MENU
#06619
Managed switch, L3, 16x 10/1000 RJ-45 + 4x1G/2.5G/10G SFP+, O/Open-Ring <30ms (ORing IGS-RX164GP+)
IGS-RX164GP+ advanced Layer 3 managed redundant ring Ethernet switch with 16x10/100/1000Base-T(X) ports and 4x10GBase-X SFP ports. The IGS-RX164GP+ supports routing protocols such as static routing, RIP v1/v2, OSPF and PIM which are suitable for large scale network environment. The hardware Layer 3 switch is optimized to transmit data as fast as Layer-2 switches. With completely support of Ethernet Redundancy protocol, O-Ring (recovery time < 30ms) and MSTP (RSTP/STP compatible) can protect your mission-critical applications from network interruptions or temporary malfunctions with its fast recovery technology. And support wide operating temperature from -40°C to 60°C. IGS-RX164GP+ can also be managed centralized and convenient by Open-Vision, as well as the Web-based interface, Telnet and console (CLI) configuration. Therefore, the switch is one of the most reliable choice for highly-managed and Fiber Ethernet application.
| Physical Ports | |
|---|---|
| 10/100/1000 Base-T(X) Ports in RJ45 Auto MDI/MDIX | 16 |
| 1G/2.5G/10 SFP+ Ports | 4 |
| RS-232 Serial Console Port | RS-232 in RJ45 connector with console cable (115200bps 8 N 1) |
| Technology | |
| Ethernet Standards |
IEEE 802.3 for 10BaseT, IEEE 802.3u for 100BaseT(X) and 100BaseFX, IEEE 802.3z for 1000Base-X, IEEE 802.3ab for 1000Base-T, IEEE 802.3x for Flow control, IEEE 802.3ad for LACP (Link Aggregation Control Protocol), IEEE 802.1p for COS (Class of Service), IEEE 802.1Q for VLAN Tagging, IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol), IEEE 802.1x for Authentication, IEEE 802.1AB for LLDP (Link Layer Discovery Protocol) |
| MAC Table | 16k MAC addresses |
| Priority Queues | 8 |
| Packet Buffer | 2MB |
| Flash Memory | 512Mbits |
| DRAM Size | 8Gbits |
| Jumbo frame | Up to 10K Bytes |
| Processing | Store-and-Forward |
| Switching latency | 7 µs |
| Switching bandwidth | 112 Gbps |
| Max. Number of Available VLANs | 4096 |
| Number of VLAN IDs | VID 0 to 4095 |
| IGMP multicast groups | 128 for each VLAN |
| Port rate limiting | User Define |
| Security Features |
Enable/disable ports, MAC based port securitym Port based network access control (802.1x)m MAC-based authentication(802.1x)m VLAN (802.1Q ) to segregate and secure network traffic, Radius centralized password management, SNMPv3 encrypted authentication and access security, Web and CLI authentication and authorization, IP source guard, Https / SSH enhance network security |
| Software Features |
Routing protocols – static routing, RIP v1/v2, OSPF, PIM-SM, PIM-DM, VRRP, TSN protocols – 802.1AS, Qav, Qat, STP/RSTP/MSTP (IEEE 802.1D/w/s) Redundant Ring (O-Ring) with recovery time less than 30ms over 250 units, TOS/Diffserv supported, Quality of Service (802.1p) for real-time traffic, VLAN (802.1Q) with VLAN tagging and GVRP supported, IGMP Snooping for multicast filtering, Port configuration, Port status, Port statistics, Port monitoring, Port security |
| LED Indicators | |
| Power / Ready indicator | Green - Ready LED x 3 |
| Ring Master indicator | Green - Indicate system operated in O-Ring Master mode |
| O-Ring indicator | Green - Indicate system operated in O-Ring mode |
| Fault indicator | Amber - Indicate unexpected event occurred |
| 10/100/1000Base-T(X) RJ45 port indicator |
Green for port 1000Mbps Link/Act, Amber for 10/100Mbps Link/Act |
| 1G/10Gbase-X SFP+ Port Indicator | Green LED for Link/Act |
| Fault contact | |
| Relay | Relay output to carry capacity of 1A at 24VDC |
| Power | |
| Input power | Dual DC inputs. 12÷48VDC on 6-pin terminal block |
| Power consumption (typical) | 23W |
| Overload current protection | present |
| Reverse polarity protection | present |
| Physical Characteristic | |
| Enclosure | IP-30 |
| Dimension (W x D x H) | 116.4mm x 170mm x 180mm |
| Weight | 1530 g |
| Environmental | |
| Storage Temperature | -40÷85°C(-40÷185°F) |
| Operating Temperature | -40÷60°C (-14÷140°F) |
| Operating Humidity | 5%÷95% Non-condensing |
| Regulatory approvals | |
| EMC |
CE EMC (EN 55024, EN 55032), FCC Part 15 B |
| EMI |
EN 55032, CISPR32, EN 61000-3-2, EN 61000-3-3, FCC Part 15 B class A |
| EMS |
EN 55024 (IEC/EN 61000-4-2 (ESD Contact 8KV, Air 10KV), IEC/EN 61000-4-3 (RS),IEC/EN 61000-4-4 (EFT Power 2KV, Single 2KV), IEC/EN 61000-4-5 (Surge Power 4KV, RJ45 4KV), IEC/EN 61000-4-6 (CS), IEC/EN 61000-4-8(PFMF), IEC/EN 61000-4-11 (DIP)) |
| Shock | IEC60068-2-27 |
| Free Fall | IEC60068-2-31 |
| Vibration | IEC60068-2-6 |
| Safety | EN60950-1 |
| Warranty | |
| Warranty period | 5 years |
#07998
Unmanaged SPE switch, 4x 10 T1L + 1x 100 RJ-45 (ORing ITPS-141TX-T1L)
- Supports SPE (Single Paire Ethernet) 10Base-T1L compliant with IEEE 802.3cg standard
- Long distances point to point transmission up to 1000m
- Supports SCCP PoDL(Power over Data Line) PSE Types compliant with IEEE 802.3bu standard
- PoDL up to 50 Watts/1A per port
- Supports PoDL legacy mode
- Supports wide range 20~30VDC power input
- Supports QoS and flow control
- Rugged IP-30 housing design
ITPS-141TX-T1L is an ideal solution for factory, process automation infrastructure. The new single pair Ethernet technology can be integrated easily into an existing Ethernet infrastructure to simplify layout and also reduce the cost of cabling.
