 |
 |
 |
 |
| [-]remove#06507 |
[-]remove#06595 |
[-]remove#06587 |
| Managed modular switch, L3, 24x SFP + 4 slide-in SFP+ slots 10G, O/Open-Ring <30ms (ORing RGS-PR9000-HV) |
Unmanaged switch, 6x 10/100 RJ-45 + 2x 10/1000 RJ-45 (ORing IES-1062GT) |
Smart switch, 4x 10/100 RJ-45 + 2x 100 MM SC, O-Ring <10ms (ORing IES-2042FX-MM-SC) |
| Environmental |
| Storage Temperature |
-40÷85°C(-40÷185°F)
|
-40÷85°C(-40÷185°F)
|
-40÷85°C(-40÷185°F)
|
| Operating Temperature |
10G SFP+ module absent -40 to 70°C (-40 to 158°F ),
10G SFP+ module used -20 to 60 °C (-4 to 140°F )
|
-40÷70°C (-40÷158°F)
|
-40÷70°C (-40÷158°F)
|
| Operating Humidity |
5%÷95% Non-condensing
|
5%÷95% Non-condensing
|
5%÷95% Non-condensing
|
| Fault Contact |
| Relay |
Relay output to carry capacity of 1A at 24VDC
|
Relay output to carry capacity of 1A at 24VDC
|
Relay output to carry capacity of 1A at 24VDC
|
| LED Indicators |
| Power indicator |
-
|
Green - Power LED x 3
|
-
|
| Power / Ready indicator |
-
|
-
|
Green - Ready LED x 3
|
| O-Ring indicator |
-
|
-
|
Green - Indicate system operated in O-Ring mode
|
| Power Indicator (PWR) |
Green Indicates that the system ready. The LED is blinking when the system is upgrading firmware
|
-
|
-
|
| 10/100TX RJ45 port indicator |
-
|
Green for port Link/Act,
Yellow for Duplex/Collision
|
Green for port Link/Act,
Yellow for Duplex/Collision
|
| Ring Master indicator |
Green - indicates system operated in O-Ring Master mode
|
-
|
Green - Flashing to indicate system operated in O-Ring Master mode
|
| Fiber port indicator |
-
|
-
|
Green for port Link/Act,
Yellow for Link
|
| Fault indicator |
Amber - Indicates unexpected event occurred
|
Yellow - Indicate PWR1 or PWR2 failure
|
Yellow - Indicate unexpected event occurred
|
| Supervisor Login Indicator (RMT) |
Green - System is accessed remotely
|
-
|
-
|
| Smart LED Display system |
Link/Act(LK/ACT) / Speed(SPD) / Duplex(FDX) / Remote (RMT) green LED indicator x 4
|
-
|
-
|
| Mode select Button (MODE) |
Link/Act(LK/ACT) / Speed(SPD) / Duplex(FDX) / Remote (RMT) mode select button,
Port 1 ~ 28 Link/Act(LK/ACT) LED show - Green x 28
|
-
|
-
|
| Physical Characteristic |
| Enclosure |
-
|
IP-30
|
IP-30
|
| Dimension (W x D x H) |
440mm x 356mm x 44mm
|
52mm x 106mm x 144mm
|
52mm x 106mm x 144mm
|
| Weight |
6600g
|
677g
|
670g
|
| Physical Ports |
| Slot Number |
4 (up to 3 slots for 8x1G port and 1 slot for 4x10G port)
|
-
|
-
|
| 10/100 Base-T(X) Ports in RJ45 Auto MDI/MDIX |
-
|
6
|
4
|
| RS-232 Serial Console Port |
RS-232 in RJ45 connector with console cable (115200bps 8 N 1)
|
-
|
-
|
| 100Base-FX Multimode ports (2km, 1310nm, SC connector) |
-
|
-
|
2
|
| 1000 Base-T Ports in RJ45 Auto MDI/MDIX |
-
|
2
|
-
|
| Power |
| Input power |
Dual 100~240VAC / 100~370VDC power inputs at terminal block
|
Triple DC inputs. 12÷48VDC on 7-pin terminal block,
12÷45VDC on power jack
|
Triple DC inputs. 12÷48VDC on 7-pin terminal block,
12÷45VDC on power jack
|
| Reverse polarity protection |
-
|
present on terminal block
|
present on terminal block
|
