MENUPRICE REDUCTIONS
- Computer Network Accessories
-
- » CABLE TESTERS#03052
Cable tester RJ-45, RJ-11 with PoE indication (NOYAFA NF-468PF)
A simple diode tester which enables checking the correctness of the plugs in computer and telephone connections. It is additionally equipped with a PoE voltage indicator.
The device uses diode indicators to inform whether and on which pairs there is PoE voltage.Tested cabling RJ45,
RJ 11Detected failures incorrect connections,
short circuits and interruptions in the wiringScanning modes normal and slow Power 9V 6F22 battery Packaging Blister Batteries not included.
#03050Cable tester RJ-45, RJ-11, BNC, USB w/external terminator (NOYAFA NF-3468)
Tested cables UTP,
STP,
USB,
coaxial,
phone cablesDetected failures incorrect connections,
short circuits and interruptions in the wiringAdditional functions Automatically recognizing terminator's impedance for 10Base-2 and 10Base-5 standards Kit includes tester,
case,
adapter for BNC terminatorsPower 9V 6F22 battery Manufacturer NOYAFA Batteries not included.
- » DIGITAL MULTIMETERS WITH LAN TESTERS
- No Calibration is needed for general measurement
- Allow User Calibration for precise measurement
- Able to measure cable made of different material
- Only need to connect the cable at one side
- Measure up to 300 meters
- Able to measure LAN cable (both 4P4C & 8P8C), Phone wire and BNC cable
- Intelligent wiremap (Shorts and Split Pairs)
- Digital and Analogue signal selectable
- Auto power off
- With display backlight and flashlight
- Sensitivity adjustable
- With Built-in Multimeter Functions
#03873Cable tester RJ-45, w/LCD, digital wire tracker, digital multimeter (WT36C)
Features:
- » ADVANCED CABLE TESTERS#03081
Cable tester RJ-45, w/LCD and 8 external terminators (NOYAFA NF-8108M)
The NF8108 cable tester is used to measure cable continuity. It enables the measurement of connection errors in UTP / STP twisted pairs. The device is equipped with an LCD display.Display LCD (53x25mm) Frequency of the audible signal 225Hz (after connecting the terminator) Max. length of the tested cabling 300m Length measuring accuracy 95% Max. current <70mA Function selection three buttons,
on / off buttonPower supply 4x1.5V (about 50 hours of work),
automatic shutdownTester dimensions 184x84x46mm Terminator dimensions 78 x 33 x 22mm Packaging cardboard box + soft case Warranty 12 months Manufacturer NOYAFA Calibration of the tester should be performed on a connector with a length of at least 10m.
The kit includes a tester, 8 numbered terminators, and a soft case.
#03807Cable tester RJ-45, w/LCD and scan detector (NOYAFA NF-300)
The NF-300 tester can detect disturbances and errors occurring in the network of coaxial, telephone, UTP and FTP cabling, categories 5, 5E, 6, 7.
The tester can measure the length of the cable, which also allows finding the exact location of its damage. The possibility of calibration increases the accuracy of the measurement.
The set is equipped with a finder that allows tonal location of pairs of wires.The batteries are not included.
#03060Cable tester RJ-45, w/LCD, digital wire tracker, WT26C
The WT26C digital wire tracker is an advanced device used for complex network cabling tests. It enables basic network cabling diagnostics- connection map, measurement of length and distance to fault.
Additionally, it is equipped with a digital and analog signal generator, enabling tracing the cable route and identifying pairs.
The device is equipped with a clear, backlit LCD display.Tested cabling RJ45,
RJ11,
BNCFunctionality location of the damage site,
cable length measurement,
short circuit detection,
interruptions,
reverse connections,
measurement of the distance to damage,
temperature compensation,
sound signalingWiring tests cable lenght,
connection map,
digital pair finder with generatorCable length measurement 300 m Measurement of the distance to damage yes Ergonomics big and clear LCD display,
automatic shutdown,
long operating timePower 1800mAh battery,
rechargable by micro USBDimensions 173x87x37 mm (main),
187x35x29 mm (reciever)The kit includes:
- main unit,
- wire pair finder
- USB A (M) - micro USB (M) connector
- crocodile clips
- RJ45-RJ45 connector
- » ACCESSORIES#04954
Transmitter for LED Patch Panel
Compatible with patchpanels:
#04941 Patch panel, 24-port, UTP, cat. 5e, 1U, 19", IDC 110, with LED
#04942 Patch panel, 24-port, UTP, cat. 6, 1U, 19", IDC 110, with LED
#04943 Patch panel, 24-port, STP, cat. 5e, 1U, 19", IDC 110, with LED
#04944 Patch panel, 24-port, STP, cat. 6, 1U, 19", IDC 110, with LED
-
