This website uses cookies to operate basic website functions, personalise content, analyse traffic and for ad measurement purposes.
Our partners will collect data and use cookies for ad personalisation and measurement.
By continuing we assume your permission to deploy cookies, as detailed in our privacy policy. OK, Close

 
 
Communication for Industry
Thursday, 28 March
Search for product:
 FAST ETHERNET MEDIA CONVERTERS
#06648

Media converter 2x 10/100TX (RJ-45) + 1x 100FX (MM SC) (ORing IMC-121FB-MM-SC)

Physical Ports
10/100 Base-T(X) Ports in RJ45 Auto MDI/MDIX 2
100Base-FX Multimode ports (2KM, 1310nm, SC connector) 1
Technology
Ethernet Standards IEEE 802.3 for 10BaseT,
IEEE 802.3u for 100BaseT(X) and 100BaseFX
LED Indicators
Power / Ready indicator Green Ready LED x 1
10/100TX RJ45 port indicator Green for port Link/Act,
Yellow for duplex
Power
Input power 12÷48 VDC voltage power input
Power consumption (typical) 4.5W
Overload current protection present
Reverse polarity protection present on terminal block
Physical Characteristic
Enclosure IP-30
Dimension (W x H x D) 26.1mm x 95mm x 70mm
Weight 210g
Environmental
Storage Temperature -40÷85°C
Operating Temperature -40÷70°C
Operating Humidity 5%÷95% Non-condensing
Regulatory approvals
EMI FCC Part 15,
CISPR (EN55022) class A
EMS EN61000-4-2 (ESD),
EN61000-4-3 (RS),
EN61000-4-4 (EFT),
EN61000-4-5 (Surge),
EN61000-4-6 (CS),
EN61000-4-8,
EN61000-4-11
Shock IEC60068-2-27
Free Fall IEC60068-2-32
Vibration IEC60068-2-6
Safety EN60950
Warranty
Warranty period 5 years
Recommended power supply: #06674 Power supply 10W 24VDC, mini, DIN TS35 (Mean Well MDR-10-24).
ORING NETWORKING
IMC-121FB-MM-SC, Industrial mini Ethernet to fiber media converter, DIN, 2x 10/100TX (RJ-45) + 1x 100FX (MM SC)
Net Price: 161.00 USD  Unit: pcs  VAT: 23%

#08164

Media converter 2x 10/100TX (RJ-45) + 1x 100FX (SM SC) (ORing IMC-121FB-SS-SC)

Physical Ports
10/100 Base-T(X) Ports in RJ45 Auto MDI/MDIX 2
100Base-FX Singlemode ports (30KM, 1310nm, SC connector) 1
Technology
Ethernet Standards IEEE 802.3 for 10BaseT,
IEEE 802.3u for 100BaseT(X) and 100BaseFX
LED Indicators
Power / Ready indicator Green Ready LED x 1
10/100TX RJ45 port indicator Green for port Link/Act,
Yellow for duplex
Power
Input power 12÷48 VDC voltage power input
Power consumption (typical) 4.5W
Overload current protection present
Reverse polarity protection present on terminal block
Physical Characteristic
Enclosure IP-30
Dimension (W x H x D) 26.1mm x 95mm x 70mm
Weight 210g
Environmental
Storage Temperature -40÷85°C
Operating Temperature -40÷70°C
Operating Humidity 5%÷95% Non-condensing
Regulatory approvals
EMI FCC Part 15,
CISPR (EN55022) class A
EMS EN61000-4-2 (ESD),
EN61000-4-3 (RS),
EN61000-4-4 (EFT),
EN61000-4-5 (Surge),
EN61000-4-6 (CS),
EN61000-4-8,
EN61000-4-11
Shock IEC60068-2-27
Free Fall IEC60068-2-32
Vibration IEC60068-2-6
Safety EN60950
Warranty
Warranty period 5 years
Recommended power supply: #06674 Power supply 10W 24VDC, mini, DIN TS35 (Mean Well MDR-10-24).
ORING NETWORKING
IMC-121FB-SS-SC, Industrial mini Ethernet to fiber media converter, DIN, 2x 10/100TX (RJ-45) + 1x 100FX (SM SC)
Net Price: 176.00 USD  Unit: pcs  VAT: 23%

 GIGABIT ETHERNET MEDIA CONVERTERS
#07964
SELL OUT

Industrial mini type Ethernet to fiber PoE media converter LFP with 1x10/1000Base-T(X) P.S.E. and 1x1000Base-FX, SFP socket (ORing IGPMC-111GP)

Physical Ports
10/100/1000 Base-T(X) Ports in RJ45 Auto MDI/MDIX with PoE (PSE) 1
1000Base-FX (SFP) 1
Processing Store-and-Forward
Technology
Ethernet Standards IEEE 802.3 for 10BaseT,
IEEE 802.3u for 100BaseT(X) and 100BaseFX,
IEEE 802.3x for Flow control,
IEEE 802.3at PoE specification (up to 30 Watts per port for P.S.E.)
DIP-Switch setting DIP-Switch 1 for LFP mode selection - (ON) enable / (OFF) disable,
DIP-Switch 2 for Ethernet speed selection - (ON)10Mbps / (OFF) 10/100Mbps Auto-negotiate,
DIP-Switch 3 for Ethernet full/half duplex selection - (ON) Half-duplex / (OFF) Full/Half-Duplex Auto-negotiate,
DIP-Switch 4 for fiber full/half duplex selection - (ON) Half-Duplex / (OFF) Full-Duplex
LED Indicators
Power indicator Green - Power LED x 2 ( (ON) power input on-line / (OFF) power input off-line)
10/100TX RJ45 port indicator Green for port Link/Act – (ON) Link up / (Blinking) Acting / (OFF) Link down,
Amber for 100Mbps/10Mbps indicator – (ON) Working at 100Mbps / (OFF) Working at 10Mbps,
Green for port duplex indicator – (ON) Full-Duplex / (OFF) Half-Duplex
100Base-FX fiber port indicator Green for fiber port Link/Act - (ON) Link up / (Flash) Acting / (OFF) Link down,
Green for fiber port duplex indicator – (ON) Full-Duplex / (OFF) Half-Duplex
LFP statue indicator Amber LED – (ON) LFP function fail / (OFF) LFP function disable
PoE indicator Amber for P.S.E. indicator
Power
Input power Dual 50~57 VDC voltage power inputs at 4-pin terminal block
Power consumption (typical) 4 Watts (P.S.E. output included)
Overload current protection present
Reverse polarity protection present
Physical Characteristic
Enclosure IP-30
Dimension 40mm x 70mm x 95mm
Weight 291g
Environmental
Storage Temperature -40÷85°C
Operating Temperature -40÷75°C
Operating Humidity 5%÷95% Non-condensing
Regulatory approvals
EMI FCC Part 15,
CISPR (EN55022) class A,
EN50155 (EN50121-3-2,
EN55011,
EN50121-4)
EMS EN61000-4-2 (ESD),
EN61000-4-3 (RS),
EN61000-4-4 (EFT),
EN61000-4-5 (Surge),
EN61000-4-6 (CS),
EN61000-4-8,
EN61000-4-11
Shock IEC60068-2-27
Free Fall IEC60068-2-32
Vibration IEC60068-2-6
Safety EN60950-1
Warranty
Warranty period 5 years
Recommended power supply: #06676 Power supply 40W 24VDC, mini, DIN TS35 (Mean Well MDR-40-24).
In order to optimize the selection of SFP modules, please contact our Sales Department.
ORING NETWORKING
IGPMC-111GP, Industrial mini Ethernet to fiber PoE media converter, LFP, DIN, 1x10/1000Base-T(X) P.S.E. and 1x1000Base-FX, SFP socket
Net Price: 281.00 USD  Unit: pcs  VAT: 23%

#06631

Industrial mini type Ethernet to fiber PoE media converter LFP with 1x10/1000Base-T(X) P.S.E. and 1x1000Base-FX, SFP socket (ORing IGPMC-111GP-BT-24V)

The IGPMC-111GP-BT-24V is a cost-effective solution for the conversion interface between 10/100/1000Base-T(X) and 100/1000Base-X SFP socket; it allows you to extend communication distance by optical fiber. IGPMC-111GP-BT-24V supports MDI/MDIX auto detection, so you don’t need to use crossover wires. IGPMC-111GP-BT-24V also support Power over Ethernet, a system to transmit electrical power up to 90 watts, along with data, to remote devices over standard twisted-pair cable in an Ethernet network. Each IGPMC-111GP-BT-24V has 1x10/100/1000Base-T(X) P.S.E. (Power Sourcing Equipment) port to provide power in a PoE setup.

The IGPMC-111GP-BT-24V also supports the LFP (Link Fault Pass-through) feature. When one side of the link fails, the other side continues transmitting packets, and waiting for a response that never arrives from the disconnected side. Use the DIP-Switch to enable the LFP function, then IGPMC-111GP-BT-24V will force the link to shut down as soon as noticed that the other link has failed, giving the application software a chance to react to the situation.

