| Physical Ports | |
|---|---|
| 10/100/1000 Base-T(X) Ports in RJ45 with P.S.E. Auto MDI/MDIX | 8 |
| 100/1000Base-X SFP Ports | 2 |
| Technology | |
| Ethernet Standards |
IEEE 802.3 for 10BaseT, IEEE 802.3u for 100BaseT(X) and 100BaseFX,, IEEE 802.3z for 1000Base-X, IEEE 802.3x for Flow control, IEEE 802.3af/at PoE specification (up to 30 Watts per port for P.S.E.) |
| MAC Table | 8k MAC addresses |
| Processing | Store-and-Forward |
| Switch Properties |
Switching latency less than 7us, Switching bandwidth 20Gbps |
| Jumbo frame | Up to 9.6K Bytes |
| Packet buffer | 4Mbit |
| LED Indicators | |
| Power indicator | Green - Power LED x 3 |
| Fault indicator | Amber - Indicate power failed even warning |
| 10/100/1000TX RJ45 port Indicator and PoE indicator (P1 ~ P4) |
Green for port Link/Act., Green for PoE power injected |
| 1000X SFP port Indicator | Green for port Link/Act |
| DIP Switch | |
| DIP-Switch 1 |
Power-1 failed warning (ON) enable, (OFF) disable |
| DIP-Switch 2 |
Power-2 failed warning (ON) enable, (OFF) disable |
| DIP-Switch 3 | DIP switch 3 and 4 (ON) SFP speed setting to 100Mbps |
| DIP-Switch 4 | DIP switch 3 and 4 (OFF) SFP speed setting to 1000Mbps(default) |
| Fault contact | |
| Relay | Relay output to carry capacity of 1A at 24VDC |
| Power | |
| Input power | Dual DC inputs. 50-57 VDC on 6-pin terminal block |
| Power consumption (typical) | 11W |
| PoE Power budget | 180W |
| Overload current protection | present |
| Reverse polarity protection | present |
| Physical Characteristic | |
| Enclosure | IP-30 |
| Dimension (W x D x H) | 54.3(W) x 108.3(D) x 145.1(H) mm (2.13x4.26x5.71 inches.) |
| Weight | 889g |
| Environmental | |
| Storage Temperature | -40÷85°C (-40÷185°F) |
| Operating Temperature | -40÷75°C (-40÷167°F) |
| Operating Humidity | 5%÷95% Non-condensing |
| Regulatory approvals | |
| EMC |
EN55032, EN55024(CE EMC), FCC Part 15B, EN61000-3-2, EN61000-3-3 |
| EMI |
CISPR 32, EN55032, FCC Part 15B class A |
| EMS |
IEC 61000-4-2 (ESD), IEC 61000-4-3 (RS), IEC 61000-4-4 (EFT), IEC 61000-4-5 (Surge), IEC 61000-4-6 (CS), IEC 61000-4-8 (PFMF), IEC 61000-4-11 (DIP) |
| Shock | IEC60068-2-27 |
| Free Fall | IEC60068-2-32 |
| Vibration | IEC60068-2-6 |
| Safety | EN60950-1 |
| Warranty | |
| Warranty period | 5 years |
| Physical Ports | |
|---|---|
| 10/100/1000 Base-T(X) Ports in RJ45 with P.S.E. Auto MDI/MDIX | 8 |
| 100/1000Base-X SFP Ports | 2 |
| Technology | |
| Ethernet Standards |
IEEE 802.3 for 10BaseT, IEEE 802.3u for 100BaseT(X) and 100BaseFX,, IEEE 802.3z for 1000Base-X, IEEE 802.3x for Flow control, IEEE 802.3af/at PoE specification (up to 30 Watts per port for P.S.E.) |
| MAC Table | 8k MAC addresses |
| Processing | Store-and-Forward |
| Switch Properties |
Switching latency less than 7us, Switching bandwidth 20Gbps |
| Jumbo frame | Up to 9.6K Bytes |
| Packet buffer | 4Mbit |
| LED Indicators | |
| Power indicator | Green - Power LED x 3 |
| Fault indicator | Amber - Indicate power failed even warning |
| 10/100/1000TX RJ45 port Indicator and PoE indicator (P1 ~ P4) |
Green for port Link/Act., Green for PoE power injected |
| 1000X SFP port Indicator | Green for port Link/Act |
