MENU
NEW ITEMS
- Communication for industry
-
- » PoE SWITCHES UNMANAGED#06659
Unmanaged switch, 4x 100/1G/2.5G RJ-45 PoE + 2x1000/10G SFP+ (ORing IDGPS-C1042GP+-BT)
The IDGPS-C1042GP+-BT is an unmanaged Ethernet switch with 4 x 10/100/1000/2500Base-T(X) IEEE 802.3bt PSE ports and 2 x 1G/10GBase-X, SFP socket, offering high-speed and reliable connectivity and total power budget of 240Watts with maximum 90Watts per port. With our high power 802.3bt solution, you can easily connect and power high-power devices such as IP cameras, wireless APs, and VoIP phones without the need for separate power sources or complicated setups. Enjoy streamlined installation and reduced clutter, maximize the network's flexibility and scalability. The four 2.5 Gigabit ports are available for connecting high-speed devices. Additionally, the two 10G Ethernet ports can be utilized for uplink transmission, establishing a high-bandwidth transmission. With an extensive operating temperature range spanning from -40°C to 75°C, they effortlessly adapt to various operational environments. Renowned for their robustness, they stand as a dependable choice for Ethernet and powered device applications.Physical Ports 10/100/1000/2500 Base-T(X) Ports with P.S.E. in RJ45 Auto MDI/MDIX 4 (total power budget of 240Watts with maximum 90Watts per port) 1000/10GBase-X, SFP+ ports 2 Technology Ethernet Standards IEEE 802.3 for 10Base-T,
IEEE 802.3u for 100Base-TX,
IEEE 802.3ab for 1000Base-T,
IEEE 802.3z for 1000Base-X,
IEEE 802.3bz for 2.5GBaseT,
IEEE 802.3ae for 10G SFP+,
IEEE 802.3x for Flow control,
IEEE 802.3af/at/bt PoE specificationMAC Table 8192 MAC addresses Processing Store-and-Forward Switching latency 10 µs Switching bandwidth 60 Gbps Power Input power Dual DC inputs. 12÷48VDC on 4-pin terminal block Power consumption (typical) 10W Overload current protection present Physical Characteristic Enclosure IP-40 Dimension (W x D x H) 35 x 88 x 130 mm Environmental Storage Temperature -40÷85°C(-40÷185°F) Operating Temperature -40÷75°C (-14÷163°F) Operating Humidity 5%÷95% Non-condensing Regulatory approvals EMC CE EMC (EN 55035,
EN 55032),
FCC Part 15 BShock IEC60068-2-27 Free Fall IEC60068-2-31 Vibration IEC60068-2-6 Safety EN 62368-1 (LVD) Warranty Warranty period 5 years
- » GIGABIT ETHERNET / MANAGED SWITCHES#06571
Managed switch, 8x 10/1000 RJ-45 + 4 slide-in SFP slots, O/Open-Ring <20ms, slim housing (ORing IGS-3084GP-LA)
The IGS-3084GP-LA is a managed redundant ring Gigabit Ethernet switch with 8x10/100/1000Base-T(X) ports and 4x100/1000Base-(F)X SFP sockets. It fully supports Ethernet redundancy protocols including O-Ring (recovery time < 30ms over 250 units of connection), O-Chain, MRP, and MSTP/RSTP/STP (IEEE 802.1s/w/D), ensuring fast recovery technology to protect your mission-critical applications from network interruptions or temporary malfunctions. Another feature, O-Chain, is a revolutionary network redundancy technology that provides additional network redundancy topology for any backbone network. O-Chain allows multiple redundant network rings with different redundancy protocols to join and function together as a larger and more robust compound network topology. O-Chain enhances ease-of-use while maximizing fault-recovery speed, flexibility, compatibility, and cost-effectiveness in one set of network redundancy topology.