The IGPMC-111GP-BT-24V with wide operating temperature range from -40 ~ 75oC and accepts a wide voltage range from dual 12~57 VDC power inputs, so it is suitable for harsh operating environments. Therefore, the IGPMC-111GP-BT-24V is reliable media converter with PoE capability and can satisfy most demand of operating environment.
Physical Ports
10/100/1000 Base-T(X) Ports in RJ45 Auto MDI/MDIX with PoE (PSE) 1
1000Base-FX (SFP) 1
Processing Store-and-Forward
Technology
Ethernet Standards IEEE 802.3 for 10BaseT,
IEEE 802.3u for 100BaseT(X) and 100BaseFX,
IEEE 802.3x for Flow control,
IEEE 802.3at PoE specification
DIP-Switch setting DIP-Switch 1 for LFP mode selection - (ON) enable / (OFF) disable,
DIP-Switch 2 for Ethernet speed selection - (ON)10Mbps / (OFF) 10/100Mbps Auto-negotiate,
DIP-Switch 3 for Ethernet full/half duplex selection - (ON) Half-duplex / (OFF) Full/Half-Duplex Auto-negotiate,
DIP-Switch 4 for fiber full/half duplex selection - (ON) Half-Duplex / (OFF) Full-Duplex
LED Indicators
Power indicator Green - Power LED x 2 ( (ON) power input on-line / (OFF) power input off-line)
10/100/1000TX RJ45 port indicator Green for Link/Act,
Speed LED– Green for 1000Mbps, Off-light for 100/10Mbps
100/1000Base-FX fiber port indicator Green for port Link/Act
LFP statue indicator Amber LED – (ON) LFP function fail / (OFF) LFP function disable
PoE indicator Amber for P.S.E. indicator
Power
Input power Dual 12~57 VDC voltage power inputs at 4-pin terminal block
Power consumption (typical) IEEE 802.3at(30W) mode - 12VDC,
IEEE 802.3bt( 60/90W) mode - 24VDC
Overload current protection present
Reverse polarity protection present
Physical Characteristic
Enclosure IP-30
Dimension 41mm x 70mm x 95mm
Weight 300g
Environmental
Storage Temperature -40÷85°C
Operating Temperature -40÷75°C
Operating Humidity 5%÷95% Non-condensing
Regulatory approvals
EMC EN61000-4-2 (ESD),
EN61000-4-3 (RS),
EN61000-4-4 (EFT),
EN61000-4-5 (Surge),
EN61000-4-6 (CS),
EN61000-4-8,
EN61000-4-11
EMI FEN 55032,
CISPR32,
EN 61000-3-2,
EN 61000-3-3,
FCC Part 15 B class A
EMS EN 55024 (IEC/EN 61000-4-2 (ESD Contact 4KV,
Air 8KV),
IEC/EN 61000-4-3 (RS 3V),
IEC/EN 61000-4-4 (EFT Power 0.5KV,
Signal 0.5KV),
IEC/EN 61000-4-5 (Surge Power 0.5KV,
RJ45 1KV),
IEC/EN 61000-4-6 (CS 3V),
IEC/EN 61000-4-8(PFMF)
Shock IEC60068-2-27
Free Fall IEC60068-2-31
Vibration IEC60068-2-6
Safety EN 62368-1
MTBF 1,183,306hrs
Warranty
Warranty period 5 years
In order to optimize the selection of SFP modules, please contact our Sales Department.
ORING NETWORKING
Industrial mini type Ethernet to fiber PoE media converter LFP with 1x10/1000Base-T(X) P.S.E. and 1x1000Base-FX, SFP socket (ORing IGPMC-111GP-BT-24V)
* For special orders only
Net Price: 356.00 USD  Unit: pcs  VAT: 23%

#07952

Industrial mini type Ethernet to fiber PoE media converter LFP with 1x1G/10GBase-T(X) and 1x1G/10GBase-X, SFP+ socket (ORing ITGMC-111GP+)

Physical Ports
1G/10GBase-T(X) Ports in RJ45 Auto MDI/MDIX 1
1G/10GBase-X SFP+ ports 1
Processing Store-and-Forward
Technology
Ethernet Standards IEEE 802.3ae for 10Gigabit Ethernet,
IEEE 802.3an for 10GBase-T,
IEEE 802.3ab for 1000Base-T,
IEEE 802.3z for 1000Base-X
Jumbo Frame 10k
LED Indicators
Power indicator Green - Power LED x 2
1G/10GBase-X SFP+ port indicator Green for port Link/Act
1G/10GBase-T RJ45 port indicator Green for Link/Act,
Dual color LED for speed – Green for 10Gbps,
Amber for 1Gbps
Power
Input power Dual 12~48 VDC voltage power inputs at 4-pin terminal block
Power consumption (typical) 8.6 Watts
Overload current protection present
Reverse polarity protection present
Physical Characteristic
Enclosure IP-30
Dimension 40mm x 108mm x 154mm
Weight 437g
Environmental
Storage Temperature -40÷85°C
Operating Temperature -20÷60°C
Operating Humidity 5%÷95% Non-condensing
Regulatory approvals
EMI FCC Part 15,
CISPR (EN55022) class A
EMS EN61000-4-2 (ESD),
EN61000-4-3 (RS),
EN61000-4-4 (EFT),
EN61000-4-5 (Surge),
EN61000-4-6 (CS),
EN61000-4-8,
EN61000-4-11
Shock IEC60068-2-27
Free Fall IEC60068-2-32
Vibration IEC60068-2-6
Warranty
Warranty period 5 years
In order to optimize the selection of SFP modules, please contact our Sales Department.
ORING NETWORKING
ITGMC-111GP+, Industrial mini Ethernet to fiber PoE media converter, LFP, DIN, 1x1G/10GBase-T(X) and 1x1G/10GBase-X, SFP+ socket
* For special orders only
Net Price: 727.00 USD  Unit: pcs  VAT: 23%

#06888
SELL OUT

Media converter 1x 10/1000TX (RJ-45) + 1x 1000FX (MM SC) (ORing IGMC-1011GF-MM-SC)

Physical Ports
10/1000 Base-T(X) Ports in RJ45 Auto MDI/MDIX 1
1000Base-FX Multimode ports (550m, 850nm, SC connector) 1
Technology
Ethernet Standards IEEE 802.3 for 10BaseT,
IEEE 802.3u for 100BaseT(X) and 100BaseFX,
IEEE 802.3ab for 1000Base-T,
IEEE802.3z for 1000Base-X
LED Indicators
Power / Ready indicator Green Ready LED x 2
Fault indicator Amber - Indicate power failure
10/1000TX RJ45 port indicator Green for port Link/Act,
Amber for duplex
1000X Port Indicator Green for port Link/Act
Fault contact
Relay Relay output to carry capacity of 1A at 24 VDC
Dip Switch Relay output function enable / disable by dip switch
Power
Input power Dual DC inputs. 12÷48VDC on 6-pin terminal block
Power consumption (typical) 3.5W
Overload current protection present
Reverse polarity protection present on terminal block
Physical Characteristic
Enclosure IP-30
Dimension (W x H x D) 26.1mm x 144.3mm x 94.9mm
Weight 400g
Environmental
Storage Temperature -40÷85°C
Operating Temperature -40÷70°C
Operating Humidity 5%÷95% Non-condensing
Regulatory approvals
EMI FCC Part 15,
CISPR (EN55022) class A
EMS EN61000-4-2 (ESD),
EN61000-4-3 (RS),
EN61000-4-4 (EFT),
EN61000-4-5 (Surge),
EN61000-4-6 (CS),
EN61000-4-8,
EN61000-4-11
Shock IEC60068-2-27
Free Fall IEC60068-2-32
Vibration IEC60068-2-6
Safety EN60950
Warranty
Warranty period 5 years
Recommended power supply: #06674 Power supply 10W 24VDC, mini, DIN TS35 (Mean Well MDR-10-24).
ORING NETWORKING
IGMC-1011GF-MM-SC, Industrial Slim Type Gigabit Ethernet media converter, DIN, 1x 10/1000TX (RJ-45) + 1x 1000FX (MM SC)
Net Price: 205.00 USD  Unit: pcs  VAT: 23%

#06889

Media converter 1x 10/1000TX (RJ-45) + 1x 1000FX (SM SC) (ORing IGMC-1011GF-SS-SC)