| DIP Switch | |
| DIP-Switch 1 |
Power-1 failed warning (ON) enable, (OFF) disable |
| DIP-Switch 2 |
Power-2 failed warning (ON) enable, (OFF) disable |
| DIP-Switch 3 | DIP switch 3 and 4 (ON) SFP speed setting to 100Mbps |
| DIP-Switch 4 | DIP switch 3 and 4 (OFF) SFP speed setting to 1000Mbps(default) |
| Fault contact | |
| Relay | Relay output to carry capacity of 1A at 24VDC |
| Power | |
| Input power | Dual DC inputs. 12-57 VDC on 6-pin terminal block |
| Power consumption (typical) | 11W |
| PoE Power budget |
60W at 12~24VDC, 120W at 24~57VDC |
| Overload current protection | present |
| Reverse polarity protection | present |
| Physical Characteristic | |
| Enclosure | IP-30 |
| Dimension (W x D x H) | 54.3(W) x 108.3(D) x 145.1(H) mm (2.13x4.26x5.71 inches.) |
| Weight | 916g |
| Environmental | |
| Storage Temperature | -40÷85°C (-40÷185°F) |
| Operating Temperature | -40÷75°C (-40÷167°F) |
| Operating Humidity | 5%÷95% Non-condensing |
| Regulatory approvals | |
| EMC |
EN55032, EN55024(CE EMC), FCC Part 15B, EN61000-3-2, EN61000-3-3 |
| EMI |
CISPR 32, EN55032, FCC Part 15B class A |
| EMS |
IEC 61000-4-2 (ESD), IEC 61000-4-3 (RS), IEC 61000-4-4 (EFT), IEC 61000-4-5 (Surge), IEC 61000-4-6 (CS), IEC 61000-4-8 (PFMF), IEC 61000-4-11 (DIP) |
| Shock | IEC60068-2-27 |
| Free Fall | IEC60068-2-32 |
| Vibration | IEC60068-2-6 |
| Safety | EN60950-1 |
| Warranty | |
| Warranty period | 5 years |
| Physical Ports | |
|---|---|
| 100/1000 Base-T(X) Ports in RJ45 Auto MDI/MDIX | 8 w/PoE |
| 1000Base-FX SFP ports | 2 |
| Technology | |
| Ethernet Standards |
IEEE 802.3u for 100Base-TX and 100Base-FX, IEEE 802.3ab for 1000Base-T, IEEE 802.3z for 1000Base-X |
| LED Indicators |
power, RJ45 ports, SFP slots, PoE (8) |
| Power | Dual DC inputs. 48÷57VDC on 4-pin terminal block |
| Power consumption (typical) | 12W |
| Physical Characteristic | |
| Enclosure | IP-40 |
| Dimension (W x H x D) | 48mm x 142mm x 116mm |
| Weight | 600g |
| Environmental | |
| Storage Temperature | -40÷85°C |
| Operating Temperature | -40÷85°C |
| Operating Humidity | 5%÷95% Non-condensing |
| Regulatory approvals | |
| EMI |
FCC Part 15, CISPR (EN55022) class A, EN50155 (EN50121-3-2, EN55011, EN50121-4) |
| EMS |
EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11 |
| Shock | IEC60068-2-27 |
| Free Fall | IEC60068-2-32 |
| Vibration | IEC60068-2-6 |
| Safety | EN60950-1 |
| Warranty | |
| Warranty period | 5 years |
| Physical Ports | |
|---|---|
| 10/100/1000 Base-T(X) Ports in RJ45 Auto MDI/MDIX with PoE (PSE) | 8 |
| Technology | |
| Ethernet Standards |
IEEE 802.3 for 10BaseT, IEEE 802.3u for 100BaseT(X), IEEE 802.3ab for 1000Base-T, IEEE 802.3x for Flow control, 802.3at PoE specyfication |
| MAC Table | 2048 MAC addresses |
| Processing | Store-and-Forward |
| LED Indicators | |
| Power indicator | Green - Power LED x 2 |
| Fault indicator | Amber - Indicate PWR1 or PWR2 failure |
| 10/100/1000TX RJ45 port Indicator |
Green on only for 1000Mbit, Green and Amber on for 100Mbit, Amber on only for 10Mbit |
| Fault contact | |
| Relay | Relay output to carry capacity of 1A at 24VDC |
| Power | |
| Input power | Dual DC inputs. 12~36VDC on 6-pin terminal block. |