The IGS-3084GP-LA also supports DDM (Digital Diagnostic Monitoring) functionality, which instantly monitors the status of electronic voltage, current, and temperature. Additionally, its wide operating temperature range from -40 to 75°C ensures suitability for diverse operating environments. Therefore, these switches are among the most reliable choices for highly-managed and Fiber Ethernet applications.Physical Ports 10/100/1000 Base-T(X) Ports in RJ45 Auto MDI/MDIX 8 100/1000 SFP 4 RS-232 Serial Console Port RS-232 in RJ45 connector with console cable (115200bps 8 N 1) Technology Ethernet Standards IEEE 802.3 for 10Base-T,
IEEE 802.3u for 100Base-TX and 100Base-FX,
IEEE 802.3ab for 1000Base-T,
IEEE 802.z for 1000Base-X,
IEEE 802.3x for Flow control,
IEEE 802.3ad for LACP (Link Aggregation Control Protocol),
IEEE 802.1p for COS (Class of Service),
IEEE 802.1Q for VLAN Tagging,
IEEE 802.1D for STP (Spanning Tree Protocol),
IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol),
IEEE 802.1s for MSTP (Multiple Spanning Tree Protocol),
IEEE 802.1x for Authentication,
IEEE 802.1AB for LLDP (Link Layer Discovery Protocol)MAC Table 8192 MAC addresses Priority Queues 8 Processing Store-and-Forward Switching latency 10 µs Switching bandwidth 24 Gbps Packet buffer Size 4.1Mbits Max. Number of Available VLANs 256 IGMP multicast groups 256 for each VLAN Port rate limiting User Define Security Features Enable/disable ports,
MAC based port security,
Port based network access control (802.1x),
VLAN (802.1q ) to segregate and secure network traffic,
Radius centralized password management,
SNMPv3 encrypted authentication and access securitySoftware Features STP/RSTP (IEEE 802.1D/w),
Redundant Ring (O-Ring) with recovery time less than 30ms over 250 units,
TOS/Diffserv supported,
Quality of Service (802.1p) for real-time traffic,
VLAN (802.1Q) with VLAN tagging and GVRP supported,
IGMP Snooping for multicast filtering,
Port configuration,
Port status,
Port statistics,
Port monitoring,
Port security,
Modbus TCPNetwork Redundancy O-Ring,
Open-Ring,
O-Chain,
MRP,
MSTP (RSTP/STP compatible)LED Indicators Ring Master indicator Green - indicates system operated in O-Ring Master mode Ring Indicator Green - Indicates that the system operating in O-Ring mode,
Green Blinking - Indicates that the Ring is broken.Fault indicator Amber - Indicates unexpected event occurred 100/1000Base-X SFP Port Indicator Green for port Link/Act. 10/100/1000TX RJ45 port indicator Dual color LED - Green for 1000Mbps Link/Act indicator. Amber for 10/100Mbps Link/Act indicator Fault contact Relay Relay output to carry capacity of 1A at 24VDC Power Input power Dual DC inputs. 12~48VDC on 6-pin terminal block Power consumption (typical) 12Watts (power device not included) Overload current protection present Reverse polarity protection present Physical Characteristic Enclosure IP-30 Dimension (W x D x H) 50 (W) x 126 (D) x 146 (H)mm,
1.97 (W) x 4.96 (D) x 5.75 (H) inchEnvironmental Storage Temperature -40÷85°C(-40÷185°F) Operating Temperature -40÷70°C (-40÷158°F) Operating Humidity 5%÷95% Non-condensing Regulatory approvals EMC CE EMC (EN 55035,
EN 55032),
FCC Part 15 BEMI EN 55032,
CISPR32,
EN 61000-3-2,
EN 61000-3-3,
FCC Part 15 B class AEMS EN 55035 (IEC/EN 61000-4-2 (ESD),
IEC/EN 61000-4-3 (RS),
IEC/EN 61000-4-4 (EFT),
IEC/EN 61000-4-5 (Surge),
IEC/EN 61000-4-6 (CS),
IEC/EN61000-4-8(PFMF), IEC/EN 61000-4-11 (DIP)) Shock IEC60068-2-27 Free Fall IEC60068-2-31 Vibration IEC60068-2-6 Safety EN 62368-1 Warranty Warranty period 5 years
-