Physical Ports
10/1000 Base-T(X) Ports in RJ45 Auto MDI/MDIX 1
1000Base-FX Singlemode ports (10km, 1310nm, SC connector) 1
Technology
Ethernet Standards IEEE 802.3 for 10BaseT,
IEEE 802.3u for 100BaseT(X) and 100BaseFX,
IEEE 802.3ab for 1000Base-T,
IEEE802.3z for 1000Base-X
LED Indicators
Power / Ready indicator Green Ready LED x 2
Fault indicator Amber - Indicate power failure
10/1000TX RJ45 port indicator Green for port Link/Act,
Amber for duplex
1000X Port Indicator Green for port Link/Act
Fault contact
Relay Relay output to carry capacity of 1A at 24 VDC
Dip Switch Relay output function enable / disable by dip switch
Power
Input power Dual DC inputs. 12÷48VDC on 6-pin terminal block
Power consumption (typical) 3.5W
Overload current protection present
Reverse polarity protection present on terminal block
Physical Characteristic
Enclosure IP-30
Dimension (W x H x D) 26.1mm x 144.3mm x 94.9mm
Weight 400g
Environmental
Storage Temperature -40÷85°C
Operating Temperature -40÷70°C
Operating Humidity 5%÷95% Non-condensing
Regulatory approvals
EMI FCC Part 15,
CISPR (EN55022) class A
EMS EN61000-4-2 (ESD),
EN61000-4-3 (RS),
EN61000-4-4 (EFT),
EN61000-4-5 (Surge),
EN61000-4-6 (CS),
EN61000-4-8,
EN61000-4-11
Shock IEC60068-2-27
Free Fall IEC60068-2-32
Vibration IEC60068-2-6
Safety EN60950
Warranty
Warranty period 5 years
Recommended power supply: #06674 Power supply 10W 24VDC, mini, DIN TS35 (Mean Well MDR-10-24).
ORING NETWORKING
IGMC-1011GF-SS-SC, Industrial Slim Type Gigabit Ethernet media converter, DIN, 1x 10/1000TX (RJ-45) + 1x 1000FX (SM SC)
* For special orders only
Net Price: 320.00 USD  Unit: pcs  VAT: 23%

#06890

Media converter 1x 100/1000TX (RJ-45) + 1x 1000FX (SFP) (ORing IGMC-1011GP)

Physical Ports
100/1000 Base-T(X) Ports in RJ45 Auto MDI/MDIX 1
1000Base-FX SFP ports 1
Technology
Ethernet Standards IEEE 802.3 for 10BaseT,
IEEE 802.3u for 100BaseT(X) and 100BaseFX,
IEEE 802.3ab for 1000Base-T,
IEEE802.3z for 1000Base-X
LED Indicators
Power / Ready indicator Green Ready LED x 2
Fault indicator Amber - Indicate power failure
100/1000TX RJ45 port indicator Green for port Link/Act,
Amber for duplex
100/1000X Port Indicator Green for port Link/Act
Fault contact
Relay Relay output to carry capacity of 1A at 24 VDC
Dip Switch Relay output function enable / disable by dip switch
Power
Input power Dual DC inputs. 12÷48VDC on 6-pin terminal block
Power consumption (typical) 3.5W
Overload current protection present
Reverse polarity protection present on terminal block
Physical Characteristic
Enclosure IP-30
Dimension (W x H x D) 26.1mm x 144.3mm x 94.9mm
Weight 380g
Environmental
Storage Temperature -40÷85°C
Operating Temperature -40÷70°C
Operating Humidity 5%÷95% Non-condensing
Regulatory approvals
EMI FCC Part 15,
CISPR (EN55022) class A
EMS EN61000-4-2 (ESD),
EN61000-4-3 (RS),
EN61000-4-4 (EFT),
EN61000-4-5 (Surge),
EN61000-4-6 (CS),
EN61000-4-8,
EN61000-4-11
Shock IEC60068-2-27
Free Fall IEC60068-2-32
Vibration IEC60068-2-6
Safety EN60950
MTBF 650,069
Warranty
Warranty period 5 years
Recommended power supply: #06674 Power supply 10W 24VDC, mini, DIN TS35 (Mean Well MDR-10-24).
In order to optimize the selection of SFP modules, please contact our Sales Department.
ORING NETWORKING
IGMC-1011GP, Industrial Slim Type Gigabit Ethernet media converter, DIN, 1x 10/1000TX (RJ-45) + 1x 1000FX (SFP)
Net Price: 212.00 USD  Unit: pcs  VAT: 23%

 EN50155 COMPATIBLE CONVERTERS
#07647

Media converter 1x 100/1000TX (RJ-45) + 1x 100/1000FX (SFP) (ORing IGMC-111GPB)

Physical Ports
100/1000 Base-T(X) Ports in RJ45 Auto MDI/MDIX 1
100/1000Base-FX SFP ports 1
Technology
Ethernet Standards IEEE 802.3u for 100Base-TX and 100Base-FX,
IEEE 802.3ab for 1000Base-T,
IEEE 802.3z for 1000Base-X
LED Indicators
Power / Ready indicator Green LED x 2 (ON) power input on-line / (OFF) power input off-line
100/1000TX RJ45 port indicator LED for Link/Act and Speed indicator,
Green on only - 1000Mbps Link/Act - (ON) Link up / (Flash) Acting / (OFF) Link down,
Green and Amber on - 100Mbps Link/Act - (ON) Link up / (Flash) Acting / (OFF) Link down,
If amber on only - 10Mbps (This is not working mode)
100/1000X Port Indicator Green for port Link/Act
Power
Input power Dual DC inputs. 12÷48VDC on 4-pin terminal block
Power consumption (typical) 3.6W
Overload current protection present
Reverse polarity protection present
Physical Characteristic
Enclosure IP-30
Dimension (W x H x D) 26.1mm x 70mm x 95mm
Weight 190g
Environmental
Storage Temperature -40÷85°C
Operating Temperature -40÷70°C
Operating Humidity 5%÷95% Non-condensing
Regulatory approvals
EMI FCC Part 15,
CISPR (EN55022) class A,
EN50155 (EN50121-3-2,
EN55011,
EN50121-4)
EMS EN61000-4-2 (ESD),
EN61000-4-3 (RS),
EN61000-4-4 (EFT),
EN61000-4-5 (Surge),
EN61000-4-6 (CS),
EN61000-4-8,
EN61000-4-11
Shock IEC60068-2-27
Free Fall IEC60068-2-32
Vibration IEC60068-2-6
Safety EN60950-1
Warranty
Warranty period 5 years
ORING NETWORKING
IGMC-111GPB, Industrial mini Gigabit Ethernet to fiber media converter, DIN, 1x 100/1000TX (RJ-45) + 1x 100/1000FX (SFP)
Net Price: 212.00 USD  Unit: pcs  VAT: 23%

 IEC 61850-3 COMPATIBLE CONVERTERS
#08427

Industrial IEC 61850-3 Ethernet to fiber media converter with 1x10/100Base-T(X) to 1x100Base-FX fiber socket (ORing IMC-P111FX-MM-SC-LV)

IMC-P111 series is a cost-effective solution for the conversion between 10/100Base-T(X) and 100Base-FX interface, it allows you to extend communication distance by optical fiber. IMC-P111 series are designed for power substation application and rolling stock application, fully compliant with the requirement of IEC 61850-3 and IEEE 1613. IMC-P111 series supports MDI/MDIX auto detection, so you don’t need to use crossover wires. IMC-P111 series with wide operating temperature range from -40 ~ 85OC and accepts a wide voltage range power inputs, so it is suitable for harsh operating environments.
Therefore, the IMC-P111 series is reliable media converter and can satisfy most demand of power substation and rolling stock application.
Physical Ports
Port RJ-45 10/100 Base-TX Auto MDI/MDIX 1
Fiber port 100Base-FX Multi-mode SC 1
Processing Store-and-Forward
Technology
Ethernet Standards IEEE 802.3 for 10Base-T,
IEEE 802.3u for 100Base-T(X) and 100Base-FX,
IEEE 802.3x for Flow control
LED Indicators
Power / Ready indicator Green Ready LED x 3
10/100TX RJ45 port indicator Green for port Link/Act,
Amber for duplex
100Base-FX fiber port indicator Green for fiber port Link/Act,
Amber for duplex
LFP statue indicator Amber LED – (ON) LFP function fail / (OFF) LFP function disable
Fault indicator Amber - Indicate unexpected event occurred
Power
Input power Triple DC inputs. 12~48VDC on 7-pin terminal block,
12~45VDC on power jack
Power consumption (typical) 10.56W
Overload current protection present
Reverse polarity protection present on terminal block
Physical Characteristic
Enclosure IP-30
Dimension (W x H x D) 52mm x 106.1mm x 144.3mm
Weight 660g
Environmental
Storage Temperature -40÷85°C
Operating Temperature -40÷85°C
Operating Humidity 5%÷95% Non-condensing
Regulatory approvals
Power Automation IEC 61850-3,
IEEE 1613
EMI FCC Part 15,
CISPR (EN55022) class A,
EN50155 (EN50121-3-2,
EN55011,
EN50121-4)
EMS EN61000-4-2 (ESD),
EN61000-4-3 (RS),
EN61000-4-4 (EFT),
EN61000-4-5 (Surge),
EN61000-4-6 (CS),
EN61000-4-8,
EN61000-4-11
Shock IEC60068-2-27
Free Fall IEC60068-2-32
Vibration IEC60068-2-6
Safety EN60950
Warranty
Warranty period 5 years
IMC-111 series also support the LFP, use the DIP-Switch to enable the LFP function, and then IMC-111 series will force the link to shutdown as soon as noticed that the other link has failed, giving the application software a chance to react to the situation.
Recommended power supply: #08170 Power supply 15W 12VDC, DIN TS35 (Mean Well DR-15-12).