| Power consumption (typical) | 7,8W |
| Overload current protection | present |
| Reverse polarity protection | not present |
| Physical Characteristic | |
| Enclosure | IP-30 |
| Dimension (W x D x H) | 41(W) x 94.9(D) x 144.3(H) mm |
| Weight | 452 g |
| Environmental | |
| Storage Temperature | -40÷85°C (-40÷185°F) |
| Operating Temperature | -40÷70°C (-40÷158°F) |
| Operating Humidity | 5%÷95% Non-condensing |
| Regulatory approvals | |
| EMI |
FCC Part 15, CISPR (EN55022) class A |
| EMS |
EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11 |
| Shock | IEC60068-2-27 |
| Free Fall | IEC60068-2-32 |
| Vibration | IEC60068-2-6 |
| Safety | EN60950 |
| Warranty | |
| Warranty period | 5 years |
| Physical Ports | |
|---|---|
| 10/100/1000 Base-T(X) Ports in RJ45 with P.S.E. Auto MDI/MDIX | 8 |
| Technology | |
| Ethernet Standards |
IEEE 802.3 for 10BaseT, IEEE 802.3u for 100BaseT(X), IEEE 802.3ab for 1000Base-T, IEEE 802.3x for Flow control, 802.3at PoE specyfication |
| MAC Table | 2048 MAC addresses |
| Processing | Store-and-Forward |
| LED Indicators | |
| Power indicator | Green - Power LED x 2 |
| Fault indicator | Amber - Indicate PWR1 or PWR2 failure |
| 10/100/1000TX RJ45 port Indicator |
Green for port Link/Act., Green for PoE power injected |
| Fault contact | |
| Relay | Relay output to carry capacity of 1A at 24VDC |
| Power | |
| Input power | Dual DC inputs. 50VDC on 6-pin terminal block |
| Power consumption (typical) | 8W |
| PoE Power budget | 180W |
| Overload current protection | present |
| Reverse polarity protection | not present |
| Physical Characteristic | |
| Enclosure | IP-30 |
| Dimension (W x D x H) | 26.1mm x 94.9m x 144.3mm |
| Weight | 390g |
| Environmental | |
| Storage Temperature | -40÷85°C |
| Operating Temperature | -40÷70°C |
| Operating Humidity | 5%÷95% Non-condensing |
| Regulatory approvals | |
| EMI |
FCC Part 15, CISPR (EN55022) class A |
| EMS |
EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11 |
| Shock | IEC60068-2-27 |
| Free Fall | IEC60068-2-32 |
| Vibration | IEC60068-2-6 |
| Safety | EN60950-1 |
| Warranty | |
| Warranty period | 5 years |
| Physical Ports | |
|---|---|
| 10/100 Base-T(X) Ports in RJ45 Auto MDI/MDIX | 4 |
| 100Base-FX Multimode ports (2km, 1310nm, SC connector) | 1 |
| Technology | |
| Ethernet Standards |
IEEE 802.3 for 10BaseT, IEEE 802.3u for 100BaseT(X) and 100BaseFX, IEEE 802.3x for Flow control |
| MAC Table | 1024 MAC addresses |
| Processing | Store-and-Forward |
| LED Indicators | |
| Power indicator | Green - Power LED x 2 |
| Fault indicator | Yellow - Indicate PWR1 or PWR2 failure |
| 10/100TX RJ45 port indicator |
Green for port Link/Act, Yellow for Duplex/Collision |
| Fiber port indicator |
Green for port Link/Act, Yellow for Link |
| Fault contact | |
| Relay | Relay output to carry capacity of 1A at 24VDC |
| Power | |
| Input power | Dual DC inputs. 12÷48VDC on 6-pin terminal block |
| Power consumption (typical) | 5W |
| Overload current protection | present |
| Reverse polarity protection | present on terminal block |
| Physical Characteristic | |
| Enclosure | IP-30 |
| Dimension (W x D x H) | 33mm x 95mm x 144mm |
