| Cable | |
|---|---|
| Shielding type / cat |
UTP cat 6a, unshielded |
| Cable construction | 4x2 (1P*7/0.15CCA)*4 + LS0H |
| Core diameter / AWG | 32 |
| Outer diameter |
3.0mm, LS0H |
| Connector | |
| RJ45 plug / molded |
8p8c unshielded, gold plated pins, flex boot |
| Impedance 100 Mhz | 100 +/-5 Ohm |
| Frequency | 100 MHz |
| Working temperature | 0°C - 60°C |
| RoHS 2011/65/EU | EN IEC 63000 |
| Standards |
EN 50173-1, ISO/IEC 11801, IEC60332-1, IEC-60603-7-5, TIA/EIA 568B |
| Cable | |
|---|---|
| Shielding type / cat |
UTP cat 6a, unshielded |
| Cable construction | 4x2 (1P*7/0.15CCA)*4 + LS0H |
| Core diameter / AWG | 32 |
| Outer diameter |
3.0mm, LS0H |
| Connector | |
| RJ45 plug / molded |
8p8c unshielded, gold plated pins, flex boot |
| Impedance 100 Mhz | 100 +/-5 Ohm |
| Frequency | 100 MHz |
| Working temperature | 0°C - 60°C |
| RoHS 2011/65/EU | EN IEC 63000 |
| Standards |
EN 50173-1, ISO/IEC 11801, IEC60332-1, IEC-60603-7-5, TIA/EIA 568B |
| Cable | |
|---|---|
| Shielding type / cat |
UTP cat 6a, unshielded |
| Cable construction | 4x2 (1P*7/0.15CCA)*4 + LS0H |
| Core diameter / AWG | 32 |
| Outer diameter |
3.0mm, LS0H |
| Connector | |
| RJ45 plug / molded |
8p8c unshielded, gold plated pins, flex boot |
| Impedance 100 Mhz | 100 +/-5 Ohm |
| Frequency | 100 MHz |
| Working temperature | 0°C - 60°C |
| RoHS 2011/65/EU | EN IEC 63000 |
| Standards |
EN 50173-1, ISO/IEC 11801, IEC60332-1, IEC-60603-7-5, TIA/EIA 568B |
| Cable | |
|---|---|
| Shielding type / cat |
UTP cat 6a, unshielded |
| Cable construction | 4x2 (1P*7/0.15CCA)*4 + LS0H |
| Core diameter / AWG | 32 |
| Outer diameter |
3.0mm, LS0H |
| Connector | |
| RJ45 plug / molded |
8p8c unshielded, gold plated pins, flex boot |
| Impedance 100 Mhz | 100 +/-5 Ohm |
| Frequency | 100 MHz |
| Working temperature | 0°C - 60°C |
| RoHS 2011/65/EU | EN IEC 63000 |
| Standards |
EN 50173-1, ISO/IEC 11801, IEC60332-1, IEC-60603-7-5, TIA/EIA 568B |
| Cable | |
|---|---|
| Shielding type / cat |
UTP cat 6a, unshielded |
| Cable construction | 4x2 (1P*7/0.15CCA)*4 + LS0H |
| Core diameter / AWG | 32 |
| Outer diameter |
3.0mm, LS0H |
| Connector | |
| RJ45 plug / molded |
8p8c unshielded, gold plated pins, flex boot |
| Impedance 100 Mhz | 100 +/-5 Ohm |
| Frequency | 100 MHz |
| Working temperature | 0°C - 60°C |
| RoHS 2011/65/EU | EN IEC 63000 |
| Standards |
EN 50173-1, ISO/IEC 11801, IEC60332-1, IEC-60603-7-5, TIA/EIA 568B |
| Cable | |
|---|---|
| Shielding type / cat |
UTP cat 6a, unshielded |
| Cable construction | 4x2 (1P*7/0.15CCA)*4 + LS0H |
| Core diameter / AWG | 32 |
| Outer diameter |
3.0mm, LS0H |
| Connector | |
| RJ45 plug / molded |
8p8c unshielded, gold plated pins, flex boot |
| Impedance 100 Mhz | 100 +/-5 Ohm |
| Frequency | 100 MHz |
| Working temperature | 0°C - 60°C |
| RoHS 2011/65/EU | EN IEC 63000 |
| Standards |
EN 50173-1, ISO/IEC 11801, IEC60332-1, IEC-60603-7-5, TIA/EIA 568B |
| HARDWARE FEATURES: | |
|---|---|
| Interface | USB 3.0/USB 2.0 |
| Antenna Type | Internal Antennas |
| Chipset | Intel Wi-Fi 7 Chipset |
| WIRELESS FEATURES: | |
| Wireless Standards | IEEE 802.11a/b/g/n/ac/ax/be |
| Signal Rate |
2882Mbps at 5GHz, 688Mbps at 2.4GHz |
| Wireless Modes | Infrastructure mode |
| Wireless Security |
WPA/WPA2/WPA3, WPA-PSK/WPA2-PSK |
| OTHERS: | |
| Dimensions | 2.83 × 0.94 × 0.42 in (72 × 24 × 10.8 mm) |
| Package Contents |
Archer TBE230U, Quick Installation Guide |
| System Requirements | Supported operating system- Windows 10, 11 |
| Environment |
Operating Temperature 0°~40° (32°~104°), Storage Temperature -40°~70° (-40°~158°), Operating Humidity 10%~90% non-condensing, Storage Humidity 5%~90% non-condensing |
| Warranty | 2 years limited warranty. Advanced replacement service is available. |
Page 6 of 11
|