#08428

Industrial IEC 61850-3 Ethernet to fiber media converter with 1x10/100Base-T(X) to 1x100Base-FX fiber socket (ORing IMC-P111FX-SS-SC-LV)

IMC-P111 series is a cost-effective solution for the conversion between 10/100Base-T(X) and 100Base-FX interface, it allows you to extend communication distance by optical fiber. IMC-P111 series are designed for power substation application and rolling stock application, fully compliant with the requirement of IEC 61850-3 and IEEE 1613. IMC-P111 series supports MDI/MDIX auto detection, so you don’t need to use crossover wires. IMC-P111 series with wide operating temperature range from -40 ~ 85OC and accepts a wide voltage range power inputs, so it is suitable for harsh operating environments.
Therefore, the IMC-P111 series is reliable media converter and can satisfy most demand of power substation and rolling stock application.
Physical Ports
Port RJ-45 10/100 Base-TX Auto MDI/MDIX 1
Fiber port 100Base-FX Single-mode SC 1
Processing Store-and-Forward
Technology
Ethernet Standards IEEE 802.3 for 10Base-T,
IEEE 802.3u for 100Base-T(X) and 100Base-FX,
IEEE 802.3x for Flow control
LED Indicators
Power / Ready indicator Green Ready LED x 3
10/100TX RJ45 port indicator Green for port Link/Act,
Amber for duplex (ON) Full-Duplex / (OFF) Half-Duplex
100Base-FX fiber port indicator Green for fiber port Link/Act,
Amber for duplex (ON) Full-Duplex / (OFF) Half-Duplex
LFP statue indicator Amber LED – (ON) LFP function fail / (OFF) LFP function disable
Fault indicator Amber- Indicate unexpected event occurred
Power
Input power Triple DC inputs. 12~48VDC on 7-pin terminal block,
12~45VDC on power jack
Power consumption (typical) 10.08W
Overload current protection present
Reverse polarity protection present on terminal block
Physical Characteristic
Enclosure IP-30
Dimension (W x H x D) 52mm x 106.1mm x 144.3mm
Weight 660g
Environmental
Storage Temperature -40÷85°C
Operating Temperature -40÷85°C
Operating Humidity 5%÷95% Non-condensing
Regulatory approvals
Power Automation IEC 61850-3,
IEEE 1613
EMI FCC Part 15,
CISPR (EN55022) class A,
EN50155 (EN50121-3-2,
EN55011,
EN50121-4)
EMS EN61000-4-2 (ESD),
EN61000-4-3 (RS),
EN61000-4-4 (EFT),
EN61000-4-5 (Surge),
EN61000-4-6 (CS),
EN61000-4-8,
EN61000-4-11
Shock IEC60068-2-27
Free Fall IEC60068-2-32
Vibration IEC60068-2-6
Safety EN60950
Warranty
Warranty period 5 years
IMC-111 series also support the LFP, use the DIP-Switch to enable the LFP function, and then IMC-111 series will force the link to shutdown as soon as noticed that the other link has failed, giving the application software a chance to react to the situation.
Recommended power supply: #08170 Power supply 15W 12VDC, DIN TS35 (Mean Well DR-15-12).

#08429

Industrial IEC 61850-3 Ethernet to fiber media converter with 1x10/100Base-T(X) to 1x100Base-FX SFP socket (ORing IMC-P111FP-LV)

IMC-P111 series is a cost-effective solution for the conversion between 10/100Base-T(X) and 100Base-FX interface, it allows you to extend communication distance by optical fiber. IMC-P111 series are designed for power substation application and rolling stock application, fully compliant with the requirement of IEC 61850-3 and IEEE 1613. IMC-P111 series supports MDI/MDIX auto detection, so you don’t need to use crossover wires. IMC-P111 series with wide operating temperature range from -40 ~ 85 ° C and accepts a wide voltage range power inputs, so it is suitable for harsh operating environments.
Therefore, the IMC-P111 series is reliable media converter and can satisfy most demand of power substation and rolling stock application.
Physical Ports
Port RJ-45 10/100 Base-TX Auto MDI/MDIX 1
100Base-FX SFP port 1
Processing Store-and-Forward
Technology
Ethernet Standards IEEE 802.3 for 10Base-T,
IEEE 802.3u for 100Base-T(X) and 100Base-FX,
IEEE 802.3x for Flow control
LED Indicators
Power / Ready indicator Green Ready LED x 3
10/100TX RJ45 port indicator Green for port Link/Act,
Amber for duplex (ON) Full-Duplex / (OFF) Half-Duplex
100Base-FX fiber port indicator Green for fiber port Link/Act,
Amber for duplex (ON) Full-Duplex / (OFF) Half-Duplex
LFP statue indicator Amber LED – (ON) LFP function fail / (OFF) LFP function disable
Fault indicator Amber- Indicate unexpected event occurred
Power
Input power Triple DC inputs. 12~48VDC on 7-pin terminal block,
12~45VDC on power jack
Power consumption (typical) 10.56W
Overload current protection present
Reverse polarity protection present on terminal block
Physical Characteristic
Enclosure IP-30
Dimension (W x H x D) 52mm x 106.1mm x 144.3mm
Weight 650g
Environmental
Storage Temperature -40÷85°C
Operating Temperature -40÷85°C
Operating Humidity 5%÷95% Non-condensing
Regulatory approvals
Power Automation IEC 61850-3,
IEEE 1613
EMI FCC Part 15,
CISPR (EN55022) class A,
EN50155 (EN50121-3-2,
EN55011,
EN50121-4)
EMS EN61000-4-2 (ESD),
EN61000-4-3 (RS),
EN61000-4-4 (EFT),
EN61000-4-5 (Surge),
EN61000-4-6 (CS),
EN61000-4-8,
EN61000-4-11
Shock IEC60068-2-27
Free Fall IEC60068-2-32
Vibration IEC60068-2-6
Safety EN60950
Warranty
Warranty period 5 years
IMC-111 series also support the LFP, use the DIP-Switch to enable the LFP function, and then IMC-111 series will force the link to shutdown as soon as noticed that the other link has failed, giving the application software a chance to react to the situation.
Recommended power supply: #08170 Power supply 15W 12VDC, DIN TS35 (Mean Well DR-15-12).
In order to optimize the selection of SFP modules, please contact our Sales Department.

 CARD TYPE CONVERTERS AND CHASSIS
#08440

Media converter 1x 10/100Base-TX + 1x 100Base-FX fiber (MM SC), card type (ORing RMC-111FB-MM)

RMC-111 series is industrial rack mount card type Ethernet to fiber media converter for rack-mounted chassis box of RMC-1000 (#08437), that supports hot-swappable and easy installation to RMC-1000. RMC-111 series is a cost-effective solution for the conversion between 10/100Base-T(X) and 100Base-FX interface, it allows you to extend communication distance by optical fiber. RMC-111 series supports MDI/MDIX auto detection, so you don’t need to use crossover wires.
Physical Ports
RJ-45 10/100 Base-TX Auto MDI/MDIX 1
100 Base-FX Multi-mode (2KM, 1310nm, SC connector) 1
Processing Store-and-Forward
Technology
Ethernet Standards IEEE 802.3 for 10BaseT,
IEEE 802.3u for 100BaseT(X) and 100BaseFX,
IEEE 802.3x for Flow control
LED Indicators
Power indicator Green Power LED x 2
10/100TX RJ45 port indicator Green for port Link/Act – (ON) Link up / (Blinking) Acting / (OFF) Link down,
Amber for 100Mbps/10Mbps indicator – (ON) Link at 100Mbps / (OFF) Link at 10Mbps,
Green for port duplex indicator – (ON) Full-Duplex / (OFF) Half-Duplex
100Base-FX Fiber Port Indicator Green for fiber port Link/Act - (ON) Link up / (Flash) Acting / (OFF) Link down,
Green for fiber port duplex indicator – (ON) Full-Duplex / (OFF) Half-Duplex
LFP status indicator Amber LED – (ON) LFP function fail / (OFF) LFP function disable
Power
Power consumption (typical) 2.2W
Reverse polarity protection present
Physical Characteristic
Dimension (W x H x D) 21.8mm x 73.1mm x 126mm
Weight 145g
Environmental
Storage Temperature -40÷85°C
Operating Temperature -10÷60°C
Operating Humidity 5%÷95% Non-condensing
Regulatory approvals
EMI FCC Part 15,
CISPR (EN55022) class A
EMS EN61000-4-2 (ESD),
EN61000-4-3 (RS),
EN61000-4-4 (EFT),
EN61000-4-5 (Surge),
EN61000-4-6 (CS),
EN61000-4-8,
EN61000-4-11
Shock IEC60068-2-27
Free Fall IEC60068-2-32
Vibration IEC60068-2-6
Warranty
Warranty period 2 years
IMC-111 series also support the LFP, Use the DIP-Switch to enable the LFP function, and then IMC-111 series will force the link to shutdown as soon as noticed that the other link has failed, giving the application software a chance to react to the situation. Therefore, the RMC-111 series to collocate RMC-1000 (#08437) is reliable media converter and can satisfy most demand of operating environment.
Recommended power supply: #06674 Power supply 10W 24VDC, mini, DIN TS35 (Mean Well MDR-10-24).
ORING NETWORKING
RMC-111FB-MM, Industrial Rack-mount card type Ethernet to fiber media converter, 1x 10/100Base-TX + 1x 100Base-FX fiber (MM SC)
* For special orders only
Net Price: 182.00 USD  Unit: pcs  VAT: 23%

