Atel Electronics
[-]remove#07991 [-]remove#07998 [-]remove#04427 [-]remove#06531 [-]remove#06755
Unmanaged switch, 4x 10/100 RJ-45 PoE + 2x 100 SM SC, slim housing (ORing IPS-1042-FA-SS-SC) Unmanaged SPE switch, 4x 10 T1L + 1x 100 RJ-45 (ORing ITPS-141TX-T1L) Patch cable UTP cat. 5e, 20.0 m, blue, LSZH Wireless access point, 2x 10/100/1000 RJ-45 (LAN + PoE PD) + 1x 802.11b/g/n (WLAN) (ORing IAP-420+) Module, SFP 1x 1000 Mbps LC SM, 80 km, w/DDMI diagnostics (WO-SSL-1215-080K-DI)
Port - - - - 1x 1000 Mbps LC SM
TX wavelength - - - - 1550 nm
RX wavelength - - - - 1550 nm
Max. distance - - - - 80 km
Cable type - - - - 50/125, 62.5/125, 100/140 µm
Operating temperature - - - - -40°C ÷ 85°C
DDMI - - - - yes
Module type - - - - SFP
Warranty period - - - - 1 year
Cable
Shielding type / cat - - UTP cat 5e,
unshielded
- -
Cable construction - - 4x2 (1P*7/0.15CCA)*4 + LSZH - -
Core diameter / AWG - - 26 - -
Outer diameter - - 5,0 mm,
LSZH
- -
Connector
RJ45 plug / molded - - 8p8c unshielded,
gold plated pins
- -
Impedance 100 Mhz - - 100 +/-5 Ohm - -
Frequency - - 100 MHz - -
Working temperature - - 0°C - 60°C - -
RoHS 2011/65/EU - - EN IEC 63000 - -
Standards - - EN 50173-1,
ISO/IEC 11801,
IEC60332-1,
IEC-60603-7-5,
TIA/EIA 568B
- -
Environmental
Storage Temperature -40÷85°C -40÷85°C - -40÷85°C -
Operating Temperature -40÷70°C -40÷70°C - -10÷60°C -
Operating Humidity 5%÷95% Non-condensing 5%÷95% Non-condensing - 5%÷95% Non-condensing -
Fault contact
Relay Relay output to carry capacity of 1A at 24VDC - - - -
IEEE 802.3bu for PoDL
MAC Table - 1K MAC addresses - - -
Processing - Store-and-Forward - - -
LED Indicators
10Base-T1L (PoDL) indicator - Green for port Link/Act,
Amber for PoDL PD device is connected
- - -
Fault indicator Amber - Indicate PWR1 or PWR2 failure - - - -
10/100TX RJ45 port Indicator Green for port Link/Act.,
Green for PoE power injected
- - - -
100Base-FX Fiber Port Indicator Green for port Link/Act. - - - -
Power Indicator Green - Power LED x 2 Green - Power LED - LED x 3,
PWR 1, 2,
(PoE),
Green On- Power is on and functioning Normally.
