 1 -
PoDL
24v - Class 10~12,
up to 20W
-
50v - Class 13~14,
up to 30W
-
Force mode - Up to 50W/1A -
PoDL Dip switch
PoDL - On - Enable PoDL,
OFF - Disable PoDL
-
SCCP mode - Turn on SCCP-based classification ensures full operating voltage is applied by the Power Sourcing Equipment (PSE) when a valid PD is connected -
Force mode - Force enable PoDL without classification (Does NOT support hot plugging before enabling Force mode) -
Power
Input power Dual DC inputs. 50~57VDC on 6-pin terminal block DC 24VDC (20~30VDC) -
Power consumption (typical) 5.6W Max.3.47A -
Overload current protection present present -
Reverse polarity protection not present present -
PoE - Power Budget 80Watts -
Regulatory approvals
EMI FCC Part 15,
CISPR (EN55022) class A
FCC Part 15,
CISPR (EN55032) class A
-
EMS EN61000-4-2 (ESD),
EN61000-4-3 (RS),
EN61000-4-4 (EFT),
EN61000-4-5 (Surge),
EN61000-4-6 (CS),
EN61000-4-8,
EN61000-4-11
- -
Shock IEC60068-2-27 - -
Free Fall IEC60068-2-32 - -
Vibration IEC60068-2-6 - -
Safety EN60950-1 - -
Technology
Ethernet Standards IEEE 802.3 for 10BaseT,
IEEE 802.3u for 100BaseT(X),
IEEE 802.3x for Flow control,
802.3at PoE specyfication
IEEE 802.3 for 10BaseT,
IEEE 802.3u for 100BaseT(X),
IEEE 802.3x for Flow control,
IEEE 802.3cg for 10Base-T1L
-
MAC Table 2048 MAC addresses - -
Processing Store-and-Forward - -
Warranty
Warranty period 5 years 5 years -
Net Price 441.00 USD 627.00 USD 3.02 USD

« return to products list