#08442

Media converter 1x 10/100Base-TX + 1x 100Base-FX fiber (SFP), card type (ORing RMC-111PB) LFP

RMC-111 series is industrial rack mount card type Ethernet to fiber media converter for rack-mounted chassis box of RMC-1000, that supports hot-swappable and easy installation to RMC-1000 (#08437). RMC-111 series is a cost-effective solution for the conversion between 10/100Base-T(X) and 100Base-FX interface, it allows you to extend communication distance by optical fiber. RMC-111 series supports MDI/MDIX auto detection, so you don’t need to use crossover wires.
Physical Ports
RJ-45 10/100 Base-TX Auto MDI/MDIX 1
100Base-FX (SFP) 1
Processing Store-and-Forward
Technology
Ethernet Standards IEEE 802.3 for 10BaseT,
IEEE 802.3u for 100BaseT(X) and 100BaseFX,
IEEE 802.3x for Flow control
LED Indicators
Power indicator Green Power LED x 2
10/100TX RJ45 port indicator Green for port Link/Act – (ON) Link up / (Blinking) Acting / (OFF) Link down,
Amber for 100Mbps/10Mbps indicator – (ON) Link at 100Mbps / (OFF) Link at 10Mbps,
Green for port duplex indicator – (ON) Full-Duplex / (OFF) Half-Duplex
100Base-FX Fiber Port Indicator Green for fiber port Link/Act - (ON) Link up / (Flash) Acting / (OFF) Link down,
Green for fiber port duplex indicator – (ON) Full-Duplex / (OFF) Half-Duplex
LFP status indicator Amber LED – (ON) LFP function fail / (OFF) LFP function disable
Power
Power consumption (typical) 2.2W
Reverse polarity protection present
Physical Characteristic
Dimension (W x H x D) 21.8mm x 73.1mm x 126mm
Weight 140g
Environmental
Storage Temperature -40÷85°C
Operating Temperature -10÷60°C
Operating Humidity 5%÷95% Non-condensing
Regulatory approvals
EMI FCC Part 15,
CISPR (EN55022) class A
EMS EN61000-4-2 (ESD),
EN61000-4-3 (RS),
EN61000-4-4 (EFT),
EN61000-4-5 (Surge),
EN61000-4-6 (CS),
EN61000-4-8,
EN61000-4-11
Shock IEC60068-2-27
Free Fall IEC60068-2-32
Vibration IEC60068-2-6
Warranty
Warranty period 2 years
IMC-111 series also support the LFP, use the DIP-Switch to enable the LFP function, and then IMC-111 series will force the link to shutdown as soon as noticed that the other link has failed, giving the application software a chance to react to the situation. Therefore, the RMC-111 series to collocate RMC-1000 (#08437) is reliable media converter and can satisfy most demand of operating environment.
Recommended power supply: #06674 Power supply 10W 24VDC, mini, DIN TS35 (Mean Well MDR-10-24).
In order to optimize the selection of SFP modules, please contact our Sales Department.
ORING NETWORKING
RMC-111PB, Industrial Rack mount card type Ethernet to fiber media converter, 1x 10/100Base-TX + 1x 100Base-FX fiber (SFP), LFP
* For special orders only
Net Price: 142.00 USD  Unit: pcs  VAT: 23%

#08441

Media converter 1x 10/100Base-TX + 1x 100Base-FX fiber (SM SC), card type (ORing RMC-111FB-SS)

RMC-111 series is industrial rack mount card type Ethernet to fiber media converter for rack-mounted chassis box of RMC-1000 (#08437), that supports hot-swappable and easy installation to RMC-1000. RMC-111 series is a cost-effective solution for the conversion between 10/100Base-T(X) and 100Base-FX interface, it allows you to extend communication distance by optical fiber. RMC-111 series supports MDI/MDIX auto detection, so you don’t need to use crossover wires.
Physical Ports
RJ-45 10/100 Base-TX Auto MDI/MDIX 1
100 Base-FX Single-mode (30KM, 1310nm, SC connector) 1
Processing Store-and-Forward
Technology
Ethernet Standards IEEE 802.3 for 10BaseT,
IEEE 802.3u for 100BaseT(X) and 100BaseFX,
IEEE 802.3x for Flow control
LED Indicators
Power indicator Green Power LED x 2
10/100TX RJ45 port indicator Green for port Link/Act – (ON) Link up / (Blinking) Acting / (OFF) Link down,
Amber for 100Mbps/10Mbps indicator – (ON) Link at 100Mbps / (OFF) Link at 10Mbps,
Green for port duplex indicator – (ON) Full-Duplex / (OFF) Half-Duplex
100Base-FX Fiber Port Indicator Green for fiber port Link/Act - (ON) Link up / (Flash) Acting / (OFF) Link down,
Green for fiber port duplex indicator – (ON) Full-Duplex / (OFF) Half-Duplex
LFP status indicator Amber LED – (ON) LFP function fail / (OFF) LFP function disable
Power
Power consumption (typical) 2.2W
Reverse polarity protection present
Physical Characteristic
Dimension (W x H x D) 21.8mm x 73.1mm x 126mm
Weight 145g
Environmental
Storage Temperature -40÷85°C
Operating Temperature -10÷60°C
Operating Humidity 5%÷95% Non-condensing
Regulatory approvals
EMI FCC Part 15,
CISPR (EN55022) class A
EMS EN61000-4-2 (ESD),
EN61000-4-3 (RS),
EN61000-4-4 (EFT),
EN61000-4-5 (Surge),
EN61000-4-6 (CS),
EN61000-4-8,
EN61000-4-11
Shock IEC60068-2-27
Free Fall IEC60068-2-32
Vibration IEC60068-2-6
Warranty
Warranty period 2 years
IMC-111 series also support the LFP, use the DIP-Switch to enable the LFP function, and then IMC-111 series will force the link to shutdown as soon as noticed that the other link has failed, giving the application software a chance to react to the situation. Therefore, the RMC-111 series to collocate RMC-1000 (#08437) is reliable media converter and can satisfy most demand of operating environment.
Recommended power supply: #06674 Power supply 10W 24VDC, mini, DIN TS35 (Mean Well MDR-10-24).
ORING NETWORKING
RMC-111FB-SS, Industrial Rack-mount card type Ethernet to fiber media converter, 1x 10/100Base-TX + 1x 100Base-FX fiber (SM SC)
* For special orders only
Net Price: 193.00 USD  Unit: pcs  VAT: 23%

#08443

Media converter 1x 100/1000TX (RJ-45) + 1x 100/1000FX (SFP) card type (ORing RGMC-111GPB)

RGMC-111GPB is industrial rack mount card type Ethernet to fiber media converter for rack-mounted chassis box of RMC-1000, that supports hot-swappable and easy installation to RMC-1000 (#08437). RGMC-111GPB is a cost-effective solution for the conversion between 100/1000Base-T(X) and 100/1000Base-X SFP interface, it allows you to extend communication distance by optical fiber. RGMC-111GPB supports MDI/MDIX auto detection, so you don’t need to use crossover wires. Therefore, the RGMC-111GPB to collocate RMC-1000 is reliable media converter and can satisfy most demand of operating environment.
Physical Ports
100/1000Base-T(X) Ports in RJ45 Auto MDI/MDIX 1
100/1000Base-FX SFP port 1
Technology
Ethernet Standards IEEE 802.3u for 100Base-TX and 100Base-FX,
IEEE 802.3ab for 1000Base-T,
IEEE 802.3z for 1000Base-X
Processing Store-and-Forward
DIP-Switch 1/2 DIP-Switch 1 (ON) and DIP-Switch 2 (ON) - SFP speed setting to 100Mbps,
DIP-Switch 1 (OFF) and DIP-Switch 2 (OFF) - SFP speed setting to 1000Mbps
LED Indicators
Power indicator Green Power LED x 1
10/100Base-T(X) RJ45 port indicator Green only - 1000Mbps Link/Act - (ON) Link up / (Flash) Acting / (OFF) Link down,
Green and Amber - 100Mbps Link/Act - (ON) Link up / (Flash) Acting / (OFF) Link down
*Note - If amber on only - 10Mbps (This is not avail mode)
100/1000Base-(F)X fiber port indicator Green for fiber port Link/Act - (ON) Link up / (Flash) Acting / (OFF) Link down
Power
Power consumption (typical) 3.6W
Overload current protection present
Physical Characteristic
Dimension (W x H x D) 21.8mm x 66.5mm x 126mm
Weight 125g
Environmental
Storage Temperature -40÷85°C
Operating Temperature -10÷60°C
Operating Humidity 5%÷95% Non-condensing
Regulatory approvals
EMI FCC Part 15,
CISPR (EN55022) class A,
EN50155 (EN50121-3-2,
EN55011,
EN50121-4)
EMS EN61000-4-2 (ESD),
EN61000-4-3 (RS),
EN61000-4-4 (EFT),
EN61000-4-5 (Surge),
EN61000-4-6 (CS),
EN61000-4-8,
EN61000-4-11
Shock IEC60068-2-27
Free Fall IEC60068-2-32
Vibration IEC60068-2-6
Warranty
Warranty period 2 years
Recommended power supply: #06674 Power supply 10W 24VDC, mini, DIN TS35 (Mean Well MDR-10-24).
In order to optimize the selection of SFP modules, please contact our Sales Department.
ORING NETWORKING
RGMC-111GPB, Industrial Rack mount card type Ethernet to fiber media converter, 1x 100/1000TX (RJ-45) + 1x 100/1000FX (SFP)
* For special orders only
Net Price: 212.00 USD  Unit: pcs  VAT: 23%