| Weight | 378g |
| Environmental | |
| Storage Temperature | -40÷85°C (-40÷185°F) |
| Operating Temperature | -40÷70°C (-40÷158°F) |
| Operating Humidity | 5%÷95% Non-condensing |
| Regulatory approvals | |
| EMI |
FCC Part 15, CISPR (EN55022) class A |
| EMS |
EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11 |
| Shock | IEC60068-2-27 |
| Free Fall | IEC60068-2-32 |
| Vibration | IEC60068-2-6 |
| Safety | EN60950 |
| Warranty | |
| Warranty period | 5 years |
| Physical Ports | |
|---|---|
| 10/100 Base-T(X) Ports in RJ45 Auto MDI/MDIX | 4 |
| 100Base-FX Singlemode ports (30km, 1310nm, SC connector) | 1 |
| Technology | |
| Ethernet Standards |
IEEE 802.3 for 10BaseT, IEEE 802.3u for 100BaseT(X) and 100BaseFX, IEEE 802.3x for Flow control |
| MAC Table | 1024 MAC addresses |
| Processing | Store-and-Forward |
| LED Indicators | |
| Power indicator | Green - Power LED x 2 |
| Fault indicator | Yellow - Indicate PWR1 or PWR2 failure |
| 10/100TX RJ45 port indicator |
Green for port Link/Act, Yellow for Duplex/Collision |
| Fiber port indicator |
Green for port Link/Act, Yellow for Link |
| Fault contact | |
| Relay | Relay output to carry capacity of 1A at 24VDC |
| Power | |
| Input power | Dual DC inputs. 12÷48VDC on 6-pin terminal block |
| Power consumption (typical) | 5W |
| Overload current protection | present |
| Reverse polarity protection | present on terminal block |
| Physical Characteristic | |
| Enclosure | IP-30 |
| Dimension (W x D x H) | 33mm x 95mm x 144mm |
| Weight | 378g |
| Environmental | |
| Storage Temperature | -40÷85°C (-40÷185°F) |
| Operating Temperature | -40÷70°C (-40÷158°F) |
| Operating Humidity | 5%÷95% Non-condensing |
| Regulatory approvals | |
| EMI |
FCC Part 15, CISPR (EN55022) class A |
| EMS |
EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11 |
| Shock | IEC60068-2-27 |
| Free Fall | IEC60068-2-32 |
| Vibration | IEC60068-2-6 |
| Safety | EN60950 |
| Warranty | |
| Warranty period | 5 years |
| Physical Ports | |
|---|---|
| 10/100 Base-T(X) Ports in RJ45 Auto MDI/MDIX | 4 |
| 100Base-FX Multimode ports (2km, 1310nm, SC connector) | 2 |
| Technology | |
| Ethernet Standards |
IEEE 802.3 for 10BaseT, IEEE 802.3u for 100BaseT(X) and 100BaseFX, IEEE 802.3x for Flow control |
| MAC Table | 1024 MAC addresses |
| Processing | Store-and-Forward |
| LED Indicators | |
| Power indicator | Green - Power LED x 2 |
| Fault indicator | Yellow - Indicate PWR1 or PWR2 failure |
| 10/100TX RJ45 port indicator |
Green for port Link/Act, Yellow for Duplex/Collision |
| Fiber port indicator |
Green for port Link/Act, Yellow for Link |
| Fault contact | |
| Relay | Relay output to carry capacity of 1A at 24VDC |
| Power | |
| Input power | Dual DC inputs. 12÷48VDC on 6-pin terminal block |
| Power consumption (typical) | 7W |
| Overload current protection | present |
| Reverse polarity protection | present on terminal block |
| Physical Characteristic | |
| Enclosure | IP-30 |
| Dimension (W x D x H) | 33mm x 95mm x 144mm |
| Weight | 382g |
| Environmental | |
| Storage Temperature | -40÷85°C (-40÷185°F) |
| Operating Temperature | -40÷70°C (-40÷158°F) |
| Operating Humidity | 5%÷95% Non-condensing |