| Physical Ports | |
|---|---|
| 10Base-T1L with PoDL | 4 |
| 10/100Base-T(X) Port in RJ45 Auto MDI/MDIX | 1 |
| Technology | |
| Ethernet Standards |
IEEE 802.3 for 10BaseT, IEEE 802.3u for 100BaseT(X), IEEE 802.3x for Flow control, IEEE 802.3cg for 10Base-T1L |
| IEEE 802.3bu for PoDL | |
| MAC Table | 1K MAC addresses |
| Processing | Store-and-Forward |
| LED Indicators | |
| Power indicator | Green - Power LED |
| 10Base-T1L (PoDL) indicator |
Green for port Link/Act, Amber for PoDL PD device is connected |
| 10/100Base-T(X) RJ45 port indicator |
Green for port Link/Act., Amber for 10Mbps/ Green for 100Mbps indicator |
| PoDL | |
| 24v |
Class 10~12, up to 20W |
| 50v |
Class 13~14, up to 30W |
| Force mode | Up to 50W/1A |
| PoDL Dip switch | |
| PoDL |
On - Enable PoDL, OFF - Disable PoDL |
| SCCP mode | Turn on SCCP-based classification ensures full operating voltage is applied by the Power Sourcing Equipment (PSE) when a valid PD is connected |
| Force mode | Force enable PoDL without classification (Does NOT support hot plugging before enabling Force mode) |
| Power | |
| Input power | DC 24VDC (20~30VDC) |
| Power consumption (typical) | Max.3.47A |
| PoE | Power Budget 80Watts |
| Overload current protection | present |
| Reverse polarity protection | present |
| Physical Characteristic | |
| Enclosure | IP-30 |
| Dimension (W x D x H) | 28 x 108.3 x 145.1 mm |
| Weight | 530g |
| Environmental | |
| Storage Temperature | -40÷85°C |
| Operating Temperature | -40÷70°C |
| Operating Humidity | 5%÷95% Non-condensing |
| Regulatory approvals | |
| EMI |
FCC Part 15, CISPR (EN55032) class A |
| Warranty | |
| Warranty period | 5 years |
#07950
4x10G module, SFP+ (ORing SWM-04GP+_4)
Industrial 4-port Gigabit fiber module with 4x10G, SFP+ socket
#07963
4x1G module, SFP (ORing SWM-04GP_4)
Industrial 4-port Gigabit fiber module with 4x1G, SFP socket
#08898
8x1G module, RJ-45 (ORing SWM-80GT)
Physical Ports
Industrial 8-port Gigabit Ethernet switch module with 8x10/100/1000Base-T(X) ports
Industrial 8-port Gigabit Ethernet switch module with 8x10/100/1000Base-T(X) ports
Compatible with:
#08899 Managed modular switch, 24x 10/1000 RJ-45 + 4 slide-in SFP+ slots 10G, O/Open-Ring <30ms (ORing RGS-P9000-HV)
#08899 Managed modular switch, 24x 10/1000 RJ-45 + 4 slide-in SFP+ slots 10G, O/Open-Ring <30ms (ORing RGS-P9000-HV)
#08897
8x1G module, SFP (ORing SWM-08GP)
Industrial 8-port Gigabit fiber module with 8x100/1000Base-X, SFP socket
Compatible with:
#08899 Managed modular switch, 24x 10/1000 RJ-45 + 4 slide-in SFP+ slots 10G, O/Open-Ring <30ms (ORing RGS-P9000-HV)
#08899 Managed modular switch, 24x 10/1000 RJ-45 + 4 slide-in SFP+ slots 10G, O/Open-Ring <30ms (ORing RGS-P9000-HV)
#07965
Bypass Switch, 4x LC Duplex (ORing IBS-102FX-MM-LC)
IBS-102FX series are the external Bypass switches for 100M/1G/10G fiber optical networks. These fiber optical bypass switches protect the network from failures and subsequent maintenance by ensuring network integrity during power loss. Each of these fiber optical bypass switches includes Network ports and Monitor ports. The Network ports are used for connection to main-network connections and provide protection mechanism, and the Monitor ports are used for down-link local networking device. When the power is on, the operation mode of the Bypass switch is set to Normal, and the local networking device is connected with main-network. When power failure occurs, the Bypass switch is swiftly set to bypass mode to isolate the main-network from the local networking device.