#08438

Media converter 2x 10/100TX (RJ-45) + 1x 100FX (MM SC) card type (ORing RMC-121FB-MM)

RMC-121FB series is industrial rack mount card type Ethernet to fiber media converter for rack-mounted chassis box of RMC-1000, that supports hot-swappable and easy installation to RMC-1000 (#08437).
RMC-121FB series provide media conversion between 2x10/100Base-T(X) and 1x100Base-FX. RMC-121 series allows you to extend communication distance by optical fiber. RMC-121FB series supports MDI/MDIX auto detection, so you don’t need to use crossover wires. Therefore, the RMC-121FB series to collocate RMC-1000 is reliable media converter and can satisfy most demand of operating environment.
Physical Ports
10/100 Base-T(X) Ports in RJ45 Auto MDI/MDIX 2
100Base-FX Multimode ports (2KM, 1310nm, SC connector) 1
Technology
Ethernet Standards IEEE 802.3 for 10Base-T,
IEEE 802.3u for 100Base-TX and 100Base-FX,
IEEE 802.3xfor flow control
Processing Store-and-Foward
LED Indicators
Power Indicator Green Power LED x 1
10/100TX RJ45 port indicator Green for port Link/Act.,
Amber for Duplex/Collision
100Base-FX Fiber Port Indicator Green for fiber port Link/Act
Power
Power consumption (typical) 4.5W
Overload current protection present
Physical Characteristic
Dimension (W x H x D) 21.8mm x 73.1mm x 126mm
Weight 137g
Environmental
Storage Temperature -40÷85°C
Operating Temperature -10÷60°C
Operating Humidity 5%÷95% Non-condensing
Regulatory approvals
EMI FCC Part 15,
CISPR (EN55022) class A
EMS EN61000-4-2 (ESD),
EN61000-4-3 (RS),
EN61000-4-4 (EFT),
EN61000-4-5 (Surge),
EN61000-4-6 (CS),
EN61000-4-8,
EN61000-4-11
Shock IEC60068-2-27
Free Fall IEC60068-2-32
Vibration IEC60068-2-6
Warranty
Warranty period 2 years
Recommended power supply: #06674 Power supply 10W 24VDC, mini, DIN TS35 (Mean Well MDR-10-24).
ORING NETWORKING
RMC-121FB-MM, Industrial Rack mount card type Ethernet to fiber media converter, 2x 10/100TX (RJ-45) + 1x 100FX (MM SC)
* For special orders only
Net Price: 182.00 USD  Unit: pcs  VAT: 23%

#08439

Media converter 2x 10/100TX (RJ-45) + 1x 100FX (SM SC) card type (ORing RMC-121FB-SS)

RMC-121FB series is industrial rack mount card type Ethernet to fiber media converter for rack-mounted chassis box of RMC-1000, that supports hot-swappable and easy installation to RMC-1000. RMC-121FB series provide media conversion between 2x10/100Base-T(X) and 1x100Base-FX. RMC-121 series allows you to extend communication distance by optical fiber. RMC-121FB series supports MDI/MDIX auto detection, so you don’t need to use crossover wires. Therefore, the RMC-121FB series to collocate RMC-1000 is reliable media converter and can satisfy most demand of operating environment.
Physical Ports
10/100 Base-T(X) Ports in RJ45 Auto MDI/MDIX 2
100Base-FX Singlemode ports (30KM, 1310nm, SC connector) 1
Technology
Ethernet Standards IEEE 802.3 for 10Base-T,
IEEE 802.3u for 100Base-TX and 100Base-FX,
IEEE 802.3xfor flow control
Processing Store-and-Foward
LED Indicators
Power Indicator Green Power LED x 1
10/100TX RJ45 port indicator Green for port Link/Act.,
Amber for Duplex/Collision
100Base-FX Fiber Port Indicator Green for fiber port Link/Act
Power
Power consumption (typical) 4.5W
Overload current protection present
Physical Characteristic
Dimension (W x H x D) 21.8mm x 73.1mm x 126mm
Weight 137g
Environmental
Storage Temperature -40÷85°C
Operating Temperature -10÷60°C
Operating Humidity 5%÷95% Non-condensing
Regulatory approvals
EMI FCC Part 15,
CISPR (EN55022) class A
EMS EN61000-4-2 (ESD),
EN61000-4-3 (RS),
EN61000-4-4 (EFT),
EN61000-4-5 (Surge),
EN61000-4-6 (CS),
EN61000-4-8,
EN61000-4-11
Shock IEC60068-2-27
Free Fall IEC60068-2-32
Vibration IEC60068-2-6
Warranty
Warranty period 2 years
Recommended power supply: #06674 Power supply 10W 24VDC, mini, DIN TS35 (Mean Well MDR-10-24).
ORING NETWORKING
RMC-121FB-SS, Industrial Rack mount card type Ethernet to fiber media converter, 2x 10/100TX (RJ-45) + 1x 100FX (SM SC)
* For special orders only
Net Price: 193.00 USD  Unit: pcs  VAT: 23%

#08437

Media converter chassis, 18 slots, RACK-MOUNT (ORing RMC-1000)

Physical Ports
Slot number 18
Power
Input power Two optional 100~240VAC power inputs
Overload current protection present
Physical Characteristic
Dimension (W x H x D) 430mm x 243mm x 132mm
Weight 4955g
Environmental
Storage Temperature -40÷85°C
Operating Temperature -10÷60°C
Operating Humidity 5%÷95% Non-condensing
Regulatory approvals
EMI FCC Part 15,
CISPR (EN55022) class A
EMS EN61000-4-2 (ESD),
EN61000-4-3 (RS),
EN61000-4-4 (EFT),
EN61000-4-5 (Surge),
EN61000-4-6 (CS),
EN61000-4-8,
EN61000-4-11
Shock IEC60068-2-27
Free Fall IEC60068-2-32
Vibration IEC60068-2-6
MTBF (Hours) (MIL-HDBK-217F2, GB, GC, 25°C ) 870520
Warranty
Warranty period 5 years
Products supports hot-swappable and easy installation to RMC-1000:
#08438 Media converter 2x 10/100TX (RJ-45) + 1x 100FX (MM SC) card type (ORing RMC-121FB-MM)
#08439 Media converter 2x 10/100TX (RJ-45) + 1x 100FX (SM SC) card type (ORing RMC-121FB-SS)
#08440 Media converter 1x 10/100Base-TX + 1x 100Base-FX fiber (MM SC), card type (ORing RMC-111FB-MM)
#08441 Media converter 1x 10/100Base-TX + 1x 100Base-FX fiber (SM SC), card type (ORing RMC-111FB-SS)
#08442 Media converter 1x 10/100Base-TX + 1x 100Base-FX fiber (SFP), card type (ORing RMC-111PB) LFP
#08443 Media converter 1x 100/1000TX (RJ-45) + 1x 100/1000FX (SFP) card type (ORing RGMC-111GPB)
#04677 Chassis Power Supply 130W (ORing RPM-130-AC)
ORING NETWORKING
RMC-1000, Industrial rack-mount Ethernet to fiber media converter Chassis with 18 slots
* For special orders only
Net Price: 827.00 USD  Unit: pcs  VAT: 23%

 SERIAL MEDIA CONVERTERS
#06892

Media converter 1x RS232 (DB9) + 1x RS-422/485 (TB, 3kV isolated) (ORing ISC-1112-I)