| Regulatory approvals | |
| EMI |
FCC Part 15, CISPR (EN55022) class A |
| EMS |
EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11 |
| Shock | IEC60068-2-27 |
| Free Fall | IEC60068-2-32 |
| Vibration | IEC60068-2-6 |
| Safety | EN60950 |
| Warranty | |
| Warranty period | 5 years |
| Physical Ports | |
|---|---|
| 10/100 Base-T(X) Ports in RJ45 Auto MDI/MDIX | 4 |
| 100Base-FX Singlemode ports (30km, 1550nm, SC connector) | 2 |
| Technology | |
| Ethernet Standards |
IEEE 802.3 for 10BaseT, IEEE 802.3u for 100BaseT(X) and 100BaseFX, IEEE 802.3x for Flow control |
| MAC Table | 1024 MAC addresses |
| Processing | Store-and-Forward |
| LED Indicators | |
| Power indicator | Green - Power LED x 2 |
| Fault indicator | Yellow - Indicate PWR1 or PWR2 failure |
| 10/100TX RJ45 port indicator |
Green for port Link/Act, Yellow for Duplex/Collision |
| Fiber port indicator |
Green for port Link/Act, Yellow for Link |
| Fault contact | |
| Relay | Relay output to carry capacity of 1A at 24VDC |
| Power | |
| Input power | Dual DC inputs. 12÷48VDC on 6-pin terminal block |
| Power consumption (typical) | 7W |
| Overload current protection | present |
| Reverse polarity protection | present on terminal block |
| Physical Characteristic | |
| Enclosure | IP-30 |
| Dimension (W x D x H) | 33mm x 95mm x 144mm |
| Weight | 382g |
| Environmental | |
| Storage Temperature | -40÷85°C (-40÷185°F) |
| Operating Temperature | -40÷70°C (-40÷158°F) |
| Operating Humidity | 5%÷95% Non-condensing |
| Regulatory approvals | |
| EMI |
FCC Part 15, CISPR (EN55022) class A |
| EMS |
EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11 |
| Shock | IEC60068-2-27 |
| Free Fall | IEC60068-2-32 |
| Vibration | IEC60068-2-6 |
| Safety | EN60950 |
| Warranty | |
| Warranty period | 5 years |
| Physical Ports | |
|---|---|
| 10/100 Base-T(X) Ports in RJ45 Auto MDI/MDIX | 4 |
| 100Base-FX with SFP port | 1 |
| Technology | |
| Ethernet Standards |
IEEE 802.3 for 10BaseT, IEEE 802.3u for 100BaseT(X), IEEE 802.3x for Flow control |
| MAC Table | 1K |
| Packet buffer Size | 448Kbits |
| Processing | Store-and-Forward |
| LED Indicators | |
| Power indicator | Green - Power LED x 2 |
| Fault indicator | Yellow - Indicate PWR1 or PWR2 failure |
| 10/100TX RJ45 port indicator |
Green for port Link/Act, Yellow for Duplex/Collision |
| Fault contact | |
| Relay | Relay output to carry capacity of 1A at 24VDC |
| Power | |
| Input power | 9.6~60VDC/24VAC (18~30 VAC) on 2-pin terminal block. |
| Power consumption (typical) | 4W |
| Overload current protection | present |
| Reverse polarity protection | present |
| Physical Characteristic | |
| Enclosure | IP-40 |
| Dimension (W x D x H) | 26mm × 103mm × 64mm |
| Environmental | |
| Storage Temperature | -40÷85°C |
| Operating Temperature | -10÷60°C |
| Operating Humidity | 5%÷95% Non-condensing |
| Regulatory approvals | |
| EMI |
FCC Part 15, CISPR (EN55022) class A |
| EMS |
EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11 |
| Shock | IEC60068-2-27 |
| Free Fall | IEC60068-2-32 |
| Vibration | IEC60068-2-6 |
| Safety | EN60950 |
| Warranty | |
| Warranty period | 5 years |
Page 4 of 12
|