| Physical Ports | |
|---|---|
| LC connector | 4 Duplex Multi-mode LC connector |
| Fiber Ethernet | |
| Optical Fiber | Multi-mode - 50/125μm or 62,5/125μm |
| Operating Wavelength | 780÷1350 nm |
| Insert loss | <1.0 dB |
| Switch time | < 10ms |
| DIP Switch Settings | DIP Swicth No.1 - Power-1 failed warning detection – (On) relay enable (Off) relay disable |
| DIP Switch No.2 - Power-2 failed warning detection – (On) relay enable (Off) relay disable | |
| LED Indicators | |
| Power indicator | Green - Ready LED x 2 |
| Normal indicator | Green On - Operated in normal mode |
| Fault indicator | Amber - Indicates power failure occurred |
| Fault contact | |
| Relay | Relay output for power failure warning |
| Power | |
| Input power | Dual 12~48 VDC power inputs at DC-Jack and 4-pin terminal block |
| Power consumption (typical) | 2.7W |
| Overload current protection | present |
| Reverse polarity protection | present |
| Physical Characteristic | |
| Enclosure | IP-30 |
| Dimension (W x D x H) | 26.1mm x 94.9mm x 144.3mm |
| Weight | 405g |
| Environmental | |
| Storage Temperature | -40÷85°C(-40÷185°F) |
| Operating Temperature | -20÷70°C (-4÷158°F) |
| Operating Humidity | 10%÷90% Non-condensing |
| Regulatory approvals | |
| EMI |
FCC Part 15, CISPR (EN55022) class A |
| EMS |
EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11 |
| Shock | IEC60068-2-27 |
| Free Fall | IEC60068-2-32 |
| Vibration | IEC60068-2-6 |
| MTBF (Hours) (MIL-HDBK-217F2, GB, GC, 25°C) | 1,246,758 |
| Warranty | |
| Warranty period | 1 years |
#08445
Bypass Switch, 4x LC Duplex (ORing IBS-102FX-SS-LC)
IBS-102FX series are the external Bypass switches for 100M/1G/10G fiber optical networks. These fiber optical bypass switches protect the network from failures and subsequent maintenance by ensuring network integrity during power loss. Each of these fiber optical bypass switches includes Network ports and Monitor ports. The Network ports are used for connection to main-network connections and provide protection mechanism, and the Monitor ports are used for down-link local networking device. When the power is on, the operation mode of the Bypass switch is set to Normal, and the local networking device is connected with main-network. When power failure occurs, the Bypass switch is swiftly set to bypass mode to isolate the main-network from the local networking device.
| Physical Ports | |
|---|---|
| LC connector | 4 Duplex Single-mode LC connector |
| Fiber Ethernet | |
| Optical Fiber | Single-mode - 9/125μm |
| Operating Wavelength | 1260÷1570 nm |
| Insert loss | 1.6 dB |
| Switch time | < 10ms |
| DIP Switch Settings | DIP Swicth No.1 - Power-1 failed warning detection – (On) relay enable (Off) relay disable |
| DIP Switch No.2 - Power-2 failed warning detection – (On) relay enable (Off) relay disable | |
| LED Indicators | |
| Power indicator | Green - Ready LED x 2 |
| Normal indicator | Green On - Operated in normal mode |
| Fault indicator | Amber - Indicates power failure occurred |
| Fault contact | |
| Relay | Relay output for power failure warning |
| Power | |
| Input power | Dual 12~48 VDC power inputs at DC-Jack and 4-pin terminal block |
| Power consumption (typical) | 2.7W |
| Overload current protection | present |
| Reverse polarity protection | present |
| Physical Characteristic | |
| Enclosure | IP-30 |
| Dimension (W x D x H) | 26.1mm x 94.9mm x 144.3mm |
| Weight | 405g |
| Environmental | |
| Storage Temperature | -40÷85°C(-40÷185°F) |
| Operating Temperature | -20÷70°C (-4÷158°F) |
| Operating Humidity | 10%÷90% Non-condensing |
| Regulatory approvals | |
| EMI |
FCC Part 15, CISPR (EN55022) class A |
| EMS |
EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11 |
| Shock | IEC60068-2-27 |
| Free Fall | IEC60068-2-32 |
| Vibration | IEC60068-2-6 |
| MTBF (Hours) (MIL-HDBK-217F2, GB, GC, 25°C) | 1,246,758 |
| Warranty | |
| Warranty period | 1 years |
Page 12 of 12
|
