Atel Electronics
[-]remove#08433 [-]remove#05848
Unmanaged switch, 4x 10/1000 RJ-45 PoE, 1x 10/1000 RJ-45, 1x 1000 SFP socket, slim housing (ORing IGPS-1411GTP-24V) Insulating tape red PVC
Carrier - plasticized PVC film
Adhesive - acrylic
Thickness - 0.15 mm
Widths - 15 mm
Tensile strength - 25 N/cm
Elongation at break - 190%
Adhesion on steel - 2.0 N/cm
Breakdown voltage - > 40 kV/mm
Temperature range - -10 up to 105 degree C
Certificates - VDE,
OVE,
CEBEC
Complies with - EN 60 454-3-1F-PVC / 105 / A-Tx Type 10
DIP-Switch
DIP-Switch 1 Power-1 failed warning - (ON) enable,
(OFF) disable
-
DIP-Switch 2 Power-2 failed warning - (ON) enable,
(OFF) disable
-
Environmental
Storage Temperature -40÷85°C (-40÷185°F) -
Operating Temperature -40÷60°C (-40÷140°F) -
Operating Humidity 5%÷95% Non-condensing -
Fault contact
Relay Relay output to carry capacity of 1A at 24VDC -
LED Indicators
Power indicator Green - Power LED x 2 -
Fault indicator Amber - Indicate PWR1 or PWR2 failure -
10/100/1000Base-T(X) RJ45 port indicator and PoE Indicator (P1÷P4) Green for port Link/Act.,
Green for power injected
-
10/100/1000Base-T(X) RJ45 port Indicator (P5) Green for port Link/Act.,
Amber for 100Mbps Indicator
-
100/1000Base-X SFP port indicator Green for port Link/Act. -
Physical Characteristic
Enclosure IP-30 -
Dimension (W x D x H) 41 (W) x 94.9 (D) x 144.3(H) mm -
Weight 580 g -
Physical Ports
10/100/1000 Base-T(X) Ports in RJ45 Auto MDI/MDIX with PoE+ (P.S.E.) 4 -
10/100/1000 Base-T(X) Ports in RJ45 Auto MDI/MDIX 1 -
100/1000Base-X SFP port 1 -
Power
Input power Dual DC inputs. 12~36VDC on 6-pin terminal block -
Power consumption (typical) 6.5W -
Overload current protection present -
Reverse polarity protection not present -
Regulatory approvals
EMI FCC Part 15,
CISPR (EN55022) class A
-
EMS EN61000-4-2 (ESD),
EN61000-4-3 (RS),
EN61000-4-4 (EFT),
EN61000-4-5 (Surge),
EN61000-4-6 (CS),
EN61000-4-8,
EN61000-4-11
-
Shock IEC60068-2-27 -
Free Fall IEC60068-2-32 -
Vibration IEC60068-2-6 -
Safety EN60950-1 -
SFP Speed DIP-Switch
DIP-Switch 1/2 DIP-Switch 1 (ON) and DIP-Switch 2 (ON) - SFP speed setting to 100Mbps DIP-Switch 1 (OFF) and DIP-Switch 2 (OFF) - SFP speed setting to 1000Mbps -
Technology
Ethernet Standards IEEE 802.3 for 10BaseT,
IEEE 802.3u for 100BaseT(X),
IEEE 802.3ab for 1000Base-T,
IEEE 802.3x for Flow control,
802.3at PoE specyfication
-
MAC Table 1024 MAC addresses -
Processing Store-and-Forward -
Warranty
Warranty period 5 years -
Net Price 389.00 USD 0.598 USD

« return to products list