Physical Ports
RS-232 Connector DB9 (Female)
RS-422/485 Connector 10-pin terminal block opto-isolated to 3kV
RS-232 Signals TxD,
RxD,
GND
RS-422/485 Signals (RS422) TxD+,
TxD-,
RxD+,
RxD-
RS-422/485 Signals (RS485) Data+,
Data-,
GND
Baud Rate 300bps to 115.2Kbps
Data bit 5, 6, 7, 8
Stop bit 1, 1.5, 2
Parity None,
Even,
Odd,
Space,
Mark
Flow Control XON/XOFF (software),
Auto Hardware Direction Control for RS-485
LED Indicators
Power Indicator Green x1
TxD Indicator Green x1
RxD Indicator Green x1
Power
Input power 10÷30VDC on 10-pin terminal block
Power consumption (typical) 2.2W
Physical Characteristic
Enclosure ABS
Dimension (W x D x H) 71.2mm x 25.3mm x 100.6mm
Weight 130g
Environmental
Storage Temperature -25÷85°C
Operating Temperature -10÷70°C
Operating Humidity 5%÷95% Non-condensing
Regulatory approvals
EMI FCC Part 15,
CISPR (EN55022) class A
EMS EN61000-4-2 (ESD),
EN61000-4-3 (RS),
EN61000-4-4 (EFT),
EN61000-4-5 (Surge),
EN61000-4-6 (CS),
EN61000-4-8,
EN61000-4-11
Shock IEC60068-2-27
Free Fall IEC60068-2-32
Vibration IEC60068-2-6
Safety EN60950
Warranty
Warranty period 2 years
Recommended power supply: #06674 Power supply 10W 24VDC, mini, DIN TS35 (Mean Well MDR-10-24).
ORING NETWORKING
ISC-1112-I, Industrial RS-232 to RS-422/485 Serial Media Converter with Isolation, DIN, 1x RS232 (DB9) + 1x RS-422/485 (TB, 3kV isolated)
* For special orders only
Net Price: 124.00 USD  Unit: pcs  VAT: 23%

#08459

Media converter 1x USB (B) + 4x RS-232 slim (ORing ISC-4110U)

ISC-4110U and ISC-8110U are intelligent and compact-size media converters that provide conversion between one Universal Serial Bus (USB) port and 4 or 8 High-Speed RS-232 serial ports. The ISC-4110U and ISC-8110U feature easy connectivity for traditional serial devices. The RS-232 standard supports full-duplex communication and handshaking signals (such as RTS, CTS, DSR, DTR). Internal high-speed transient suppressors on each data line protect the modules from dangerous voltages levels or spikes. ISC-4110U/8110U can derive the power from USB port or redundant power inputs. Therefore, ISC-4110U and ISC-8110U are among the most reliable choices for USB to RS-232 media converter applications.
Physical Ports
USB Connector 1xB-type (Female),
USB v2.0
Serial ports 4xRS-232
RS-232 Signals TxD,
RxD,
RTS,
CTS,
DTR,
DSR,
DCD,
GND
Baud Rate 300 to 921.6Kbps
LED Indicators
Power Indicator Green x1
Data Transmission Indicator Green x4
Power
Input power USB bus power (self power) or Dual DC inputs by 12-48VDC on 2-pin terminal block and power jack
Power consumption (typical) 1.6W (320mA@5V USB Bus Power)
Protection
Serial Port Protection Build-in 15KV ESD protection
Driver Support
Operation System Windows 2000 (32bit),
Windows 20003/XP/Vista/2008/7 (32/64bit),
Windows Mobile 5/6,
PocketPC 2003,
WinCE 4.2~5.2/6.0,
Linux x86 (32/64bit)
Physical Characteristic
Enclosure IP-30
Dimension (W x D x H) 26.1mm x 94.9mm x 144.3mm
Weight 348g
Environmental
Storage Temperature -40÷85°C (-40÷185°F)
Operating Temperature -40÷70°C (-40÷158°F)
Operating Humidity 5%÷95% Non-condensing
Regulatory approvals
EMI FCC Part 15,
CISPR (EN55022) class A
EMS EN61000-4-2 (ESD),
EN61000-4-3 (RS),
EN61000-4-4 (EFT),
EN61000-4-5 (Surge),
EN61000-4-6 (CS),
EN61000-4-8,
EN61000-4-11
Shock IEC60068-2-27
Free Fall IEC60068-2-32
Vibration IEC60068-2-6
Safety EN60950-1
Warranty
Warranty period 5 years

#08460

Media converter 1x USB (B) + 8x RS-232 slim (ORing ISC-8110U)

ISC-4110U and ISC-8110U are intelligent and compact-size media converters that provide conversion between one Universal Serial Bus (USB) port and 4 or 8 High-Speed RS-232 serial ports. The ISC-4110U and ISC-8110U feature easy connectivity for traditional serial devices. The RS-232 standard supports full-duplex communication and handshaking signals (such as RTS, CTS, DSR, DTR). Internal high-speed transient suppressors on each data line protect the modules from dangerous voltages levels or spikes. ISC-4110U/8110U can derive the power from USB port or redundant power inputs. Therefore, ISC-4110U and ISC-8110U are among the most reliable choices for USB to RS-232 media converter applications.
Physical Ports
USB Connector 1xB-type (Female),
USB v2.0
Serial ports 8xRS-232
RS-232 Signals TxD,
RxD,
RTS,
CTS,
DTR,
DSR,
DCD,
GND
Baud Rate 300 to 921.6Kbps
LED Indicators
Power Indicator Green x1
Data Transmission Indicator Green x8
Power
Input power USB bus power (self power) or Dual DC inputs by 12-48VDC on 2-pin terminal block and power jack
Power consumption (typical) 2W (400mA@5V USB Bus Power)
Protection
Serial Port Protection Build-in 15KV ESD protection
Driver Support
Operation System Windows 2000 (32bit),
Windows 20003/XP/Vista/2008/7 (32/64bit),
Windows Mobile 5/6,
PocketPC 2003,
WinCE 4.2~5.2/6.0,
Linux x86 (32/64bit)
Physical Characteristic
Enclosure IP-30
Dimension (W x D x H) 26.1mm x 94.9mm x 144.3mm
Weight 350g
Environmental
Storage Temperature -40÷85°C (-40÷185°F)
Operating Temperature -40÷70°C (-40÷158°F)
Operating Humidity 5%÷95% Non-condensing
Regulatory approvals
EMI FCC Part 15,
CISPR (EN55022) class A
EMS EN61000-4-2 (ESD),
EN61000-4-3 (RS),
EN61000-4-4 (EFT),
EN61000-4-5 (Surge),
EN61000-4-6 (CS),
EN61000-4-8,
EN61000-4-11
Shock IEC60068-2-27
Free Fall IEC60068-2-32
Vibration IEC60068-2-6
Safety EN60950-1
Warranty
Warranty period 5 years

 INJECTORS
#06523

Industrial Gigabit High Power Injector, 1x10/1000 RJ-45 PoE + 1x10/1000 RJ-45 (ORing INJ-101GT++-60W)

The INJ-101GT++ PoE Injector series is not only an IEEE802.3at compliant device but also an advanced high power PoE injector. It is intelligent detection that provided 1-ports 10/100/1000Base-T (X) PoE outputs. The device does not turn on power until it detects a valid PoE signature from the PoE devices attached downstream on the Ethernet cable. This protection against damage to non-PoE compliant equipment which may be connected to the Ethernet cable. Therefore, only an IEEE 802.3at/802.3af compliant device can be powered with the INJ-101GT++ PoE Injector. Typically in Gigabit networks the maximum allowable CAT5 cable length is about 100 meters, due to the limitation of the Ethernet standards. The INJ-101GT++ PoE Injector can function with any PoE P.D. equipment which is fully compliant with the IEEE 802.3af/at PoE standards, and provide the DIP switch configurator for High power PoE management.
Physical Ports
10/100/1000Base-T(X) in RJ-45 Ethernet Port Input 1
10/100/1000Base-T(X) in RJ-45 Ethernet Port with P.S.E. Output 1
Operating Voltage
Input Voltage 50 ~ 57 VDC / 4-pin terminal block
Power Consumption 1 Watts (Not include PD's device)
PoE Power Budget 60 Watts max
LED Indicators
Power indicator PWR / Ready 1 x LED,
Green On - Power is on and functioning Normally
PoE Indicators 1 x LED,
Blue On - PoE Device Link,
Blue Off - None PoE Device Detected,
Blink (Blue) - Overload present
Protection
Short Circuit Protection present
Over Load Protection present
Physical Characteristic
Enclosure IP-30
Dimension (W x D x H) 26.1(W)x70(D)x95(H)mm (1.03 x 2.76 x 3.74 inch)
Weight 188g
Environmental
Storage Temperature -40÷85°C(-40÷185°F)
Operating Temperature -40÷75°C (-40÷165°F)
Operating Humidity 5%÷95% Non-condensing
Regulatory approvals
EMC EN55032,
EN55024(CE EMC),
FCC Part 15B,
EN61000-3-2,
EN61000-3-3
EMI CISPR 32,
EN55032,
FCC Part 15B class A
EMS EN61000-4-2 (ESD),
EN61000-4-3 (RS),
EN61000-4-4 (EFT),
EN61000-4-5 (Surge),
EN61000-4-6 (CS),
EN61000-4-8,
EN61000-4-11
Shock IEC60068-2-27
Free Fall IEC60068-2-32
Vibration IEC60068-2-6
Safety EN60950-1
Warranty
Warranty period 5 years
ORING NETWORKING
ORing INJ-101GT++-60W, Industrial Gigabit High Power Injector, 1x10/1000 RJ-45 PoE + 1x10/1000 RJ-45
* For special orders only
Net Price: 242.00 USD  Unit: pcs  VAT: 23%

#06506

Industrial Gigabit High Power Injector, 2x10/1000 M12 PoE (ORing TINJ-101GT-M12-24V)