-
10/100Base-T(X) RJ45 Port Indicator - Green for port Link/Act.,
Amber for 10Mbps/ Green for 100Mbps indicator
- 2 x LEDs,
Green for port Link/ Act
-
WLAN LEDs - - - LED,
Green (blinking) for WLAN
-
Physical Characteristic
Enclosure IP-30 IP-30 - IP-30 -
Dimension (W x D x H) 26.1mm x 94.9m x 144.3mm 28 x 108.3 x 145.1 mm - 41(W)x81(D)x95(H) mm -
Weight 395g 530g - 292g -
Physical Ports
10/100 Base-T(X) Ports in RJ45 Auto MDI/MDIX 4 - - 2 (one port with PoE) -
10Base-T1L with PoDL - 4 - - -
10/100Base-T(X) Port in RJ45 Auto MDI/MDIX - 1 - - -
PoE PD Port - - - Present at ETH,
Fully compliant with IEEE 802.3af Power Device specification,
Over load and short circuit protection,
Isolation Voltage 1000 VDC min.,
Isolation Resistance 108MΩ min
-
100Base-SX Multimode ports (30km, 1310nm, SC connector) 2 - - - -
PoDL
24v - Class 10~12,
up to 20W
- - -
50v - Class 13~14,
up to 30W
- - -
Force mode - Up to 50W/1A - - -
PoDL Dip switch
PoDL - On - Enable PoDL,
OFF - Disable PoDL
- - -
SCCP mode - Turn on SCCP-based classification ensures full operating voltage is applied by the Power Sourcing Equipment (PSE) when a valid PD is connected - - -
Force mode - Force enable PoDL without classification (Does NOT support hot plugging before enabling Force mode) - - -
Power
Input power Dual DC inputs. 50~57VDC on 6-pin terminal block DC 24VDC (20~30VDC) - - -
PoE - Power Budget 80Watts - - -
Redundant Input Power - - - Dual DC inputs. 12~48VDC on 4-pin terminal block -
Power consumption (typical) 5.6W Max.3.47A - 4W -
Overload Current Protection present present - Present -
Reverse Polarity Protection not present present - Present -
Regulatory approvals
EMI FCC Part 15,
CISPR (EN55022) class A
FCC Part 15,
CISPR (EN55032) class A
- FCC Part 15,
CISPR (EN55022) class A
-
EMS EN61000-4-2 (ESD),
EN61000-4-3 (RS),
EN61000-4-4 (EFT),
EN61000-4-5 (Surge),
EN61000-4-6 (CS),
EN61000-4-8,
EN61000-4-11
- - EN61000-4-2 (ESD),
EN61000-4-3 (RS),
EN61000-4-4 (EFT),
EN61000-4-5 (Surge),
EN61000-4-6 (CS),EN61000-4-8,
EN61000-4-11
-
Shock IEC60068-2-27 - - IEC60068-2-27 -
Free Fall IEC60068-2-32 - - IEC60068-2-32 -
Vibration IEC60068-2-6 - - IEC60068-2-6 -
Safety EN60950-1 - - EN60950-1 -
Technology
Ethernet Standards IEEE 802.3 for 10BaseT,
IEEE 802.3u for 100BaseT(X),
IEEE 802.3x for Flow control,
802.3at PoE specyfication
IEEE 802.3 for 10BaseT,
IEEE 802.3u for 100BaseT(X),
IEEE 802.3x for Flow control,
IEEE 802.3cg for 10Base-T1L
- - -
MAC Table 2048 MAC addresses - - - -
Processing Store-and-Forward - - - -
Warranty
Warranty period 5 years 5 years - 5 years -
WLAN interface
Operating Mode - - - AP/Bridge/Bridge/AP-Client -
Antenna Connector - - - 1 x External reverse SMA-type antenna connector -
Radio Frequency Type - - - DSSS,
OFDM
-
Modulation IEEE802.11b - - - CCK,
DQPSK,
DBPSK
-
Modulation IEEE802.11g/n - - - OFDM with BPSK,
QPSK,
16QAM,
64QAM
-
Frequency Band - - - 2.412~2.472 Ghz (13 channels) -
Transmission Rate - - - IEEE802.11b 1/2/5.5/11 Mbps,
IEEE802.11g 6/9/12/18/24/36/48/54 Mbps,
IEEE802.11n UP to 150 Mbps
-
Transmit Power - - - 802.11b 19dBm ± 1.5dBm@11Mbps,
802.11g 17dBm ± 1.5dBm@54Mbps,
802.11gn HT20 16.5dBm ± 1.5dBm @MCS7, 802.11n HT40 14.5dBm ± 1.5dBm @MCS7
-
Receiver Sensitivity - - - 802.11b -90dBm ± 2dBm@1Mbps,
802.11g -72dBm ± 2dBm@54Mbps,
802.11n HT20 -68dBm ± 2dBm@MCS7
-
Encryption Security - - - WEP (64-bit ,128-bit key),
WPA/WPA2 PSK - TKIP and AES encryption (802.11i),
802.1X/RADIUS Authentication supported
-
Wireless Security - - - SSID broadcast disable -
Protocol Support - - - ARP,
BOOTP,
DHCP,
DNS,
HTTPs,
IP,
ICMP,
SNTP,
TCP,
UDP,
RADIUS,
SNMP,
STP (IEEE 802.1D)
-
Net Price 441.00 USD 627.00 USD 3.02 USD 270.00 USD 30.80 USD

« return to products list