| Power consumption (typical) |
43.5W
|
7W
|
7W
|
| Overload current protection |
present
|
present
|
present
|
| Regulatory approvals |
| EMI |
FCC Part 15,
CISPR (EN55022) class A
|
FCC Part 15,
CISPR (EN55022) class A
|
FCC Part 15,
CISPR (EN55022) class A
|
| EMS |
EN61000-4-2 (ESD),
EN61000-4-3 (RS),
EN61000-4-4 (EFT),
EN61000-4-5 (Surge),
EN61000-4-6 (CS),
EN61000-4-8,
EN61000-4-11
|
EN61000-4-2 (ESD),
EN61000-4-3 (RS),
EN61000-4-4 (EFT),
EN61000-4-5 (Surge),
EN61000-4-6 (CS),
EN61000-4-8,
EN61000-4-11
|
EN61000-4-2 (ESD),
EN61000-4-3 (RS),
EN61000-4-4 (EFT),
EN61000-4-5 (Surge),
EN61000-4-6 (CS),
EN61000-4-8,
EN61000-4-11
|
| Shock |
-
|
IEC60068-2-27
|
IEC60068-2-27
|
| Free Fall |
-
|
IEC60068-2-32
|
IEC60068-2-32
|
| Vibration |
-
|
IEC60068-2-6
|
IEC60068-2-6
|
| Safety |
-
|
EN60950
|
EN60950
|
| Technology |
| Ethernet Standards |
IEEE 802.3 for 10Base-T,
IEEE 802.3u for 100Base-TX and 100Base-FX,
IEEE 802.3ab for 1000Base-T,
IEEE 802.z for 1000Base-X,
IEEE 802.3ae for 10Gigabit Ethernet,
IEEE 802.3x for Flow control,
IEEE 802.3ad for LACP (Link Aggregation Control Protocol ),
IEE |
IEEE 802.3 for 10BaseT,
IEEE 802.3u for 100BaseT(X),
IEEE 802.3ab for 1000BaseTX,
IEEE 802.3x for Flow control
|
IEEE 802.3 for 10BaseT,
IEEE 802.3u for 100BaseT(X) and 100BaseFX,
IEEE 802.3x for Flow control,
IEEE 802.1D for STP (Spanning Tree Protocol),
IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol),
IEEE 802.3ad for LACP (Link Aggregation Control Protocol)
|
| MAC Table |
8192 MAC addresses
|
8192 MAC addresses
|
2048 MAC addresses
|
| Priority Queues |
8
|
-
|
4
|
| Processing |
Store-and-Forward
|
Store-and-Forward
|
Store-and-Forward
|
| Switching latency |
7 µs
|
-
|
-
|
| Switching bandwidth |
128 Gbps
|
-
|
1.0 Gbps
|
| VLAN |
-
|
-
|
Port Based
|
| Max. Number of Available VLANs |
4095
|
-
|
-
|
| IGMP multicast groups |
128 for each VLAN
|
-
|
-
|
| Port rate limiting |
User Define
|
-
|
-
|
| Security Features |
Device Binding security feature,
Enable/disable ports,
MAC based port security,
Port based network access control (802.1x),
Single 802.1x and Multiple 802.1x,
MAC-based authentication,
QoS assignment,
Guest VLAN,
MAC address limit,
TACACS+,
VLAN (802.1Q |
-
|
Enable/disable ports,
VLAN to segregate and secure network traffic
|
| Software Features |
Hardware routing,
RIP and static routing,
IEEE 1588v2 clock synchronization,
IEEE 802.1D Bridge,
auto MAC address learning/aging and,
MAC address (static),
Multiple Registration Protocol (MRP),
MSTP (RSTP/STP compatible),
Redundant Ring (O-Ring) with rec |
Port configuration,
Port status,
Port statistics,
Port monitoring,
Port security
|
STP/RSTP (IEEE 802.1D/w),
Redundant Ring (O-Ring) with recovery time less than 10ms over 250 units,
Port configuration,
Port status,
Port statistics,
Port monitoring,
Port security
|
| Network Redundancy |
O-Ring,
Open-Ring,
O-Chain,
MRP,
MSTP(RSTP/STP compatible)
|
-
|
STP,
RSTP,
O-Ring
|
| Warranty |
| Warranty period |
5 years |
5 years |
5 years |
| Net Price |
2 030.00 USD |
205.00 USD |
435.00 USD |