ORing’s Transporter series PoE Injectors are designed for industrial applications, such as rolling stock, vehicle, and railway applications. The TINJ-101GT-M12-24V PoE Injector is an advanced IEEE802.3at compliant device with Intelligent Detection that provided 1-port 10/100/1000 Base-T(X) PoE output which is compliant with EN50155 requirement. It is specifically designed for the toughest industrial environments. TINJ-101GT-M12-24V EN50155 PoE Injector use M12 connectors to ensure tight, robust connections, and guarantee reliable operation against environmental disturbances, such as vibration and shock. The device does not turn on power until it detects a valid PoE signature from the PoE devices attached downstream on the Ethernet cable. This protection against damage to non-PoE compliant equipment which may be connected to the Ethernet cable. Because of this intelligent detection, only an IEEE 802.3at/802.3af compliant device can be powered with the TINJ-101GT-M12-24V PoE Injector. Typically, in Ethernet networks the maximum allowable CAT5 cable length is about 100 meters, due to the limitation of the Ethernet standards. Because of its 50V insertion, the installer doesn’t need to worry about voltage drops caused by cable length. The TINJ-101GT-M12-24V PoE Injector can function with any PoE P.D. equipment which is fully compliant with the IEEE 802.3at/802.3af PoE standards.
Physical Ports
10/100/1000 Base-T(X) with P.S.E. Ports in M12 Auto MDI/MDIX 1 (8-pin M12 female A-coding connector)
10/100/1000 Base-T(X) Port in M12 Auto MDI/MDIX 1 (8-pin M12 female A-coding connector)
Operating Voltage
Input Voltage Railway 24VDC (12 ~ 57 VDC) on 5-pin M12 female A-coding
Output Power 50V / 600mA,
30 Watts max. Per port
LED Indicators
Power indicator PWR / Ready 1 x LED,
Green On - Power is on and functioning Normally
PoE Indicators 1 x LED,
Blue On - PoE Device Link,
Blue Blinking - Detecting PoE Device,
Blue Off - None PoE Device Detected
Protection
Short Circuit Protection present
Over Load Protection present
Physical Characteristic
Enclosure IP-40
Dimension (W x D x H) 88.9 x 40 x 178.2 mm
Weight 446g
Environmental
Storage Temperature -40÷80°C(-40÷176°F)
Operating Temperature -25÷75°C (-13÷167°F)
Operating Humidity 5%÷90% Non-condensing
Regulatory approvals
EMC CE EMC (EN 55024,
EN 55032),
FCC Part 15 B,
EN 50155(EN 50121-1,
EN 50121-3-2)
EMI EN 55032,
CISPR32,
EN 61000-3-2,
EN 61000-3-3,
FCC Part 15 B class A
EMS IEC/EN 61000-4-2 (ESD),
IEC/EN 61000-4-3 (RS),
IEC/EN 61000-4-4 (EFT),
IEC/EN 61000-4-5 (Surge),
IEC/EN 61000-4-6 (CS),
IEC/EN 61000-4-8(PFMF),
IEC/EN 61000-4-11 (DIP))
Shock IEC60068-2-27
Free Fall IEC60068-2-31
Vibration IEC60068-2-6
Safety EN60950-1
Other EN 50155
MTBF 2,761,341 hrs.
Warranty
Warranty period 5 years
ORING NETWORKING
ORing TINJ-101GT-M12-24V, Industrial Gigabit High Power Injector, 2x10/1000 M12 PoE
* For special orders only
Net Price: 398.00 USD  Unit: pcs  VAT: 23%

#08446

Industrial Gigabit High Power Injector, 2x10/1000 RJ-45 PoE + 2x10/1000 RJ-45 (ORing INJ-102GT)

The INJ-102GT PoE Injector is an advanced IEEE802.3at compliant device with Intelligent Detection, that provided 2-ports 10/100/1000Base-T(X) PoE outputs. The device does not turn on power until it detects a valid PoE signature from the PoE devices attached downstream on the Ethernet cable. This protection against damage to non-PoE compliant equipment which may be connected to the Ethernet cable. Because of this intelligent detection, only an IEEE 802.3at/802.3af compliant device can be powered with the INJ-102GT PoE Injector. Typically in gigabit networks the maximum allowable CAT5 cable length is about 100 meters, due to the limitation of the Ethernet standards. Because of its 50~57V insertion, the installer doesn’t need to worry about voltage drops caused by cable length. The INJ-102GT PoE Injector can function with any PoE P.D. equipment which is fully compliant with the IEEE 802.3at/802.3af PoE standards.
Physical Ports
10/100/1000Base-T(X) in RJ-45 Ethernet Port Input 2
10/100/1000Base-T(X) in RJ-45 Ethernet Port with P.S.E. Output 2
Operating Voltage
Input Voltage 50 ~ 57 VDC / 4-pin terminal block
Output Power 50V / 600mA,
30 Watts max. Per port
LED Indicators
Power indicator PWR / Ready 1 x LED,
Green On - Power is on and functioning Normally
PoE Indicators 2 x LED,
Blue On - PoE Device Link,
Blue Blinking - Detecting PoE Device,
Blue Off - None PoE Device Detected
Protection
Short Circuit Protection present
Over Load Protection present
High Voltage Protection present
Physical Characteristic
Enclosure IP-30
Dimension (W x D x H) 26.1mm x 70mm x 95mm
Weight 250g
Environmental
Storage Temperature -40÷80°C(-40÷176°F)
Operating Temperature -20÷70°C (-4÷158°F)
Operating Humidity 5%÷90% Non-condensing
Regulatory approvals
EMI FCC Part 15,
CISPR (EN55022) class A
EMS EN61000-4-2 (ESD),
EN61000-4-3 (RS),
EN61000-4-4 (EFT),
EN61000-4-5 (Surge),
EN61000-4-6 (CS),
EN61000-4-8,
EN61000-4-11
Shock IEC60068-2-27
Free Fall IEC60068-2-32
Vibration IEC60068-2-6
Safety EN60950-1
Warranty
Warranty period 2 years
ORING NETWORKING
INJ-102GT, Industrial 2-port Gigabit High Power PoE Injector, DIN, 2x10/1000 RJ-45 PoE + 2x10/1000 RJ-45
* For special orders only
Net Price: 120.00 USD  Unit: pcs  VAT: 23%

#08447

Industrial Gigabit High Power Injector, 2x10/1000 RJ-45 PoE + 2x10/1000 RJ-45 (ORing INJ-102GT-24V)

The INJ-102GT PoE Injector is an advanced IEEE802.3at compliant device with Intelligent Detection, that provided 2-ports 10/100/1000Base-T(X) PoE outputs. The device does not turn on power until it detects a valid PoE signature from the PoE devices attached downstream on the Ethernet cable. This protection against damage to non-PoE compliant equipment which may be connected to the Ethernet cable. Because of this intelligent detection, only an IEEE 802.3at/802.3af compliant device can be powered with the INJ-102GT PoE Injector. Typically in gigabit networks the maximum allowable CAT5 cable length is about 100 meters, due to the limitation of the Ethernet standards. Because of its 50~57V insertion, the installer doesn’t need to worry about voltage drops caused by cable length. The INJ-102GT PoE Injector can function with any PoE P.D. equipment which is fully compliant with the IEEE 802.3at/802.3af PoE standards.
Physical Ports
10/100/1000Base-T(X) in RJ-45 Ethernet Port Input 2
10/100/1000Base-T(X) in RJ-45 Ethernet Port with P.S.E. Output 2
Operating Voltage
Input Voltage 24 ~ 57 VDC / 4-pin terminal block
Output Power 50V / 600mA,
30 Watts max. Per port
LED Indicators
Power indicator PWR / Ready 1 x LED,
Green On - Power is on and functioning Normally
PoE Indicators 2 x LED,
Blue On - PoE Device Link,
Blue Blinking - Detecting PoE Device,
Blue Off - None PoE Device Detected
Protection
Short Circuit Protection present
Over Load Protection present
High Voltage Protection present
Physical Characteristic
Enclosure IP-30
Dimension (W x D x H) 41mm x 70mm x 95mm
Weight 370g
Environmental
Storage Temperature -40÷80°C(-40÷176°F)
Operating Temperature -20÷70°C (-4÷158°F)
Operating Humidity 5%÷90% Non-condensing
Regulatory approvals
EMI FCC Part 15,
CISPR (EN55022) class A
EMS EN61000-4-2 (ESD),
EN61000-4-3 (RS),
EN61000-4-4 (EFT),
EN61000-4-5 (Surge),
EN61000-4-6 (CS),
EN61000-4-8,
EN61000-4-11
Shock IEC60068-2-27
Free Fall IEC60068-2-32
Vibration IEC60068-2-6
Safety EN60950-1
Warranty
Warranty period 2 years
ORING NETWORKING
INJ-102GT-24V,Industrial 2-port Gigabit High Power PoE Injector,24V-50V Input Support, DIN, 2x10/1000 RJ-45 PoE + 2x10/1000 RJ-45
* For special orders only
Net Price: 221.00 USD  Unit: pcs  VAT: 23%